Convective drying of wastewater sludges and sawdust/sludge mixtures was studied. The first part of this work was an experimental study performed in a cross-flow convective dryer using 500 g of wet material extruded through a disk with circular dies of 12 mm. The results showed that the sawdust addition has a positive impact on the drying process from a mass ratio of 2/8, on a dry basis, with observed drying rates higher than the original sludge. The second part of this work consisted of developing a drying model in order to identify the internal diffusion coefficient and convective mass transfer coefficient from the experimental data. A comparison was made between fitted drying curves, well represented by the Newton's model, and the analytical solutions of the diffusion equation applied to a finite cylinder. Variations of dimensional characteristics, such as the volume and exchange surface of the sample bed, were obtained by X-ray tomography. This technique allowed us to confirm that shrinkage, which is an important phenomenon occurring during sludge and sawdust/sludge mixture drying, must be taken into account. The results showed that both the internal diffusion coefficient and convective mass transfer coefficient were affected by mixing and sawdust addition. The internal diffusion coefficient changed from 7.77 × 10?9 m2/s for the original sludge to 7.01 × 10?9 m2/s for the mixed sludge and then increased to 8.35 × 10?9 m2/s for the mixture of a mass ratio of 4/6. The convective mass transfer coefficient changed from 9.70 × 10?8 m/s for the original sludge to 8.67 × 10?8 m/s for the mixed sludge and then increased to 12.09 × 10?8 m/s for the mixture of a mass ratio of 4/6. These results confirmed that sawdust addition was beneficial to the sludge drying process as the mass transfer efficiency between the air and material increased. Reinforcing the texture of sludge by adding sawdust can increase the drying rate and decrease the drying time, and then the heat energy supply will be reduced significantly. The study also showed that neglecting shrinkage phenomenon resulted in an overestimation for the internal diffusion coefficient for the convective drying of sludges and sawdust/sludge mixtures. 相似文献
Using drugs to treat COVID-19 symptoms may induce adverse effects and modify patient outcomes. These adverse events may be further aggravated in obese patients, who often present different illnesses such as metabolic-associated fatty liver disease. In Rennes University Hospital, several drug such as hydroxychloroquine (HCQ) have been used in the clinical trial HARMONICOV to treat COVID-19 patients, including obese patients. The aim of this study is to determine whether HCQ metabolism and hepatotoxicity are worsened in obese patients using an in vivo/in vitro approach. Liquid chromatography high resolution mass spectrometry in combination with untargeted screening and molecular networking were employed to study drug metabolism in vivo (patient’s plasma) and in vitro (HepaRG cells and RPTEC cells). In addition, HepaRG cells model were used to reproduce pathophysiological features of obese patient metabolism, i.e., in the condition of hepatic steatosis. The metabolic signature of HCQ was modified in HepaRG cells cultured under a steatosis condition and a new metabolite was detected (carboxychloroquine). The RPTEC model was found to produce only one metabolite. A higher cytotoxicity of HCQ was observed in HepaRG cells exposed to exogenous fatty acids, while neutral lipid accumulation (steatosis) was further enhanced in these cells. These in vitro data were compared with the biological parameters of 17 COVID-19 patients treated with HCQ included in the HARMONICOV cohort. Overall, our data suggest that steatosis may be a risk factor for altered drug metabolism and possibly toxicity of HCQ. 相似文献
Fusarium graminearum, the main causal agent of Fusarium Head Blight (FHB), is one of the most damaging pathogens in wheat. Because of the complex organization of wheat resistance to FHB, this pathosystem represents a relevant model to elucidate the molecular mechanisms underlying plant susceptibility and to identify their main drivers, the pathogen’s effectors. Although the F. graminearum catalog of effectors has been well characterized at the genome scale, in planta studies are needed to confirm their effective accumulation in host tissues and to identify their role during the infection process. Taking advantage of the genetic variability from both species, a RNAseq-based profiling of gene expression was performed during an infection time course using an aggressive F. graminearum strain facing five wheat cultivars of contrasting susceptibility as well as using three strains of contrasting aggressiveness infecting a single susceptible host. Genes coding for secreted proteins and exhibiting significant expression changes along infection progress were selected to identify the effector gene candidates. During its interaction with the five wheat cultivars, 476 effector genes were expressed by the aggressive strain, among which 91% were found in all the infected hosts. Considering three different strains infecting a single susceptible host, 761 effector genes were identified, among which 90% were systematically expressed in the three strains. We revealed a robust F. graminearum core effectome of 357 genes expressed in all the hosts and by all the strains that exhibited conserved expression patterns over time. Several wheat compartments were predicted to be targeted by these putative effectors including apoplast, nucleus, chloroplast and mitochondria. Taken together, our results shed light on a highly conserved parasite strategy. They led to the identification of reliable key fungal genes putatively involved in wheat susceptibility to F. graminearum, and provided valuable information about their putative targets. 相似文献
Geopolymer-based glass-ceramic matrix composites can be processed at room temperature and a heat treatment below 100°C leads to matrix hardening thanks to the geopolymerization mechanisms. The stabilization of the matrix into glass-ceramics is achieved via a post-curing at high temperature. This paves the way of the utilization of cost-effective liquid composite molding processes, for which all the necessary equipment is already available for processing temperature ranges related to polymer matrix composites, provided that the rheological behavior of the precursor is suitable to conveniently permeate the fibrous preform. The paper describes the thixotropic rheological behavior of a reference suspension at processing temperature (10°C-20°C) and its evolution along aging at −18°C. The changes are interpreted in terms of geopolymerization mechanisms (dissolution and polycondensation) and suspension rheology (predominance of hydrodynamic effects at high shear rate). On this basis, a phenomenological modeling framework, combining two Krieger-Dougherty equations, is proposed to build a relationship between the effective viscosity of the suspension and the phenomena involved during aging (dissolution of aluminosilicate particles) and shearing (microstructure scalar variable). 相似文献
A novel biobased plasticizer made of cardanol is designed for poly(lactide) (PLA). This cardanol‐derived plasticizer, i.e., methoxylated hydroxyethyl cardanol (MeCard), is synthesized through methoxylation of the double bonds on the side chain of cardanol, and characterized by 1H NMR and mass spectrometry. The plasticization effect of MeCard on the molecular structure, morphology, thermal and mechanical properties of PLA is evaluated and compared to that of a commercial cardanol, i.e., hydroxyethyl cardanol (pCard). The plasticization efficiency of MeCard is demonstrated by a substantial decrease of the glass transition temperature and storage modulus together with a significant increase of the elongation at break as compared to neat PLA. Moreover, MeCard exhibits higher plasticization performance than pCard toward PLA. Such behavior is related to a higher miscibility and compatibility between PLA and MeCard thanks to the methoxylation of the double bonds on the side chain of cardanol as shown by SEM micrographs.
