Effect of humidity on human comfort and productivity after step changes from warm and humid environment

Subjective experiments were conducted to evaluate the effects of humidity on human comfort and productivity under transient conditions from hot and humid environment to thermally neutral condition. Two climate chambers, “Chamber 1” and “Chamber 2”, adjoined each other were used for this study. Subjects were exposed to 30 °C/70%RH air in Chamber 1 for 15 min with 2.0 met of metabolic rate. Then they moved into Chamber 2, where 4 humidity conditions, 30, 40, 50 and 70%RH were examined. Air temperature was adjusted to keep SET* constant at 25.2 °C for all conditions. Subjects were exposed in Chamber 2 for 180 min performing 2 kinds of simulated office work.

Positive effects of low humidity on subjective pleasantness were found under transient condition at low humidity due to more evaporation from human body, while no significant difference in thermal sensation and humidity sensation among 4 relative humidity levels was obtained. Subjective performance was found to be at the same level under all conditions. However, subjects reported to be more tired at 70%RH after humidity step change.     

Methanol synthesis by the hydrogenation of CO2 over Zn-deposited Cu(111) and Cu(110) surfaces

The hydrogenation of CO₂ over Zn-deposited Cu(111) and Cu(110) surfaces was performed at 523 K and 18 atm using a high pressure flow reactor combined with XPS apparatus. It was shown that the ZnO _x species formed on Cu(111) during reaction directly promoted the methanol synthesis. However, no such promotional effect of the Zn was observed for methanol formation on Cu(110). Thus, Zn on Cu(111) acts as a promoter, while Zn on Cu(110) acts as a poison. The activation energy and the turnover frequency are in fairly good agreement with those obtained for Cu/ZnO powder catalysts.     

Preparation and properties of ethoxylated fatty methyl ester nonionics

Ehthylene oxide (EO) cannot react directly with fatty methyl esters that have no active hydrogen. We developed a new synthetic method, which directly inserts EO into fatty methyl esters (RCOOCH₃) to give [RCO(OCH₂CH₂)_nOCH₃]. This was achieved by the use of a novel solid catalyst modified by metal cations. Ethoxylates of fatty methyl esters obtained by this method were homogeneous monoesters and had good properties as nonionic surfactants. Presented at the AOCS Annual Meeting & Expo in Anaheim, California, April 1993.     

Formation and Properties of Ln-Si-O-N Glasses (Ln = Lanthanides or Y)

Homogeneous Y-Si-O-N glasses containing 15 or 20 eq% nitrogen (N) were prepared from compositions with Y/Si ratios in the vicinity of that of the lowest eutectic point on the Y₂O₃–SiO₂ phase diagram. The liquidus on the phase diagram shifted toward lower temperatures by incorporation of N. The density, the elastic moduli, and the glass transition temperature of the Y-Si-O-N glasses increased with incorporation of N. This is due to the closer packing of atoms in the glasses by the substitution of N, which is in three-fold coordination with Si, for O which is in two-fold coordination, and the stronger covalent nature of the Si–N bond compared with the Si–O bond. The coefficient of thermal expansion of the Y-Si-O-N glasses increased with increasing Y content, because the discontinuity of the glass network developed with increasing nonbridging anions by the introduction of Y. In contrast, the glass transition temperature and the elastic moduli increased with Y content due to the high coordination of Y for O, and the relatively high cationic field strength of Y. Furthermore, the effect of cationic field strength on properties of Ln-Si-O-N glasses (Ln = lanthanides or Y) is discussed.     

Investigation report of geotechnical disaster on river area due to typhoon landfall three times on Okhotsk region,Hokkaido, Japan

For one week from August 17 to 23, 2016, three consecutive typhoons made landfall in Hokkaido for the first time on record. These typhoons and the front they stimulated brought record-breaking torrential rain over the eastern part of Hokkaido. To investigate the damage to grounds and rivers resulting from this rainfall, the Japan Society of Civil Engineers (JSCE) and the Japanese Geotechnical Society (JGS) formed a disaster research group to conduct an investigation. This report provides the results of the investigation into damage to the grounds of areas along the Tokoro River of the Okhotsk region, Hokkaido, that suffered from this tremendous and diverse disaster. Specifically, the report describes the situation of the levees which were broken and eroded by the overflowing water, the shape of the levee bodies, the levee body soil properties examined by observation of the sections, as well as the occurrence of sand boiling and air blows. The washout of road embankments as well as damage to road bridge mounting fills and abutment backfills were also investigated. The investigation has demonstrated the need to clarify the resistance of the abutment backfills and levee bodies to flowing water as well as the geotechnical predominant factors in order to clarify the mechanisms behind erosion and washout, the need to review new measures that allow for the scale of sand boiling and resultant changes in levee body stability, and the fact that the existing embankments were able to temporarily suppress the flooding water which had spilled over from the river. Furthermore, although it has been identified that the findings of a study on an embankment washout associated with a tsunami can be applied to measures taken against the overflowing water, it has also been found necessary to clarify the predominant geotechnical factors using model tests and to use a more sophisticated analytical approach to establish a geotechnical stability review as soon as possible in order to prevent the levees and embankments from being eroded and washed out due to overflowing water.     

