Adapting an ultrasonic image threshold method to eddy current images and defining a validation domain of the thresholding method

This paper presents a generalization to eddy current images of a thresholding method developed for ultrasonic imaging. It is also shown how to improve the thresholding strength through the definition of a cooperation rule between two threshold assessment measures. This rule is also used to reduce time of calculus. These measures are calculated from the image cooccurrence matrix. The aim is to build a thresholding method that gives a threshold value but also an indicator which allows the operator to know if the methodology applies to the processed image. Examples of results are presented.     

A two-step cloning-free PCR-based method for the deletion of genes in the opportunistic pathogenic yeast Candida lusitaniae

We describe a new cloning-free strategy to delete genes in the opportunistic pathogenic yeast Candida lusitaniae. We first constructed two ura3 Δ strains in C. lusitaniae for their use in transformation experiments. One was deleted for the entire URA3 coding sequence; the other possessed a partial deletion within the coding region, which was used to determine the minimum amount of homology required for efficient homologous recombination by double crossing-over of a linear DNA fragment restoring URA3 expression. This amount was estimated to 200 bp on each side of the DNA fragment. These data constituted the basis of the development of a strategy to construct DNA cassettes for gene deletion by a cloning-free overlapping PCR method. Two cassettes were necessary in two successive transformation steps for the complete removal of a gene of interest. As an example, we report here the deletion of the LEU2 gene. The first cassette was constituted by the URA3 gene flanked by two large fragments (500 bp) homologous to the 5' and 3' non-coding regions of LEU2. After transformation of an ura3 Δ recipient strain and integration of the cassette at the LEU2 locus, the URA3 gene was removed by a second transformation round with a DNA cassette made by the fusion between the 5' and 3' non-coding regions of the LEU2 gene. The overall procedure takes less than 2 weeks and allows the creation of a clean null mutant that retains no foreign DNA sequence integrated in its genome.     

Effects of the smoking process on odour characteristics of smoked herring (Clupea harengus) and relationships with phenolic compound content

The relationship between smoking parameters and odour characteristics, evaluated by a trained sensory panel, were studied on smoked herring. In addition, a possible correlation between the content of 10 phenolic compounds and sensory perceptions was investigated. Five smoking techniques were applied, combining smoke production conditions, performed by pyrolysis of beech wood sawdust or by friction of beech wood log, with smoke deposition, either in a controlled kiln (traditional smoking) or by an electrostatic process. In the fifth smoking technique, a purified condensate of beech smokes was vaporised on fish fillets in the smokehouse. The time of smoking was 3 h for traditional smoking and the liquid smoke atomisation process and 12 min for the electrostatic method. The effects of three smoking temperatures (16, 24, 32 °C) were tested for both the traditional and the liquid smoke atomisation processes, as well as the effect of the position of the exhaust valve in the smokehouse in the case of the traditional method. Two different voltages were applied for the electrostatic process, 37 and 42 kV.     

An axiomatic characterization of the ranking based on the h-index and some other bibliometric rankings of authors

In the last few years, many new bibliometric rankings or indices have been proposed for comparing the output of scientific researchers. We propose a formal framework in which rankings can be axiomatically characterized. We then present a characterization of some popular rankings. We argue that such analyses can help the user of a ranking to choose one that is adequate in the context where she/he is working.     

Image segmentation by a contrario simulation

Segmenting an image into homogeneous regions generally involves a decision criterion to establish whether two adjacent regions are similar. Decisions should be adaptive to get robust and accurate segmentation algorithms, avoid hazardous a priori and have a clear interpretation. We propose a decision process based on a contrario reasoning: two regions are meaningfully different if the probability of observing such a difference in pure noise is very low. Since the existing analytical methods are intractable in our case, we extend them to allow a mixed use of analytical computations and Monte-Carlo simulations. The resulting decision criterion is tested experimentally through a simple merging algorithm, which can be used as a post-filtering and validation step for existing segmentation methods.     

