Devolatilization of wood and wastes in fluidized bed

Experiments were carried out in a laboratory fluidized bed (FB) to characterize the devolatilization behavior of wood and various wastes at temperatures applicable to FB gasification and combustion, i.e. 750-900 °C. The fuels tested were pellets made of wood, meat and bone meal, and compost (from municipal solid wastes), as well as dried granulates of sewage sludge (DSS). Determination of yields of char, condensate and light gas, as well as the composition of the gas and the time of devolatilization during the pyrolysis of single fuel batches was made. A simple model was developed to analyze the mode of conversion of a single wood pellet and DSS granulate, giving insight on the controlling mechanisms during devolatilization. The devolatilization kinetics of DSS was determined by tests using fine granulates. The model was successfully applied to simulate the conversion of large DSS granulates and wood pellets under the whole range of temperatures analyzed.     

Great enhancement of mechanical features in PLA based composites containing aligned few layer graphene (FLG), the effect of FLG loading,size, and dispersion on mechanical and thermal properties

Four series of polylactide (PLA) based composite films containing horizontally aligned few layer graphene (FLG) flakes of high aspect ratio and adsorbed albumin are prepared. The mechanical and thermal properties varies with percentage, dispersion degree and size of FLG flakes. Great improvement up to 290% and 360% of tensile modulus and strength respectively were obtained for the composite containing high lateral size of FLG at 0.17% wt, and up to 60% and 80% for the composite with very well dispersed 0.02% wt FLG. The composites of PLA and PEG-PLLA containing very well dispersed FLG flakes at 0.07% wt are ductile showing enhancement of elongation at break up to respectively 80% and 88%. Relatively high electrical conductivity, 5 × 10⁻³ S/cm, is measured for PLA film charged with 3% of FLG.     

Ceramic Powder Bed Laser Sintering (CPBLS) on copper-doped hydroxyapatite: Creation of thin (5–50 μm thick) consolidated ceramic patterns

Implants made of ceramics, and more particularly of calcium phosphates (hydroxyapatite: HA, mainly), promoting intimate contact with natural bone are nowadays merging. Addition of copper ions in bio-ceramics is expected to increase the biological compatibilities of bone graft substitutes. Previous works have shown that copper-doped hydroxyapatite (Cu-doped HA) ceramics can be prepared by solid-state sintering between HA and CuO powder mixtures at about 1100 °C; but, copper-substituted HA was found to be metastable leading to apatitic grains and Cu-rich grain boundaries during the sintering process. Ultra-rapid sintering is so needed. Selective laser sintering (SLS) is an additive manufacturing process that possesses the advantage to be based on ultra-fast sintering process under laser irradiation. SLS being used in literature for the application of laser on polymer-ceramic or poymer-metal composites the proper term all along the paper is Ceramic Powder Bed Laser Sintering (CPBLS). To achieve densification of Cu-doped HA ceramics from CPBLS process, one should control the composition/morphology/structure of the powder bed as well as three other important CPBLS parameters: (i) the applied energy from the laser beam, (ii) the laser power and the laser scanning speed, (iii) the distance between two successive lased lines. In this paper, the impact of all the main CPBLS parameters controlling the sintering of dip-coated Cu-doped HA layers on glass substrates is carefully investigated. Possibility of the creation of thin consolidated Cu-doped HA ceramic patterns, using the ultra-fast CPBLS process, is finally shown.     

Response of Corn Seedlings (Zea mays L.) to Different Concentrations of Nitrogen in Absence and Presence of Silicon

Silicon - Corn plants are highly demanding of nitrogen and the application of silicon has been studied because it minimizes stress from different natures, and for the better utilization of some...     

