Single stage and double absorption heat transformers used to recover energy in a distillation column of butane and pentane

This paper presents the theoretical analysis of the use of single stage and double absorption heat transformers operating with the water–lithium bromide mixture coupled to a butane and pentane distillation column in a Mexican refinery. A mathematical model of the heat transformers was developed in FORTRAN and integrated as a user model to the Aspen Plus simulation code. Both components coupled to the column were modelled on steady-state conditions. The results show that it is theoretically possible to reduce the energy consumed in the reboiler between 26 and 43% by the use of single stage heat transformer at specific conditions, and between 28 and 33% with double absorption heat transformers for a wide range of operating conditions. Copyright © 2003 John Wiley & Sons, Ltd.     

Four-wire current-regulated PWM voltage converter

Shunt active power filters are connected in parallel with the electricity supply network. If the AC mains has a neutral conductor, it is desirable to compensate the mains harmonic currents zero-sequence components. This can be achieved with a four-wire pulsewidth modulation voltage converter connected to the AC mains. In this case, the three-phase and the neutral AC currents must be controlled. A generalization of the space-vector-based current controller in the αβo coordinate system is presented in this paper. With this current controller, all the current harmonic systems of positive, negative, and zero sequence can be injected by the converter and, thus, compensated on the AC mains. The system is also useful to compensate unbalanced currents of fundamental frequency. A useful benefit of this system is that it is possible to control the converter four-wire currents with equal hysteresis errors. Simulation and experimental results are presented     

Effects of intrathecal administration of adrenergic agonists on the frequency of copulatory pelvic thrusting of the male rat

The effects of the intrathecal perispinal administration of adrenergic agonists on the characteristics of frequency, duration, and vigor of pelvic thrusting displayed by male rats during copulation was assessed by an accelerometric technique. A different dose of one drug (noradrenaline, clonidine or isoproterenol) and saline as control was administered at the lumbosacral level of the spinal cord to sexually active male rats in tests of sexual behavior performed at weekly intervals. The intrathecal administration of noradrenaline (alpha-adrenoceptor agonist) increased the frequency of pelvic thrusting in mount and intromission responses, whereas both the alpha 2-adrenoceptor agonist clonidine (25 micrograms) and the beta-adrenoceptor agonist isoproterenol (40 micrograms) reduced the frequency of pelvic thrusting in these responses as compared to values obtained under the intrathecal administration of saline. On the other hand, the duration of the thrusting trains and the potency or vigor of pelvic thrusting in mounts and intromissions did not differ from values obtained under saline treatment. These findings indicate a possible participation of noradrenaline in the modulation of the spinal mechanisms involved in the generation of rhythmic pelvic thrusting performed by the male rat during copulation.     

Finite element analysis of buckle propagation in pipelines under tension

Using a novel finite element technique, results are obtained regarding the effects of tension on buckle propagation in pipelines. The unique feature of the technique, which is otherwise built within the framework of large-deformation, elastoplastic finite element analysis, is that the steady-state nature of buckle propagation is exploited in the formulation. Parametric studies can be conducted easily, since the computational requirements of the procedure are low compared with those of conventional finite element analysis. In this paper, the technique and its implementation are reviewed briefly. In order to demonstrate the predictive capability of the technique, results for aluminum Al-6061-T6 are compared with experimental data for a wide range of values of the diameter-to-thickness ratio. Calculations are then carried out in order to examine the effects of tension on buckle propagation.     

Face recognition with lattice independent component analysis and extreme learning machines

We focus on two aspects of the face recognition, feature extraction and classification. We propose a two component system, introducing Lattice Independent Component Analysis (LICA) for feature extraction and Extreme Learning Machines (ELM) for classification. In previous works we have proposed LICA for a variety of image processing tasks. The first step of LICA is to identify strong lattice independent components from the data. In the second step, the set of strong lattice independent vector are used for linear unmixing of the data, obtaining a vector of abundance coefficients. The resulting abundance values are used as features for classification, specifically for face recognition. Extreme Learning Machines are accurate and fast-learning innovative classification methods based on the random generation of the input-to-hidden-units weights followed by the resolution of the linear equations to obtain the hidden-to-output weights. The LICA-ELM system has been tested against state-of-the-art feature extraction methods and classifiers, outperforming them when performing cross-validation on four large unbalanced face databases.     

