Improvement in high temperature stability of Pd coating on Nb by Nb2C intermediate layer

Niobium subcarbide (Nb₂C) was chosen as a material for non-porous intermediate layer to improve the high temperature durability of Pd–Nb composite membranes for hydrogen separation. A layer of Nb₂C was prepared between Nb substrate and thin Pd films (100 nm), and the stability of Pd coating at elevated temperatures (573–773 K) was examined by hydrogen absorption experiments. Hydrogen permeability through the Nb₂C layer appeared to be sufficiently high, and no noticeable deterioration was observed in hydrogen absorption rate under as-prepared conditions. The degradation in coating effect of Pd at elevated temperatures was substantially mitigated by Nb₂C layer. Such improved durability was ascribed to retardation of open porosity development by Nb₂C caused as a consequence of impeded interdiffusion between Pd and Nb.     

Structural Change of Maize Starch Granules by Ball-mill Treatment

Effect of ball-mill treatment on physical properties and molecular change of maize starch granule was investigated. Ball-mill treatment was done by rotary type mill, and species of maize starch are normal, waxy and high amylose (amylo). Running time of the treatment is 0–320 h. Starch granules loss smoothness on surface and became rough, even though their changing speed was different among the three species. But, they retained whole figure and size after 320 h treatment in the all cases. Amylase susceptivity and water absorption activity were measured. Structural change of starch components was compared among the three species with X-ray diffraction, DSC and GPC. High Performance An-ion Exchange Chromatography (HPAEC) pattern of debranched sample treated with ball-mill for 320 h showed that formation of very short chain in amylopectin is little. ¹³C solid-NMR spectra suggest that disruption of molecules of amylopectin and amylose with ball-mill might occur at their glycosidic linkage. However, very slight radical was observed by Electron Spin Resonance spectroscopy (ESR) in the case of 320 h sample.     

Bulk heterojunction organic solar cells utilizing 1,4,8,11,15,18,22,25-octahexylphthalocyanine

Bulk heterojunction solar cells utilizing soluble phthalocyanine derivative, 1,4,8,11,15,18,22,25-octahexylphthalocyanine (C6PcH₂) have been investigated. The active layer was fabricated by spin-coating the mixed solution of C6PcH₂ and 1-(3-methoxy-carbonyl)-propyl-1-1-phenyl-(6,6)C61 (PCBM). The photovoltaic properties of the solar cell with bulk heterojunction of C6PcH₂ and PCBM demonstrated the strong dependence of active layer thickness, and the optimized active layer thickness was clarified to be 120 nm. By inserting MoO₃ hole transport buffer layer between the positive electrode and active layer, the FF and energy conversion efficiency were improved to be 0.50 and 3.2%, respectively. The tandem organic thin-film solar cell has also been studied by utilizing active layer materials of C6PcH₂ and poly(3-hexylthiophene) and the interlayer of LiF/Al/MoO₃ structure, and a high V_oc of 1.27 V has been achieved.     

Facile ion-exchanged synthesis of Sn incorporated potassium titanate nanoribbons and their visible-light-responded photocatalytic activity

Sn²⁺-incorporated potassium titanate (K₂Ti₆O₁₃) nanoribbons were prepared by a facile acid-free ion-exchanged method in a dehydrated methanol solution at room temperature. XRD patterns suggested that K₂Ti₆O₁₃ (KTO) and Sn²⁺-incorporated KTO (SKTO) are well crystallized with monoclinic phase structures. The mole ratio of incorporated Sn²⁺ to K⁺ in SKTO was estimated to be 2. X-ray photoelectron spectrum showed that the Sn species of SKTO consisted of 90% of Sn²⁺ and 10% of Sn⁴⁺, suggesting that part of Sn²⁺ was oxidized to Sn⁴⁺ in the incorporation process. The band gap of SKTO was 0.7 eV narrower than that of KTO, which was derived from lift of the top of the valence band due to the hybridization of Sn5s and O2p orbitals. The SKTO nanoribbons showed remarkable photocatalytic activities for H₂ evolution and rhodamine B degradation under visible light irradiation (λ ≥ 420 nm). The photocatalytic mechanism and durability were studied in detail. The advantage of this acid-free ion-exchange method is ease of ion-exchange of K⁺ with H⁺ and maintenance of the integrity of the 1D nanoribbon structures. This method can be applied to preparation of other Sn²⁺-incorporated compounds with special nanostructures.     