An Efficient Method to Correct Under-Dispersion in Ensemble Streamflow Prediction of Inflow Volumes for Reservoir Optimization

Ensemble streamflow prediction (ESP) has been widely used to gain insight on possible future inflows to hydropower reservoirs. However underestimation of climate, model structure and initial condition uncertainty often leads to under-dispersed ESP forecasts. In this paper, we present a novel approach called “Hindcast-mode Uncertainty Estimation” (HUE) to efficiently add variability in ESP forecasts to reduce their under-dispersion. The method was tested on a Canadian catchment used by Rio Tinto – Aluminium division to produce hydropower for their aluminium smelting plants. This project was focused on correcting long-term predictions of freshet runoff volumes to optimize drawdown volumes, with up to 6 months of lead time. It was found that by adding an error term to the hydrological model’s snow water equivalent (SWE) state variable at the time of forecast in hindcasting mode, the resulting simulation could be forced to perfectly reproduce the freshet runoff volume. This error term was computed for all years on record which enabled modeling of the error’s distribution. This distribution can then be sampled from to add noise to the model’s SWE at the start of a new ESP forecast. Results show that the current winter ESP forecasts are strongly under-dispersed for the freshet runoff volume estimation and that the proposed method is able to widen the ESPs to correct the under-dispersion problem. This was validated by using Talagrand diagrams which shifted from a U-shape (prior to HUE) to a uniform distribution (with HUE). The project objectives of correcting the ESP forecast’s under-dispersion in spring runoff estimations was thus attained with minimal effort, bypassing the need to perform more complex ensemble data assimilation techniques.     

Beef sausage structure affected by sodium chloride and potassium lactate

A histological and ultrastructural study was conducted to characterize changes in the muscle fibre structure of three fresh sausage preparations, depending on meat composition, sodium chloride (NaCl) and potassium lactate (K-lactate) contents. After addition of 0.8% and 1.6% NaCl, 65% and 51%, respectively, of the area observed showed well preserved fibres (histological data). The altered regions presented a large disorganization of the myofilaments and a solubilization of the sarcolemma and of the Z lines. K-lactate addition had no marked effects on meat structure. The preparation containing some sheep meat was more sensitive to salt than the others containing only bovine meat. The level of alteration was much lower than those obtained in pork meat in another study. Technological conditions used to modify the internal muscle fibre structure during sausage processing depend on the species used. Therefore, the classification of the sausage preparation to “meat preparation” or “meat product” under the EU regulation (EC) No. 853/2004 (which assign meat preparations to meat if the product has undergone a process insufficient to modify the internal muscle fibre structure of the meat) must be systematically controlled when changing the meat sausage composition.     

Determination of daily dietary intake of chromium by duplicate diet sampling: in vitro availability study

Intake of chromium was estimated using a duplicate diet sampling method of 108 meals (36 breakfasts, 36 lunches and 36 dinners) from the restaurant of the Hospital of Motril (S.E. Spain), corresponding to 36 consecutive days. Total and dialyzable Cr levels were measured by a validated electro-thermal atomic absorption spectrometry (ETAAS) method. A mean Cr fraction of 26 +/- 12 microg meal (-1) was found. The Cr uptake from meals was directly and significantly (p < 0.001) correlated with their macronutrient (carbohydrates, fibre and protein) content. Cereals and cereal by-products, legumes, dry fruits, meat, potatoes, dairy products and seafood are the primary sources of Cr. The mean Cr fraction dialyzed through dialysis tubing was 1.2 +/- 1.1 microg meal(-1) (4.6 +/- 3.8% as mean Cr dialysability). Cr intake for breakfasts was significantly lower (p < 0.001). A correlation between the logarithmic data of total and dialyzable fraction of Cr in meals (p = 0.020) was found and dialysis ratio enhancement and, therefore, bioavailability increased with total Cr. The dialysed element content present in meals was significantly correlated with fibre, protein, Fe, Na, I, F, sodium, ascorbic acid and vitamin A levels (p < 0.05). At Fe contents in meals higher than congruent with7.5 mg meal(-1) the net absorption of Cr decreased significantly. The mean Cr daily dietary intake (DDI) was 77 +/- 17 microg day (-1) which indicates that no adverse effects in relation to Cr nutrition (deficiency or toxicity) should occur in individuals from the area.     

