Particulate organic matter transport in the lower Colorado river,South-Western USA

The lower Colorado River from Laughlin, Nevada, to the border with Mexico is one of the most regulated rivers in North America. An analysis of particulate organic matter (POM) transport through the system was made to determine POM concentrations, composition and point of origin, as well as to determine the effect dams had on this transport. Particulate organic matter concentrations generally increased from upstream to downstream, and were dominated by very fine organic detritus (< 25μm size fraction). Reservoirs released more POM than they received during spring and summer, but less during autumn and winter. Reservoirs recycled POM, taking in organic detritus and discharging small limnoplankton. Backwater complexes functioned as filters during storm events, trapping coarse material and releasing fine material. Agricultural drains made only minor contributions of POM, but provided important nutrients for in-channel production of POM. Water diversions forced POM off-channel, whereas sluicing operations reduced inorganic loads in the canals. Despite the presence of six mainstem dams, the lower reaches support a diverse assemblage of detritivorous fishes, similar to that found in the lowermost reaches of natural, unregulated rivers. The food base for this fishery stems from autochthonous production of POM.     

Soft tissue tumours

Any soft tissue swelling beneath the deep fascia should be considered a sarcoma until proven otherwise. As the most important factor in the primary treatment of these cancers is the adequacy of the primary surgical resection, it is vital to diagnose these malignant tumours pre-operatively. The modern treatment of soft tissue sarcomas may involve all modalities, but the most important aspect of treatment of a primary localised sarcoma is wide excisional surgery preserving limb function. Radiotherapy is a vital adjunct in high-grade tumours, or in tumours whose resectability is limited either by size or anatomical proximity to vital structures. Apart from a few chemosensitive sarcomas, the role of chemotherapy is limited to treatment of metastatic disease where documented response rates are no greater than 30%. As 50% of patients with high-grade sarcomas will die from metastatic disease, improvements in survival rates will only come from improvements in response to systemic therapy. No controlled trials have shown any survival benefit for adjuvant chemotherapy, although a recent meta-analysis of published data has shown a trend to increased survival at two years. Multicentre randomised trials are ongoing. The prognosis of these lesions is highly variable, but is intimately related to the anatomical site (i.e., resectability), and also the grade and size of the tumour.     

Paracetamol poisoning in the north east of England: presentation, early management and outcome

1. Paracetamol is increasingly involved in self-poisoning in the United Kingdom and remains a common cause of fatal poisoning. 2. To document the epidemiology and early management of paracetamol poisoning data were collected on consecutive patients with suspected paracetamol poisoning presenting to 6 hospitals in the North East of England over 12 weeks in 1994. 3. There were 400 presentations (attendance rate 1.14/10(3) population/yr) involving 343 persons (45% male). Paracetamol concentrations at 4 h correlated weakly with reported paracetamol dose (R = 0.49, P < 0.0001) and were similar comparing those treated and not treated by gastric decontamination. 4. In 38 (9%) cases paracetamol concentrations were above the appropriate nomogram treatment line, including 3% and 20% of patients who reported ingesting less than and more than 12 g respectively. In 21 patients acetylcysteine treatment was deferred until admission to the ward, the mean delay involved was 2.8 h. 5. One patient died, from arrhythmias caused by co-ingested dothiepin. 6. Paracetamol poisoning is common. Most cases do not have potentially toxic plasma paracetamol concentrations, but those who do often present late and antidotal treatment may be delayed inappropriately.     

Comparison of supports for the direct synthesis of hydrogen peroxide from H2 and O2 using Au–Pd catalysts

