Influence of ammonium salt on electrowinning of copper from ammoniacal alkaline solutions

In order to develop an energy-saving copper recycling process from wastes, electrochemical measurements were conducted in ammoniacal alkaline solutions containing Cu(I) ions and an ammonium salt of sulfate, chloride or nitrate. The results of each system were then compared. The polarization measurements suggested that the voltage required for the electrode process is lower in the chloride and nitrate systems than that in the sulfate system. The cathode current efficiency during the copper electrodeposition varied from 39 to 97% and increased with current density in the chloride and sulfate systems. In the nitrate system, the lowest cathode current efficiency of 30% was observed because of nitrate ion reduction. Based on these results, the power consumption required for the electrowinning stage of the copper recycling process was calculated. Among these three systems, the chloride system showed the lowest power consumption of 500 kWh t⁻¹ at the current density of 200 A m⁻², which is about 25% of the conventional copper electrowinning process from a copper sulfate-sulfuric acid solution.     

Playful training with augmented reality games: case studies towards reality-oriented system design

In this paper, we propose a reality-oriented augmentation approach to support training activities. The approach aims at adding new value and playful features to traditional training environments with keeping their original look-and-feel. For example, a game monitoring service enables to automatically record game events so that players can review a gaming process and strategy for soul-searching, or replay most impressive scenes to share the experience with others after the game finishes. Even several services are running on background, digital devices and services are seamlessly integrated to the game environment in unobtrusive way so that players can concentrate on training as usual. The concept can be applied to both traditional games (e.g., poker and the game of Go) and non-gaming activities (e.g., calligraphy and drumming). We developed four case studies on the concept: Augmented Reality Go, EmoPoker, Augmented Calligraphy and AR Drum Kit. We discuss design issues in the reality-oriented augmentation process based on user study results.     

Evidence for a Jahn-Teller distortion of Cs2NaHoCl6 at 150 mK observed by X-ray diffractometry

By means of SR X-ray diffractometry, cooperative Jahn-Teller distortion as a structural phase transformation of the first kind is directly confirmed by a splitting of Laue spots. It is understood that the degenerate ground state of a nonmagnetic doublet (₃) of Ho³⁺ in a cubic Ho-elpasolite, Fm3m(O _h ⁵ ), at least above 600 mK, is lifted up by a distortion below 150 mK, which was predicted by a splitting of the NQR spectrum and anomalies in the specific heat and magnetic susceptibility. This structural transformation shows not only the lowest transition temperature up to now, but also the greatest hysteresis specified by a Schottky-type excitation. The magnitude of the relative distortion (1/1) has been roughly estimated to be on the 2.0 · 10^–3 order of magnitude, which is much larger than the predicted value obtained from a point charge approximation. The pecularities of this transition are discussed from the viewpoint that the general theory of a structural transformation, established convincingly at high temperatures could not be easily applied.     

Cu-NMR study on high-T c cuprate La1.89Ca1.11Cu2O6+δ (La2126)

Cu-NMR spectra and the nuclear spin-lattice relaxation rate T ₁ ^-1 have been studied intensively on the bilayer type high-T_c cuprate La_1.89Ca_1.11Cu₂O₆₊ (La2126). The resonance line shift showed a monotonic decrease with lowering temperature in the normal state, indicating that this compound belongs to the lightly-doped region. The Curie-Weiss temperature dependence of (T₁T)^–1 in the normal state shows that the pseudo spin-gap does not always exist in the light-doped bilayer systems.     

Thermal conductivity and phonon scattering mechanisms in La#x2212;x#x2212;x#x2212;xMxCuO4

The thermal conductivity of high density La_2–xM_xCuO₄ (M=Ba, Sr) sintered materials was measured between 15K and 150K for the various concentrations of Ba and the phonon thermal conductivity was analyzed comparing with that of Nd_2–xCe_xCuO₄. The pretty large value for pure La₂CuO₄ was drastically diminished by substituting La by a small amount of Ba atoms especially at low temperatures. It was found that a new type of the phonon scattering center such as a two-level tunneling must be taken account of in order to explain the observed reduction.     