High accumulation of perfluorooctane sulfonate (PFOS) in marine tucuxi dolphins (Sotalia guianensis) from the Brazilian coast

Perfluorooctane sulfonate (PFOS) and other perfluoroalkyl compounds (PFCs) were measured in liver samples from 29 marine tucuxi dolphins from Rio de Janeiro state (RJ), Brazil. PFC measurement combined liquid chromatography and mass spectrometry, using a CapLC system connected to a Quadrupole-LIT mass spectrometer. PFOS was the only PFC detected and it was so in all samples. PFOS concentrations (ng x g(-1) dw) of dolphins (n=23) from the highly contaminated Guanabara Bay (in RJ) varied between 43 and 2431 as well as between 76 and 427 from areas of RJ other than the quoted bay (n=6). Concentrations of three fetuses and one neonate varied between 664 and 1590. Fetus/mother ratios were calculated in two situations (2.75 and 2.62). It seems that mother-to-calf transference plays important role for relationships between PFOS and age. When a one-year-old male calf presenting 2431 ng x g(-1) dw was excluded from the test, significant correlations were observed between PFOS concentrations and both age and total length. Despite the placental transference, PFOS concentrations were not significantly lower in females than in males. PFOS levels in marine tucuxi dolphins from Guanabara Bay are among the highest detected to date in cetaceans, and this may represent a threat to the small population concerned.     

Applied studies in solar photocatalytic detoxification: an overview

The technical feasibility and performance of photocatalytic degradation of four water-soluble pesticides (diuron, imidacloprid, formetanate and methomyl) have been studied at pilot scale in two well-defined systems which are of special interest because natural-solar UV light can be used for them: heterogeneous photocatalysis with titanium dioxide and homogeneous photocatalysis by photo-Fenton. The pilot plant is made up of compound parabolic collectors specially designed for solar photocatalytic applications. The initial concentration tested with imidacloprid, formetanate and methomyl was 50 and 30 mg/l with diuron, and the catalyst concentrations were 200 mg/l and 0.05 mM with TiO₂ and iron, respectively. Total disappearance of the parent compounds, 90% mineralisation and toxicity reduction below the threshold (EC₅₀) have been attained with all pesticides tested. All these results have contributed to an evaluation of photocatalytic treatment capacity and comments on the main parameters of TiO₂ and Fe separation from the treated water.     

Modelling biological efficacy decrease and rate of degradation of chlorpyrifos-methyl on wheat stored under controlled conditions

Insecticide residue degradation and pest survival were observed in wheat treated with a low dose of chlorpyrifos-methyl. Treated wheat was stored in small batches at three controlled temperatures and two levels of moisture content of grain, in equilibrium with r.h. in order to stabilise the water activity in the grain during a storage period of 126 d after insecticide application. Every 3 weeks, samples were taken from treated and untreated control grain in each storage condition. Chlorpyrifos-methyl residues declined regularly with time of storage and an exponential negative regression was fitted with high correlation coefficients in most situations of storage temperature and grain water activity (Aw). A multivariate model to show the respective influence of controlled variables involved in the model of residues breakdown (time, Aw, and temperature) was built up through a multiple regression. This model showed the respective importance of the water activity of grain kernels, temperature and formulation of chlorpyrifos-methyl and their combinations on the decline of residues. Simultaneously, the effectiveness of the residues was checked through bioassays with two target species: Sitophilus oryzae and Tribolium castaneum. Taking into account the intentionally low initial applied dose of chlorpyrifos-methyl, the period after application achieving complete kill of the two test insects was rather short and did not exceed 105 d for S. oryzae in the best conditions for control, i.e. low moisture content and temperature. For high Aw (0.8) and storage temperature 30°C, T. castaneum was effectively controlled (more than 95% kill) only on the day after the treatment, survival occurring at the next test date 21 d after the application. High moisture content and temperature and their interactions were the main variables influencing the decrease in the biological effectiveness with time. The concentration threshold for insect survival was slightly below 1 ppm chlorpyrifos-methyl and was influenced by storage and grain conditions. Implications of these findings on storage pest management practices and on the ability to predict the period of biological effectiveness of residues of chlorpyrifos-methyl are discussed.