Inflammation and oxidative stress are thought to be involved in, or associated with, the development of obesity, dyslipidemia, hepatic steatosis, and insulin resistance. This work was designed to determine the evolution of inflammation and oxidative stress during onset and progression of hepatic steatosis and glucose intolerance. Seventy-five male Wistar rats were divided to control and high-fat high-fructose (HFHFr) groups. A subgroup of each group was sacrificed at 4, 8, 12, 16, and 20 weeks. HFHFr-fed rats exhibited overweight, glucose intolerance, and hepatic steatosis with increased contents of hepatic diacylglycerols and ceramides. The HFHFr diet increased hepatic interleukin 6 (IL-6) protein and adipose tissue CCL5 gene expression and hepatic nicotinamide adenine dinucleotide phosphate (NADPH) oxidase activity but not mitochondrial reactive oxygen species (ROS) production. The HFHFr diet decreased plasma and liver levels of isoprostanoid metabolites as well as plasma thiobarbituric acid-reactive substance (TBARS) levels. Hepatic glutathione content was decreased with a moderate decrease in superoxide dismutase (SOD) and glutathione peroxidase (GPx) with the HFHFr diet. Overall, HFHFr diet led to hepatic lipid accumulation and glucose intolerance, which were accompanied by only moderate inflammation and oxidative stress. Most of these changes occurred at the same time and as early as 8 or 12 weeks of diet treatment. This implies that oxidative stress may be the result, not the cause, of these metabolic alterations, and suggests that marked hepatic oxidative stress should probably occur at the end of the steatotic stage to result in frank insulin resistance and steatohepatitis. These findings need to be further evaluated in other animal species as well as in human studies. 相似文献
This paper presents a generalization to eddy current images of a thresholding method developed for ultrasonic imaging. It is also shown how to improve the thresholding strength through the definition of a cooperation rule between two threshold assessment measures. This rule is also used to reduce time of calculus. These measures are calculated from the image cooccurrence matrix. The aim is to build a thresholding method that gives a threshold value but also an indicator which allows the operator to know if the methodology applies to the processed image. Examples of results are presented. 相似文献
We describe a new cloning-free strategy to delete genes in the opportunistic pathogenic yeast Candida lusitaniae. We first constructed two ura3 Δ strains in C. lusitaniae for their use in transformation experiments. One was deleted for the entire URA3 coding sequence; the other possessed a partial deletion within the coding region, which was used to determine the minimum amount of homology required for efficient homologous recombination by double crossing-over of a linear DNA fragment restoring URA3 expression. This amount was estimated to 200 bp on each side of the DNA fragment. These data constituted the basis of the development of a strategy to construct DNA cassettes for gene deletion by a cloning-free overlapping PCR method. Two cassettes were necessary in two successive transformation steps for the complete removal of a gene of interest. As an example, we report here the deletion of the LEU2 gene. The first cassette was constituted by the URA3 gene flanked by two large fragments (500 bp) homologous to the 5' and 3' non-coding regions of LEU2. After transformation of an ura3 Δ recipient strain and integration of the cassette at the LEU2 locus, the URA3 gene was removed by a second transformation round with a DNA cassette made by the fusion between the 5' and 3' non-coding regions of the LEU2 gene. The overall procedure takes less than 2 weeks and allows the creation of a clean null mutant that retains no foreign DNA sequence integrated in its genome. 相似文献
The relationship between smoking parameters and odour characteristics, evaluated by a trained sensory panel, were studied on smoked herring. In addition, a possible correlation between the content of 10 phenolic compounds and sensory perceptions was investigated. Five smoking techniques were applied, combining smoke production conditions, performed by pyrolysis of beech wood sawdust or by friction of beech wood log, with smoke deposition, either in a controlled kiln (traditional smoking) or by an electrostatic process. In the fifth smoking technique, a purified condensate of beech smokes was vaporised on fish fillets in the smokehouse. The time of smoking was 3 h for traditional smoking and the liquid smoke atomisation process and 12 min for the electrostatic method. The effects of three smoking temperatures (16, 24, 32 °C) were tested for both the traditional and the liquid smoke atomisation processes, as well as the effect of the position of the exhaust valve in the smokehouse in the case of the traditional method. Two different voltages were applied for the electrostatic process, 37 and 42 kV. 相似文献