The direct synthesis of hydrogen peroxide from H₂ and O₂ using a range of supported Au–Pd alloy catalysts is compared for different supports using conditions previously identified as being optimal for hydrogen peroxide synthesis, i.e. low temperature (2 °C) using a water–methanol solvent mixture and short reaction time. Five supports are compared and contrasted, namely Al₂O₃, -Fe₂O₃, TiO₂, SiO₂ and carbon. For all catalysts the addition of Pd to the Au only catalyst increases the rate of hydrogen peroxide synthesis as well as the concentration of hydrogen peroxide formed. Of the materials evaluated, the carbon-supported Au–Pd alloy catalysts give the highest reactivity. The results show that the support can have an important influence on the synthesis of hydrogen peroxide from the direct reaction. The effect of the methanol–water solvent is studied in detail for the 2.5 wt% Au–2.5 wt% Pd/TiO₂ catalyst and the ratio of methanol to water is found to have a major effect on the rate of hydrogen peroxide synthesis. The optimum mixture for this solvent system is 80 vol.% methanol with 20 vol.% water. However, the use of water alone is still effective albeit at a decreased rate. The effect of catalyst mass was therefore also investigated for the water and water–methanol solvents and the observed effect on the hydrogen peroxide productivity using water as a solvent is not considered to be due to mass transfer limitations. These results are of importance with respect to the industrial application of these Au–Pd catalysts.     

Musculoskeletal status and disability of MMPI profile subgroups among patients with low back pain.

Studied Minnesota Multiphasic Personality Inventory (MMPI) profiles of 362 patients with acute and chronic low back pain (LBP) for replicable homogeneous subgroups using 3 cluster-analysis procedures. Two normal and 3 clinically elevated profile subgroups were identified. The 2 normal subgroups were characterized by relatively normal musculoskeletal condition and were least disabled but differed from each other in duration of pain, presence of physical abnormalities, and daily functioning. The most pathologic profile subgroup consisted largely of acute-pain patients whose musculoskeletal condition and daily functioning were similar to those of the normal subgroups. Patients in the 3 abnormal MMPI subgroups were exposed to more LBP physical-risk factors in the workplace. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Ranking with uncertain labels and its applications

The techniques for image analysis and classification generally consider the image sample labels fixed and without uncertainties. The rank regression problem studied in this paper is based on the training samples with uncertain labels, which often is the case for the manual estimated image labels. A core ranking model is designed first as the bilinear fusing of multiple candidate kernels. Then, the parameters for feature selection and kernel selection are learned simultaneously by maximum a posteriori for given samples and uncertain labels. The provable convergency Expectation Maximization (EM) method is used for inferring these parameters in an iterative manner. The effectiveness of the proposed algorithm is finally validated by the extensive experiments on age ranking task and human tracking task. The popular FG-NET and the large scale Yamaha aging database are used for the age estimation experiments, and our algorithm outperforms those state-of-the-art algorithms ever reported by other interrelated literatures significantly. The experiment result of human tracking task also validates its advantage over conventional linear regression algorithm. A short version of this paper appeared in ICME07.     

Bidirectional calibration results for 11 spectralon and 16 BaSO4 reference reflectance panels

Eleven Spectralon¹ (a sintered polytetrafluoroethylene-based material) and 16 BaSO₄ reference reflectance panels were calibrated using a field calibration technique. The Spectralon panels differed both in their directional/hemispherical and directional/directional reflectance. However, the differences were sufficiently small that “general” calibration equations were developed. For panels constructed of the same material and with the same methods as those used in these experiments, the directional/directional reflectance may be within ± 0.020 at 10°, ± 0.015 at 45°, and ± 0.041 at 80° of that predicted by the “general” equations. For field measurements, these values are considerably better than those that would be obtained using a value of the directional/hemispherical reflectance. The directional/directional reflectance of the 16 BaSO₄ panels varied considerably among panels, so much so that it was not feasible to develop “general” calibration equations. Apparently, the nonlambertian properties of BaSO₄ panels are dependent upon the method of applying the barium sulfate coating.     

A 533-MHz BiCMOS superscalar RISC microprocessor

This 533-MHz BiCMOS very large scale integration (VLSI) implementation of the PowerPC architecture contains three pipelines and a large on-chip secondary cache to achieve a peak performance of 1600 MIPS. The 15 mm×10 mm die contains 2.7 M transistors (2M CMOS and 0.7 M bipolar) and dissipates less than 85 W. The die is fabricated in a six-level metal, 0.5-μm BiCMOS process and requires 3.6 and 2.1 V power supplies