A performance evaluation of disassembly systems with reverse blocking

For sustainable manufacturing, manufacturers should construct and design inverse manufacturing systems consisting of assembly and disassembly systems. The sorting process in the disassembly system is the first process of the whole inverse manufacturing system. Therefore, it can become a bottleneck and decrease the productivity of the whole inverse manufacturing systems.This study focuses on a disassembly system with reverse blocking in a sorting process [Yamada, T., & Matsui, M. (2003). Disassembly production systems and its design issues. Reprints of Japan Industrial Management Association, Spring meeting, Chofu, Japan, May, 144–145 (in Japanese)]. It generalizes the queuing model and discusses the performance of the disassembly system by mathematical and numerical analysis. First, the sorting process with reverse blocking is generally modeled as a queuing system. Next, the stationary state equations of the system are formulated, and the objective function is set as the throughput. Finally, the system performance is discussed by mathematical and numerical analysis in cases of a different number of stations and buffers, and also an example of the system design is shown and discussed in view of the busy rate, blocking probability and throughput.     

First-principles calculation of L10 -disorder phase equilibria for Fe–Ni system

By combining Cluster Variation Method with FLAPW electronic structure total energy calculations and the Debye–Grüneisen theory within quasi-harmonic approximation, L1₀-disorder phase equilibria for Fe–Ni system are calculated. The transition temperature, 483 K, determined in the present calculation is lower than that obtained in the previous calculation without thermal vibration effects. The decrease of the transition temperature is ascribed to the enhanced phase stability of a disordered phase due to the thermal softening of a lattice.     

Ergonomic design and evaluation of the handle for an endoscopic dissector

The purpose of this study was to design an endoscopic dissector handle and objectively assess its usability. The handles were designed with increased contact area between the fingers and thumb and the eye rings, and the eye rings were modified to have a more perpendicular insertion angle to the finger midline. Four different handle models were compared, including a conventional product. Subjects performed dissection, exclusion, grasping, precision manipulation and precision handling tasks. Electromyography and subjective evaluations were measured. Compared to conventional handles, the designated handle reduced the muscle load in the extensor and flexor muscles of the forearm and increased subjective stability. The activity of the first dorsal interosseous muscle was sometimes influenced by the shape of the other parts. The ergonomically designed endoscopic dissector handle used in this study achieved high usability. Medical instrument designs based on ergonomic concepts should be assessed with objective indices.

Practitioner Summary: The endoscopic dissector handles were designed with increased contact area and more suitable insertion angle between the fingers and thumb and the eye rings. Compared to conventional handles, the designated handle reduced the muscle load in the extensor and flexor muscles of the forearm and increased subjective stability.     

Extremely localized interaction in a market model

The model of self-organized criticality (SOC) is a useful tool to understand the complexity of natural systems in the form of the artificial life and the artificial market. However, SOC remains the question what guarantees the criticality even though the natural systems seem to keep itself in the critical state. In this paper, we focus on the locality of interaction in zero-intelligence plus (ZIP) model. The extremely localized interaction changes the behavior of the ZIP model from equilibrium to intermittency. Although the original ZIP model falls into unstable with some noise, extremely localized interaction model archives robust intermittency against the noise parameter. Further, the statistical property of intermittent behavior shows the power-law nature.     

Computational origami environment on the web

We present a computing environment for origami on the web. The environment consists of the computational origami engine Eos for origami construction, visualization, and geometrical reasoning, WebEos for providing web interface to the functionalities of Eos, and web service system Scorum for symbolic computing web services. WebEos is developed using Web2.0 technologies, and provides a graphical interactive web interface for origami construction and proving. In Scorum, we are preparing web services for a wide range of symbolic computing systems, and are using these services in our origami environment. We explain the functionalities of this environment, and discuss its architectural and technological features.     

Colorimetric microdetermination of sulphites in foods by use of the modified rankine apparatus. IV.

Summary Detection and determination of traces of sulphites in foods was attempted by use of the modified Rankine apparatus and pararosaniline colorimetry. Replacement of alkaline titration reported previously by pararosaniline colorimetry lowered the absolute detection limit from 30 g (titration method) to 2 g. In view of clean analysis, in the color developing system, 0.1 N-sodium hydroxide was used in place of mercuric chloride solution commonly used as an absorbant of sulphites. In order to prevent oxidative decomposition of sulphites during operation, nitrogen gas was used as carrier instead of air. Dimedone and sodium azide were used for the elimination of aldehydes and nitrites, respecitvely, in the sample, which will disturb the color development of sulphites with pararosaniline-formaldehyde reagents. With this improved method, it was possible to determine the residual sulphites in frozen peeled shrimps, sugared beans and other foods with low sulphite contents accurately.