Microstructure control and high temperature properties of TiAl base alloys

An equiaxed fine grain structure, a γ grain structure with the precipitated ₂ laths, and a fully lamellar structure were obtained by the microstructure control using thermomechanical processing and heat treatment. The key to obtaining the equiaxed fine grain structure using isothermal forging is to decompose the lamellar structure and then produce the fine grain microstructure through dynamic recrystallization. TiAl base alloys consisting of fine equiaxed grains, in particular, Ti-39Al-9V consisting of the γ and B2 phases exhibited superplastic elongation of more than 600% at 1423 K. Creep rupture properties of TiAl binary alloys with various microstructures were studied in purified He in the temperature range from 1073 to 1373 K. Above 1173 K the precipitated ₂ phase improved the steady state creep rate and creep life. At 1023 K, the ₂ phase did not improve the creep rate, although the steady state creep rate decreased and the creep life increased as the γ grain size increased.     

考虑脉动风影响的斜拉索在支点激励下的非线性振动

应用柔性拉索的非线性振动响应计算理论,提出考虑横向脉动风荷载作用及支点激励的拉索非线性振动计算方法。以力学特性不同的两种斜拉索为对象,通过数值方法分析横风作用和支点激励下的钢索、CFRP拉索非线性振动响应,比较支点激励频率、风速、阻尼器对参数振动响应的影响。结果表明,在拉索基频f1以及两倍基频2f1的支点位移激励下,脉动风虽然导致拉索出现不规则的竖向和横向水平振动轨迹,但不会改变拉索的参数振动特性;横向风荷载对参数振动具有空气阻尼力的效应;总体上CFRP拉索的参数振动振幅小于钢索,特别当拉索跨度比较大时,CFRP拉索的振幅将明显低于同跨度的钢索;黏性阻尼装置的减振效果与拉索的结构条件有关,当拉索的无量纲参数λ(Irvine参数)较大时,阻尼器的减振效果不明显,反之当λ较小时阻尼器有一定的减振效果。     

Hydrogen absorption characteristics of Pd1−xLix (x = 0.055 and 0.072) alloys and ordered Pd7Li

Thermodynamic quantities were determined for the absorption of hydrogen in Pd-5.5at.%Li and Pd-7.2at.%Li alloys, the latter alloy being in the two-phase field of saturated -Pd(Li,s) solid solution and the ordered Pd₇Li phase. Data were also determined for the Pd-10.6at.%Li alloy which consists only of the ordered Pd₇Li phase. The data were determined from measurements of pressure-composition isotherms at temperatures between 273 K and 463 K and hydrogen pressures up to 1000 Torr. The Pd---Li alloys dissolve considerable amounts of hydrogen and form a more stable hydride phase than Pd despite the lattice contraction which occurs on alloying Pd with Li. The hydrogen solubility in the ordered Pd₇Li phase alone is a little smaller than that in the two-phase mixture. The large hydrogen absorption of Pd---Li alloys, which does not depend on the presence of ordered Pd₇Li, may be attributed to (i) an attractive H---Li pair interaction, (ii) a decrease in the strain energies necessary for hydrogen occupation of the interstices, because of the similar lattice parameters of the -Pd(Li,s) and ordered Pd₇Li phases, and the large compressibility of Pd---Li alloys, and (iii) the valence of 1 of Li in Pd compared with 3 for, for example, Y in Pd.     

Disinfection of Legionella pneumophila by ultrasonic treatment with TiO2

An ultrasonic treatment system, using a TiO₂ photocatalyst, was used to disinfect Legionella pneumophila. A kinetic study of the process indicates that TiO₂ significantly improves the disinfection process. The concentrations of viable cells were reduced to 6% of the initial concentrations in the presence of 0.2 g/ml TiO₂ after a 30 min of treatment period, while only an 18% reduction was observed in the absence of TiO₂. The potency of the disinfection could be enhanced, to some extent, by increasing the amount of TiO₂ used. Cell concentrations were decreased by an order of 3 within 30 min of treatment in the presence of 1.0 g/ml TiO₂. The disinfection power in the presence of TiO₂ versus Al₂O₃ was also compared and the findings showed that TiO₂ induced a higher cell killing. No significant effect of initial cell concentration on the disinfection was found in the range of 10²-10⁷ CFU/ml after a 30 min of treatment period. The mechanism of cell killing was investigated by examining the effects of OH radical scavengers such as ascorbic acid, histidine and glutathione. The disinfection power was reduced in samples that contained these radical scavengers, thus indicating the importance of OH radicals.     

High-precision temperature control and stabilization using a cryocooler

We describe a method for precisely controlling temperature using a Gifford-McMahon (GM) cryocooler that involves inserting fiber-reinforced-plastic dampers into a conventional cryosystem. Temperature fluctuations in a GM cryocooler without a large heat bath or a stainless-steel damper at 4.2 K are typically of the order of 200 mK. It is particularly difficult to control the temperature of a GM cryocooler at low temperatures. The fiber-reinforced-plastic dampers enabled us to dramatically reduce temperature fluctuations at low temperatures. A standard deviation of the temperature fluctuations of 0.21 mK could be achieved when the temperature was controlled at 4.200?0 K using a feedback temperature control system with two heaters. Adding the dampers increased the minimum achievable temperature from 3.2 to 3.3 K. Precise temperature control between 4.200?0 and 300.000 K was attained using the GM cryocooler, and the standard deviation of the temperature fluctuations was less than 1.2 mK even at 300 K. This technique makes it possible to control and stabilize the temperature using a GM cryocooler.