GCase and LIMP2 Abnormalities in the Liver of Niemann Pick Type C Mice

The lysosomal storage disease Niemann–Pick type C (NPC) is caused by impaired cholesterol efflux from lysosomes, which is accompanied by secondary lysosomal accumulation of sphingomyelin and glucosylceramide (GlcCer). Similar to Gaucher disease (GD), patients deficient in glucocerebrosidase (GCase) degrading GlcCer, NPC patients show an elevated glucosylsphingosine and glucosylated cholesterol. In livers of mice lacking the lysosomal cholesterol efflux transporter NPC1, we investigated the expression of established biomarkers of lipid-laden macrophages of GD patients, their GCase status, and content on the cytosol facing glucosylceramidase GBA2 and lysosomal integral membrane protein type B (LIMP2), a transporter of newly formed GCase to lysosomes. Livers of 80-week-old Npc1^−/− mice showed a partially reduced GCase protein and enzymatic activity. In contrast, GBA2 levels tended to be reciprocally increased with the GCase deficiency. In Npc1^−/− liver, increased expression of lysosomal enzymes (cathepsin D, acid ceramidase) was observed as well as increased markers of lipid-stressed macrophages (GPNMB and galectin-3). Immunohistochemistry showed that the latter markers are expressed by lipid laden Kupffer cells. Earlier reported increase of LIMP2 in Npc1^−/− liver was confirmed. Unexpectedly, immunohistochemistry showed that LIMP2 is particularly overexpressed in the hepatocytes of the Npc1^−/− liver. LIMP2 in these hepatocytes seems not to only localize to (endo)lysosomes. The recent recognition that LIMP2 harbors a cholesterol channel prompts the speculation that LIMP2 in Npc1^−/− hepatocytes might mediate export of cholesterol into the bile and thus protects the hepatocytes.     

Oxygen transport in ferrite-based ceramic membranes: Effects of alumina sintering aid

Moderate additions of Al₂O₃ to strontium ferrite-based mixed conductors, such as SrFe_0.7Al_0.3O_3−δ and La_0.2Sr_0.8Fe_0.8Ga_0.2O_3−δ with the composition close to the solid solution formation limits, make it possible to improve ceramics sinterability, to increase oxygen permeability and to decrease thermal expansion. These effects are associated with the segregation of alumina-rich phases, primarily SrAl₂O₄, and the formation of A-site cation-deficient perovskite. The improved properties of the SrFe_0.7Al_0.3O₃-based material were used to fabricate high-quality tubular membranes for methane conversion reactors. Similar enhancement in sinterability is also observed for another promising parent material of mixed-conducting membranes, La_0.5Sr_0.5FeO_3−δ. However, extensive dissolution of Al³⁺ cations in the iron sublattice, creation of A-site vacancies and changing the La:Sr concentration ratio all lead to decreasing ionic transport in La_0.5Sr_0.5FeO_3−δ. As a result, additions of either Al₂O₃ or SrAl₂O₄ have a deteriorating influence on the oxygen permeation fluxes through La_0.5Sr_0.5FeO₃-based ceramics.     

A 2D algorithm with asymmetric workload for the UPC conjugate gradient method

This paper examines four different strategies, each one with its own data distribution, for implementing the parallel conjugate gradient (CG) method and how they impact communication and overall performance. Firstly, typical 1D and 2D distributions of the matrix involved in CG computations are considered. Then, a new 2D version of the CG method with asymmetric workload, based on leaving some threads idle during part of the computation to reduce communication, is proposed. The four strategies are independent of sparse storage schemes and are implemented using Unified Parallel C (UPC), a Partitioned Global Address Space (PGAS) language. The strategies are evaluated on two different platforms through a set of matrices that exhibit distinct sparse patterns, demonstrating that our asymmetric proposal outperforms the others except for one matrix on one platform.     

The influence of the preparing conditions of SiO2 supported Cp2ZrCl2 catalyst on ethylene polymerization

In this work, ethylene was polymerized by using Cp₂ZrCl₂ supported on silica pretreated with methylaluminoxane (MAO) as the catalyst system. The influence of the conditions for the preparation of the heterogeneous catalyst, such as temperature, washing method of the catalytic solid, MAO and metallocene concentration in the support treatment, time of MAO, and metallocene immobilization on the support, type of alkylaluminum used in the support pretreatment, and calcination temperature of the support were investigated. Aluminum and zirconium content fixed on the silica surface were determined by inductively coupled plasma emission spectroscopy. Polymer characteristics were determined by gel permeation chromatography and differential scanning calorimetry. According to the results, the activity of some supported catalysts were far higher than with the homogeneous system. Moreover, polyethylene with very high molecular weights were also obtained and with molecular weight distribution larger than those produced with the homogeneous precursor. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2054–2061, 2002