A comparison between the enhanced mass transfer in boundary and pressure driven oscillatory flow

Mass transport in pulsating flow devices using either moving boundaries or oscillating imposed pressure drops are compared with each other by means of a calculation using a simple model. We conclude that there is no difference between the two configurations as long as one is interested only in the power required to move the fluid for the convective mass transport achieved. However, the boundary driven configuration is more efficient if the power is divided by the total mass transport where both the diffusive and convective parts are taken into account, the boundary driven configuration is more efficient. The amplitude of the piston stroke in the pressure driven configuration and the amplitude in the boundary driven case are assumed to be the same, and the inertia of the moving devices themselves are ignored in this calculation.     

Microscopical studies of water/flour systems

Summary Wheat flour particles sprinkled on a water surface form strands which are visible in the light microscope. These strands form aggregates by means of mechanical forces which show viscoelastic behaviour. Amino acid analysis of both the protein strands and the aggregates formed shows that they consist of gluten protein. The formation of the protein strands occurs at the air/water interface and results from the action of a protein film which spreads around the flour particles.

---

Mikroskopische Untersuchungen von Mehl/Wasser-Systemen

Zusammenfassung Weizenmehlpartikel, die auf Wasser gestreut werden, bilden lichtmikroskopisch sichtbare Stränge aus. Durch mechanische Beanspruchung lassen sich these Stränge zu Aggregaten zusammenfassen, die visco-elastisches Verhalten zeigen. Die Aminosäureanalyse sowohl der Proteinstrange wie auch der daraus gebildeten Aggregate zeigt, daß es sich dabei um Kleberprotein handelt. Die Proteinfäden entstehen an der Wasser-Luft-Grenzflache als Folge eines spreitenden Proteinfilms, der sich um die Mehlpartikel herum ausbreitet.

     

Betriebsvereinbarung contra BDSG?

Ob Betriebsvereinbarungen im Sinne des § 4 Abs. 1 BDSG eine „andere Rechtsvorschrift” sind und damit die Regelungen des BDSG einschr?nken dürfen, geh?rt zu den Standardfragen des praktischen Arbeitnehmerdatenschutzes. Die Autoren befürworten eine weite betriebliche Regelungskompetenz, beschr?nken diese aber zum Schutz der Arbeitnehmer durch eine Reihe datenschutzrechtlicher Mindestanforderungen, die Betriebsvereinbarungen einzuhalten haben.     

Control of free-radical emulsion polymerization of methyl methacrylate by oxygen injection. II. Experimental study

Oxygen injection has been proposed and experimentally demonstrated as an effective control measure for limiting the rate of heat release and altering the rate of polymerization in emulsion processes. A detailed mathematical model has been previously developed to describe the system behavior with and without oxygen injection. A simple lab scale apparatus was constructed and run extensively. Only trace quantities of oxygen are needed to inhibit the reaction completely. The facile response makes this method attractive for fast temperature control. However, because of the rapid penetration of dissolved oxygen into the polymer particles, growing radical chains are terminated prematurely, lowering product molecular weights. To minimize this detrimental effect, pulsed oxygen control is used and extensive experimental work was performed to determine the effects of controller set points on molecular weight. Moderate oxygen flows and moderate set point temperatures are found to give the optimal response without significant lowering of the final molecular weight. Injected quantities agree well with the order-of-magnitude sparging calculations needed to completely stop initiation. However, complete agreement between model simulations and experimental results was not reached due to an unmeasured loss of monomer from the reactor. Chain transfer to monomer is found to be important in modeling the polymer molecular weight. It has, however, a negligible effect on the reaction rate.     

Identification of microstructural zones and thermal cycles in a weldment of modified 9Cr-1Mo steel

This paper presents the results of a study on the microstructural and microchemical variations in a multipass Gas Tungsten Arc weld (GTAW) of modified 9Cr-1Mo steel. The changes brought about in the steel due to the heating and cooling cycles during welding and the subsequent effects due to reheating effects during multipass welding are described. Detailed analytical transmission electron microscopy has been carried to study the type and composition of the primary and secondary phases in this steel. The systematic changes in microstructural parameters such as Prior Austenite Grain Size, martensite lath size, number density, size and microchemistry of carbides, have been understood based on the different transformations that the steel undergoes during the heating and cooling process. Based on the observed microstructure, an attempt has been made to identify distinct microstructural zones and possible thermal cycles experienced by different regions of the weldment.     

Parallel path consistency

Filtering algorithms are well accepted as a means of speeding up the solution of the consistent labeling problem (CLP). Despite the fact that path consistency does a better job of filtering than arc consistency, AC is still the preferred technique because it has a much lower time complexity. We are implementing parallel path consistency algorithms on multiprocessors and comparing their performance to the best sequential and parallel arc consistency algorithms.^(1,2) (See also work by Kerethoet al. ⁽³⁾ and Kasif⁽⁴⁾) Preliminary work has shown linear performance increases for parallelized path consistency and also shown that in many cases performance is significantly better than the theoretical worst case. These two results lead us to believe that parallel path consistency may be a superior filtering technique. Finally, we have implemented path consistency as an outer product computation and have obtained good results (e.g., linear speedup on a 64K-node Connection Machine 2).     

Comments on "Computer-Assisted Continuous Infusion of the Intravenous Analgesic Fentanyl During General Anesthesia?An Interactive System"

This communication shows an algorithm used in the drug infusion system discussed in a recent paper1 to be incorrect. The error is corrected, and a new algorithm is presented.