Experimental verification for stability improvement of sensorless vector control system of induction motor using real‐time tuning of observer gain

This paper proposes a method for the design of the adaptive rotor flux observer gain to improve stability at low speed and in regenerating mode. The method is based on stability analysis, which utilizes a linearized model considering all systems, including each control loop. Therefore, the proposed method considers the effects of motor constants and control circuit constants. The stability analysis using the transfer function for the rotor speed considers the arrangement of poles and zeros and the steady‐state error. The rotor flux observer gain which improves the stability for each operating condition is ascertained. This paper also proposes a real‐time tuning method for the observer gain. The validity of the proposed method was confirmed by simulation using Matlab Simulink and by experiment. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 166(1): 67–81, 2009; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20715     

Increase of stress intensity near interface edge of elastic-creep Bi-material under a sustained load

The transition from small-scale creep to large-scale creep ahead of a crack tip or an interface edge with strong elastic stress singularity at the loading instant causes stress relaxation and the decrease of stress intensity in general. However, this study shows that the stress near the interface edge of bi-material with no or weak elastic stress singularity increases after the loading instant and brings about the stress concentration during the transition. In addition, the creep strain distribution of this bi-material after the loading instant is different from that occurred in the transition of an interface edge with strong elastic stress singularity or a crack tip (notch root). The criterion for the increase or decrease of stress intensity near the interface edge proved by the finite element method is proposed in this study. The stress intensity near the interface edge increases when the elastic stress singularity is lower than the creep stress singularity (λ^el < λ^cr) and vice versa.     

Hydrocracking Marlim vacuum residue with natural limonite. Part 2: experimental cracking in a slurry-type continuous reactor

Disposable Australian iron-slurry (AL) and NiO-MoO₃-Al₂O₃ (NiMo) catalysts were used in hydrocracking experiments to convert Marlim vacuum residue (ML-VR) in a slurry-bed continuous flow reactor at temperatures of 440-460 °C, under a hydrogen pressure of 14.7 MPa and an LHSV of 0.5. The degree of conversion ranged from 54 to 83%, depending on the reaction temperature and catalyst used, with AL giving more complete conversion than NiMo. AL also proved more active in the removal of nickel. Hydrogen consumption was linearly correlated with conversion regardless of the catalyst used.     

2.5 Gb/s CPFSK coherent multichannel transmission experiment forhigh capacity trunk line system

A 2.5-Gb/s CPFSK four-channel FDM transmission experiment has been conducted with a 150-km-long nondispersion-shifted fiber. This system employed a wideband channel space controller, a common polarization control, and a channel identification function. These were indispensable for realizing a high-capacity, coherent FDM trunk line system. The results of the experiment confirm the feasibility of trunk line systems with over 160-Gb/s capacity     

Quantum-Mechanical Properties of Protons in Solid Molecular Hydrogen at Megabar Pressures

Quantum distributions of protons in three high-pressure phases of solid molecular hydrogen are investigated by the first-principles path integral molecular dynamics (FP-PIMD) method, in which interatomic forces are calculated precisely based on the density functional theory. The distributions have entirely different symmetries from those predicted by conventional simulation with classical treatment of protons. Especially in phase II, we found that molecular rotation is hindered by quantum fluctuation of protons, having a strong resemblance to a quantum distribution of impurity muonium in crystalline silicon. The mechanism of this “quantum localization” is clarified by a detailed study of the potential energy surface for the molecular rotation.     

1.5 mu m band travelling-wave semiconductor optical amplifiers with window facet structure

1.5 mu m band travelling-wave semiconductor optical amplifiers (TWAs), characterised by their window facet structure and symmetrised active waveguide, have been developed. 1.5 dB spectral gain ripple and 1.3 dB TE-TM mode gain difference at 22 dB signal gain were achieved simultaneously. An average facet reflectivity as low as 0.06% was estimated.<>     

Solution Property and Irradiation Effect of Random Copolypeptides Composed of Ala and Pro Residues

Summary Poly(proline) and random copolypeptide composed of Pro and Ala residues were synthesized, and their solution properties and molecular conformation were investigated. Aqueous solutions of the polypeptide were irradiated with γ-rays above the transition temperature. It was shown that the transition temperature of the aqueous solution of the copolypeptide is influenced by Ala-residue content and γ-ray irradiation.     

250 kHz spectral linewidth operation of 1.5 μm multiple quantumwell DFB-LDs

The spectral linewidth observed in a 1.5 μm multiple-quantum-well distributed-feedback laser diode (MQW-DFB-LD) with 1500 μm cavity length is discussed. The spectral linewidth was drastically reduced in long-cavity MQW-DFB0-LDs through a reduction in threshold carrier density. A spectral linewidth of 250 kHz, the narrowest ever achieved, was obtained     

An undulator with a composite magnetic field

A new type of undulator greatly improved in tunability as compared with a usual undulator, is proposed. The undulator has a composite magnetic field which is a linear superposition of two sinusoidally varying fields with different spatial periods. The wavelength can be changed by varying the field strength of the longer-period component while keeping that of the shorter-period component at the highest possible value. Numerical calculations of the spectral brightness were carried out. The proper ratios between the two spatial periods were found to be 3:1, 5:1 and 7:1.