Effect of initial powder type on the hydrogen storage properties of high-pressure torsion consolidated Mg

While severe plastic deformation (SPD) on bulk samples has been widely applied for modifying the H-sorption properties, there has been little attention towards the use of SPD on powder materials. In this context, the aim of the present work was to compare the H-storage properties of high-pressure torsion (HPT) consolidated products obtained from two distinct Mg powder precursors: atomized micro-sized and condensed ultrafine powder particles. The results showed that the nature of the initial powder precursor had a pronounced effect on the H-sorption behavior. The HPT product obtained from the condensed ultrafine powder showed faster absorption kinetics than the consolidated product obtained from the atomized powder. However, the HPT product obtained from atomized powder could absorb more hydrogen and showed faster desorption kinetics corresponding to a lower activation energy. These results are discussed by taking into account the effectiveness of the HPT process to refine the grain sizes and differences in the dispersion of fine MgO oxide particles.     

Experimental and Molecular Dynamics Simulations of Tribochemical Reactions with ZDDP: Zinc Phosphate–Iron Oxide Reaction

Zinc phosphate glass is considered to be the main constituent of tribofilms generated under boundary lubrication with zinc dialkyldithiophosphate (ZDDP), a well-known antiwear additive. The reaction occurring during friction between zinc phosphate glasses and steel native iron oxide layer is investigated by both an experimental approach and by Molecular Dynamics simulations (MD). The importance of this “tribochemical” reaction in the general ZDDP antiwear process is discussed.     

光学仿真分析在光电传感器开发过程中的应用

1 引言 光电传感器是指利用光电效应作为传感原理的传感器件,它主要由光源、光学通路、光电探测器等部分.光源发出的光照射到待检测的目标物体上,被目标物体调制后被光电探测器所接收.     

Zinc Dialkyl Phosphate (<Emphasis Type="Bold">ZP</Emphasis>) as an Anti-Wear Additive: Comparison with <Emphasis Type="Bold">ZDDP</Emphasis>

In this study, we are interested in the anti-wear properties of zinc dialkyl phosphate additive (ZP) in comparison with ‘classical’ zinc dialkyldithiophosphate (ZDDP). Friction tests were performed on a reciprocating tribometer using both ball-on-flat and cylinder-on-flat configurations under a Hertzian contact pressure of 0.9 GPa. Experiments were carried out as a function of temperature (25 and 100 °C), sliding speed (25, 50 and 100 mm/s) and additives concentrations. Ball wear scar diameters as well as friction coefficient were measured. In order to better understand the anti-wear mechanisms of these additives, friction tests were followed by surface analyses such as AES (Auger Electron Spectroscopy) and XPS (X-Ray Photoelectron Spectroscopy). Transmission Electron Microscopy (TEM) observations of the ZDDP and ZP tribofilms were also carried out to visualise the generated layers. The anti-wear capability of ZP molecule is discussed.     

On‐line acoustic attenuation spectroscopy of emulsions stabilized by vinyl alcohol–vinyl acetate copolymers: a model system for the suspension polymerization of vinyl chloride

BACKGROUND: Poly[(vinyl alcohol)‐co‐(vinyl acetate)] (PVA) copolymers obtained by partial hydrolysis of poly(vinyl acetate) are currently used as industrial stabilizers in the suspension polymerization of vinyl chloride monomer (VCM). Their molecular characteristics, mainly the average degree of hydrolysis (DH ) and average degree of polymerization (DPw ), have a major influence on the monomer droplet size and the properties of the final poly(vinyl chloride) resin. RESULTS: The average droplet size and size distribution of chlorobutane/water emulsions, as a model system for VCM/water emulsions, were studied using acoustic attenuation spectroscopy on‐line with an agitated laboratory reactor. The emulsions were stabilized by PVA with DH values between 73 and 88 mol% and DPw values between 450 and 2500. The effects of agitation speed, stirring time and concentration of the PVA copolymers were investigated. An attempt was made to correlate the interfacial tension and the droplet size. CONCLUSION: On‐line acoustic spectroscopy appears to be a suitable technique for the real‐time control of the droplet size of monomer suspensions. The advantages and limitations of the technique are outlined. The validity and the application limits of the commonly cited correlation between the droplet size and the Weber number are established for polymeric surfactant‐stabilized emulsions. Copyright © 2009 Society of Chemical Industry