Stick-slip motion control based on cutter location data for an orthogonal-type robot

In this article, a new desktop orthogonal-type robot, which has the capacity of stick-slip motion control based on cutter location data, is presented for lapping small metallic molds with a curved surface. The robot consists of three single-axis devices with a high position resolution of 1 μm. A thin wooden stick tool with a ball-end shape is attached to the tip of the z-axis. In order to improve the lapping performance, a novel stick-slip motion control method is developed in the control system. The small stick-slip motion is orthogonally generated in the direction of the tool’s movement. The effectiveness of stick-slip motion control is examined through an actual lapping test of an LED lens cavity.     

A performance evaluation of disassembly systems with reverse blocking

For sustainable manufacturing, manufacturers should construct and design inverse manufacturing systems consisting of assembly and disassembly systems. The sorting process in the disassembly system is the first process of the whole inverse manufacturing system. Therefore, it can become a bottleneck and decrease the productivity of the whole inverse manufacturing systems.This study focuses on a disassembly system with reverse blocking in a sorting process [Yamada, T., & Matsui, M. (2003). Disassembly production systems and its design issues. Reprints of Japan Industrial Management Association, Spring meeting, Chofu, Japan, May, 144–145 (in Japanese)]. It generalizes the queuing model and discusses the performance of the disassembly system by mathematical and numerical analysis. First, the sorting process with reverse blocking is generally modeled as a queuing system. Next, the stationary state equations of the system are formulated, and the objective function is set as the throughput. Finally, the system performance is discussed by mathematical and numerical analysis in cases of a different number of stations and buffers, and also an example of the system design is shown and discussed in view of the busy rate, blocking probability and throughput.     

First-principles calculation of L10 -disorder phase equilibria for Fe–Ni system

By combining Cluster Variation Method with FLAPW electronic structure total energy calculations and the Debye–Grüneisen theory within quasi-harmonic approximation, L1₀-disorder phase equilibria for Fe–Ni system are calculated. The transition temperature, 483 K, determined in the present calculation is lower than that obtained in the previous calculation without thermal vibration effects. The decrease of the transition temperature is ascribed to the enhanced phase stability of a disordered phase due to the thermal softening of a lattice.     

Ergonomic design and evaluation of the handle for an endoscopic dissector

The purpose of this study was to design an endoscopic dissector handle and objectively assess its usability. The handles were designed with increased contact area between the fingers and thumb and the eye rings, and the eye rings were modified to have a more perpendicular insertion angle to the finger midline. Four different handle models were compared, including a conventional product. Subjects performed dissection, exclusion, grasping, precision manipulation and precision handling tasks. Electromyography and subjective evaluations were measured. Compared to conventional handles, the designated handle reduced the muscle load in the extensor and flexor muscles of the forearm and increased subjective stability. The activity of the first dorsal interosseous muscle was sometimes influenced by the shape of the other parts. The ergonomically designed endoscopic dissector handle used in this study achieved high usability. Medical instrument designs based on ergonomic concepts should be assessed with objective indices.

Practitioner Summary: The endoscopic dissector handles were designed with increased contact area and more suitable insertion angle between the fingers and thumb and the eye rings. Compared to conventional handles, the designated handle reduced the muscle load in the extensor and flexor muscles of the forearm and increased subjective stability.     

Extremely localized interaction in a market model

The model of self-organized criticality (SOC) is a useful tool to understand the complexity of natural systems in the form of the artificial life and the artificial market. However, SOC remains the question what guarantees the criticality even though the natural systems seem to keep itself in the critical state. In this paper, we focus on the locality of interaction in zero-intelligence plus (ZIP) model. The extremely localized interaction changes the behavior of the ZIP model from equilibrium to intermittency. Although the original ZIP model falls into unstable with some noise, extremely localized interaction model archives robust intermittency against the noise parameter. Further, the statistical property of intermittent behavior shows the power-law nature.