Fin efficiency of serrated fins. Part 4. Correction factor for inline arrangement

A correction factor to the theoretical fin efficiency of serrated fins, reported in Part 1 and Part 2 of this report, was derived for an inline arrangement experimentally. The experiment was performed using an open‐type wind tunnel with six kinds of test finned‐tubes made of copper, carbon steel and stainless steel, which were arranged in one to five rows. Heat transfer measurement was done by the local thermal simulation method. The derived correction factor for the 1st row was the same as for staggered arrangement reported in Part 3, for the 2nd and deeper rows, however, a further correction was needed, which may be caused by the difference in the nonuniformity in heat transfer coefficient over the fin surface. © 2004 Wiley Periodicals, Inc. Heat Trans Asian Res, 33(4): 258–269, 2004; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20008     

Application of microbial genes to recalcitrant biomass utilization and environmental conservation

Recent papers concerning the application of microbial genes to recalcitrant biomass utilization and environmental conservation are reviewed. Microbial genes have been integrated and expressed in plants and microorganisms. When cellulose-degrading enzyme genes are expressed in rice plants, the transgenic plants exhibit swollen cell walls which increases the digestibility of rice straw in the rumen. When genes encoding aromatic compound-degrading enzymes are expressed in plants, it is expected that aromatic compounds contaminating soil would be degraded during the growth of the transgenic plants. The former transgenic plants are utilized as feed and the latter for phytoremediation. Dockerin and cohesin interactions occurring in the cellulase complex, cellulosome, are applied to the construction of artificial enzyme complexes and protein purification by expressing the genes in transformed bacteria and/or silkworms, respectively. In the case of the forced expression of bacterial genes encoding chitinase and/or hydrogenase in the wild-type bacteria, chitin degradation and hydrogen gas production in the transformed bacteria occur at much higher rates than in the wild type.     

Tachykinins and tachykinin receptors in bone

Adrenomedullin (AM) was originally characterized in extracts of an adrenal medullary tumor. Since this original finding the peptide and its mRNA have also been found in the adrenal cortex, specifically, in the cells of the aldosterone-secreting zona glomerulosa. It is clear that the synthesis of AM is actively regulated in both cortex and medulla. Much research effort has been focused on identifying a role for AM in the adrenal gland. To date, no consistent effect on medullary catecholamine biosynthesis has been demonstrated. In the cortex the actions of AM are controversial and appear to depend on both the tissue preparation used and on the specific receptor population expressed in the individual gland. The results of further studies on the long-term actions of AM on adrenal growth and differentiation are awaited with interest.     

All solid-state battery with sulfur electrode and thio-LISICON electrolyte

A high-capacity type of all solid-state battery was developed using sulfur electrode and the thio-LISICON electrolyte. New nano-composite of sulfur and acetylene black (AB) with an average particle size of 1–10 nm was fabricated by gas-phase mixing and showed a reversible capacity of 900 mAh g⁻¹ at a current density of 0.013 mA cm⁻².     

Quantum Effects on Hydrogen Isotopes Adsorption in Nanopores

We have investigated the applicability of simulations and theoretical techniques for exploring the selectivities of hydrogen isotopes. We have simulated the adsorption isotherms of H₂ in an idealized carbon slit pore at 77 K by using the grand canonical Monte Carlo simulations with the Feynman-Hibbs effective potential (FH-GCMC) and the rigorous path integral method (PI-GCMC), and we obtained good agreement between the isotherms from both simulations. This suggests that FH-GCMC, which uses the approximative Feynman-Hibbs treatment, is as useful as PI-GCMC for exploring H₂ adsorption at 77 K. Moreover, we show that the ideal adsorption solution theory (IAST) can predict the selectivity of D₂ over H₂ in the interstices of single-wall carbon nanotube (SWNT) bundles at 77 K (below 0.1 MPa) very well by comparing the obtained results with the mixture adsorption FH-GCMC simulations. This indicates that IAST is also applicable to the estimation of the selectivity of D₂ over H₂ at moderate pressures and at 77 K from experimental single-component adsorption isotherms. We also demonstrate that the FH-GCMC simulation can reproduce the experimental adsorption isotherms of H₂ and D₂ in aluminophosphate AlPO₄-5 at 77 K. Finally, we analyze the selectivity of D₂ over H₂ by IAST with the experimental single-component adsorption isotherms of H₂ and D₂ at 77 K for a variety of adsorbents: AlPO₄-5, activated carbon fibers (ACFs), HiPco SWNT, and SWNHs. The selectivities predicted by the experimental adsorption data based on the results from the FH-GCMC simulations are presented and discussed.