A kinetic study of Am(III)/humic colloid interactions

The interaction kinetics of the Am(III) ion with aquatic humic colloids is investigated under near-natural conditions by column experiments with a sandy aquifer sample rich in humic substancesforthe appraisal of the migration behavior of Am. The association and dissociation kinetics of the Am ion onto and from humic colloids control the migration of colloid-borne Am. As the contact time between Am and humic colloids prior to introduction into a column is increased, the mobility of colloid-borne Am is enhanced and hence the recovery of Am in the effluent increases. On the other hand, an increase of the migration time and residence time in column, respectively, reduces the Am recovery. Considering these experimental results a refined version of the kinetic model KICAM (Kinetically Controlled Availability Model), which suggests different Am binding modes with humic colloids, was developed. Applying KICAM it is possible to predict static and dynamic experiments affected by the kinetically controlled Am/humic colloid interactions over the range of 1 h up to several months. However, to apply these experimental results to long-term conditions, the Am binding scheme as proposed in KICAM needs to be verified. This paper provides, therefore, a basis for a better understanding of the colloid-borne Am migration in porous aquifer systems.     

Impact of amorphous and crystalline lactose on milk chocolate properties

Chocolate mass of low viscosity is preferred for most applications. Milk powder influences processing behaviour, flow properties and taste of milk chocolate. The project aimed to investigate influences of skim milk powders containing amorphous or crystalline lactose on flow properties after producing samples by roller milling and conching or alternatively by ball milling. For the first case, it was found that mass consistency before roller milling is strongly influenced by lactose type; producers must specify it and adapt initial mass fat content. Little impact on final products was found after processing milk powders at equilibrium moisture. If predried powders are used for reducing conching time, crystalline lactose leads to chocolate with slightly lower viscosity. At ball mill processing, crystalline lactose resulted in significantly lower viscosity, for example 15% at 40 s^?1; thus, for this process, it can be recommended to use special milk powders high in crystalline lactose content.     

Occurrence, sources, and fate of benzothiazoles in municipal wastewater treatment plants

A set of six benzothiazoles was determined in effluents of three municipal wastewater treatment plants. Total concentrations of benzothiazoles ranged from 1.9 to 6.7 microg/ L, with benzothiazole-2-sulfonate (BTSA) being most prominent (35 - 70%), followed by benzothiazole, 2-hydroxybenzothiazole, and 2-methylthi benzothiazole (MTBT). The removal of benzothiazoles in tertiary municipal wastewater treatment was investigated in more detail in one of the plants during two sampling periods of several weeks. Total benzothiazole concentration decreased by 5-28% only. This very limited removal was primarily due to BTSA and MTBT that were either hardly removed or even increased in concentration. In street runoff benzothiazoles exceeded the wastewater concentrations by 1 order of magnitude, showing that surface runoff can be a significant source of benzothiazole emission. In household wastewater total concentrations were in the range of 50-80% of that found in municipal wastewater. These investigations outline that benzothiazoles, a class of polar and biologically active industrial chemicals, are regularly released with treated municipal wastewater and exhibit a considerable lifetime in surface waters.     

On-road measurement of particle emission in the exhaust plume of a diesel passenger car

Particle size distributions were measured under real world dilution conditions in the exhaust plume of a diesel passenger car closely followed by a mobile laboratory on a high speed test track. Under carefully controlled conditions the exhaust plume was continuously sampled and analyzed inside the mobile laboratory. Exhaust particle size distribution data were recorded together with exhaust gas concentrations, i.e., CO, CO2, and NO(x), and compared to data obtained from the same vehicle tested on a chassis dynamometer. Good agreement was found for the soot mode particles which occurred at a geometric mean diameter of approximately 50 nm and a total particle emission rate of 10(14) particles km(-1). Using 350 ppm high sulfur fuel and the standard oxidation catalyst a bimodal size distribution with a nucleation mode at 10 nm was observed at car velocities of 100 km h(-1) and 120 km h(-1), respectively. Nucleation mode particles were only present if high sulfur fuel was used with the oxidation catalyst installed. This is in agreement with prior work that these particles are of semivolatile nature and originate from the nucleation of sulfates formed inside the catalyst. Temporal effects of the occurrence of nucleation mode particles during steady-state cruising and the dynamical behavior during acceleration and deceleration were investigated.     