---

Colorimetrische Mikrobestimmung von Sulfiten in Lebensmitteln bei Anwendung der modifizierten IV. Rankine Apparatur

Zusammenfassung Geringe Sulfitmengen in Lebensmitteln (geschälte Garnelen, gezuckerte Bohnen) können colorimetrisch bestimmt werden. Die neuentwickelte Methode beruht auf einer Kombination von colorimetrischer Bestimmung mittels p-Rosanilin und der Bestimmungsmethode nach Rankine. Auf diese Weise lassen sich Gehalte von 2 g noch genau bestimmen. Bei der Farbentwicklung wurde das giftige Quecksilbertetrachlorid durch 0.1 n-NaOH ersetzt, anstelle von Luft Stickstoff als Trägergas verwendet und somit eine Oxydation des Sulfits während der Bestimmung vermieden. Da Nitrit und Aldehyde die Farbentwicklung stören, wurde ihr Einfluß durch Dimedon und Natriumazid ausgeschaltet.

---

---

Studies on the Analyses of Sulphites in Foods (IV)     

Texture evolution during hot-rolling and recrystallization in B2-type FeAl, NiAl and CoTi intermetallic compounds

The texture evolution during the hot-rolling and the recrystallization of B2-type Fe–48Al, Ni–50Al and Co–50Ti (expressed by at.%) intermetallic compounds were investigated. By hot-rolling at 973 K, Fe–48Al showed a microstructure with coarse grains elongated along rolling direction, while Ni–50Al and Co–50Ti showed a deformed microstructure featured by the heavily distorted (elongated) grains and/or the deformation bands. The hot-rolling texture of Fe–48Al was composed of {111}<uvw>, while those of Ni–50Al and Co–50Ti were composed of {111}<110> and {111}<112>, respectively. After annealing, the recrystallized grains were preferentially nucleated at the grain boundaries for Fe–48Al, and in the heavily distorted regions or the deformation bands for Ni–50Al and Co–50Ti. The orientations of the recrystallized grains were similar with those of the deformed matrix, especially for Ni–50Al and Co–50Ti. The recrystallization textures were generally more dispersive than the hot-rolling texture. Based on these results, the texture evolution during the hot rolling and the recrystallization of the B2-type intermetallic compounds were discussed.     

Study on high performance ice slurry formed by cooling emulsion in ice storage (discussion on adaptability of emulsion to thermal storage material)

This study focuses on an emulsion as a new thermal storage material for ice storage. Two types of emulsions were formed using an oil–water mixture with a small amount of additive. A silicone, light and lump oils were used. The water contents of the emulsions were 70, 80 and 90%. The additive was an amino group modified silicone oil. No depression of freezing point was observed for the emulsions because of their hydrophobic properties. In order to determine the structure of the emulsions, their electrical resistances were measured. Moreover, components of the liquids separating from the emulsions were analyzed. The results indicated that one emulsion was a W/O type emulsion, while the other was an O/W type. Finally, adaptability of the two emulsions to ice storage was discussed, it was concluded that a high performance ice slurry could be formed by the W/O type emulsion.     

Safety aspects of the combined HTTR/steam reforming complex for nuclear hyrogen production

The High-Temperature Engineering Test Reactor (HTTR) in Oarai, Japan, has the potential to demonstrate the production of hydrogen by steam reforming and using nuclear process heat as primary energy input. Particular safety aspects for such a combined nuclear/chemical complex have been investigated such as fire and explosion hazard at presence of flammable gases (LNG, H₂, CO) near the reactor building. A methane vapor cloud in the open atmosphere or partially obstructed areas is highly unlikely to detonate and damage the reactor building. Theoretical assessments and experimental studies significant to the HTTR-steam reforming system, include the spreading and combustion behavior of cryogens and flammable gases providing the basis for a comprehensive safety analysis of the nuclear/chemical facility.     

Effect of gravity on InGaSb crystal growth

The effect of gravity on dissolution of GaSb in InSb melt and growth of InGaSb was experimentally investigated. Experiments were carried out in a GaSb(seed)/InSb/GaSb(feed) sandwich system under an imposed temperature gradient. In the experiments, the GaSb feed crystal dissolved into the InSb melt to supply the required GaSb component for the growth of In_0.1Ga_0.9Sb crystal. Two parameters were considered: (1) the inclination angle (θ) of the sample for gravity as 0° and 53°, and (2) the sample diameter (D) as 9 mm and 5mm. When θ was 0°, the interface was almost flat, indicating that convection was axisymmetric and stable. Whereas the interface was distorted towards gravitational direction when θ was 53°, indicating that solutal convection was dominant. The decrease of growth temperature and sample diameter reduced the distortion of interface and the dissolution amount of GaSb feed. The homogeneous crystals were grown at the initial growth stage by supplying the GaSb component during growth.