Uptake of Cm(III) and Eu(III) by calcium silicate hydrates: a solution chemistry and time-resolved laser fluorescence spectroscopy study

The interaction of the two chemical homologues [Cm(III) and Eu(III)] with calcium silicate hydrates (CSH phases) at pH 13.3 has been investigated in batch-type sorption studies using Eu(III) and complemented with time-resolved laser fluorescence spectroscopy (TRLFS) using Cm(III). The sorption data for Eu(III) reveal fast sorption kinetics and a strong uptake by CSH phases with distribution ratios of (6 +/- 3) x 10(5) L kg(-1). Three different Cm(III) species have been identified: A nonfluorescing species, which was identified as a curium hydroxide (surface) precipitate, and two fluorescing Cm(III)/CSH-sorbed species. The fluorescing sorbed species have characteristic emission spectra with main peak maxima at 618.9 and 620.9 nm and fluorescence emission lifetimes of 289 +/- 11 and 1482 +/- 200 micros, respectively. From the fluorescence lifetimes, it was calculated that the two fluorescing Cm(III) species have one or two and no water molecules left in their first coordination sphere, suggesting that these species are incorporated into the CSH structure. A structural model for Cm(III) and Eu(III) incorporation into CSH phases is proposed based on the substitution for Ca at two different types of sites in the CSH structure.     

Environmental influences on the partitioning and diffusion of hydrophobic organic contaminants in microbial biofilms

A biofilm reactor was used to investigate kinetic and thermodynamic aspects of the sorption of polycyclic aromatic hydrocarbons (PAH) as model compounds for hydrophobic organic contaminants (HOC) to intact microbial biofilms. Effective diffusion coefficients are in the range of 10(-10) cm2 x s(-1) resulting in equilibration times of more than 3 days for a biofilm of 100 microm thickness. Diffusion in the biofilm was strongly temperature-dependent and increased by a factor of 3 (phenanthrene) to 6 (fluoranthene, pyrene) between 5 and 35 degrees C. Drying and rewetting of the biofilm as well as the inclusion of Ca2+ ions and of humic acids all strengthened the biofilm rigidity and slowed down the diffusion of PAH. The later two factors also influenced the thermodynamics of the process as they supported the partitioning of PAH into the biofilm. Humic acid inclusion from solution into the biofilm illustrates that a microbial biofilm can act as a primer allowing for the buildup of a particulate organic phase from dissolved organic matter. PAH metabolites (3-hydroxy-phenanthrene and 1-hydroxy-2-naphthoic acid) showed lower partition coefficients as compared to their parent compounds and 3-hydroxy-phenanthrene also showed a higher diffusion constant, indicating that these transformation products would be easily released into the water phase upon formation during PAH biodegradation in a biofilm. These results allow the quantification of the influence of environmental conditions on a biofilm's function as a sink or as a diffusion barrier for PAH from aqueous solution, and they indicate the importance of kinetic aspects of this partitioning process.     

Photoluminescence and electroluminescence imaging of perovskite solar cells

Fast camera‐based luminescence‐imaging measurements on perovskite solar cells are presented. The fundamental correlation between the luminescence intensity and the open circuit voltage predicted by the generalised Planck law is confirmed, enabling various quantitative methods for the detection of efficiency‐limiting defects to be applied to this new cell structure. Interstinegly, it is found that this fundamental correlation is valid only for light‐soaked devices. Copyright © 2015 John Wiley & Sons, Ltd.     

AI in Process Industries – Current Status and Future Prospects

The chemical industry is one of the key industrial sectors in Germany and at the same time one of the largest consumers of energy and raw materials. A successful energy transition and the development of a circular economy can only succeed if they are actively supported and shaped by the chemical industry – through the redesign of existing production processes and the exploration and implementation of new process routes. The challenge is to realize this transformation within a very short time and for many production processes, whereby a much larger number of process routes must be explored. Digital technologies are key to master this transformation towards more sustainability, climate, and environmental protection. The KEEN project aims to explore and leverage artificial intelligence (AI) opportunities in process industry. The newly developed AI methods are tested wherever possible in real working environments and production plants to prove the economic benefit, applicability, and reliability of the methods and technologies.