管材超声波分层缺陷检测中盲区的构成探析

管材超声波分层检测作为控制产品质量的关键步骤,必须引起相关从业人员的重视,特别是要重点分析分层缺陷检测中盲区的构成原因和分布特征。只有这样,才能切实保证检测结果的准确性,更好地控制管材质量。通过对超声波分层缺陷检测的重要性进行阐释,分析了其中盲区的构成和分布等问题。     

壳聚糖固定化脲酶生物传感器选择性测定铜离子

基于重金属对脲酶的抑制作用,研制了用于测定铜离子的生物传感器。该生物传感器的制备以壳聚糖为载体,将脲酶固定于pH电极表面。由于壳聚糖对Cu2+的富集,该生物传感器展现出高灵敏度。在样品溶液中加入5 mmol/L NaI,可以消除Hg2+和Ag+的干扰,从而实现Cu2+的选择性检测。在0.005～0.5μg/mL的浓度范围内,脲酶活性的抑制率与Cu2+浓度的对数呈良好的线性响应关系,其检出限为0.002μg/mL。将使用后的生物传感器浸泡于0.5 mmol/L的EDTA溶液再生5 min,被Cu2+抑制的脲酶的活性可以得到恢复。     

纸·质的设计表情

纸张不只是设计作品的介质,它亦属于设计的一部分。善于利用纸张的不同形态、质感,结合对受众人群的判断,将纸张的不同特性巧妙的融入适宜的设计之中,使纸张本身成为设计的元素之一,从而丰富我们的设计语言与设计体验,使默默无语的纸张成为具有情感与生命力的设计载体。在设计中分析和利用纸的不同质感所触及的受众心理感觉和意向,来点化作品的情感表达,引导人们去想象和体味。     

Photoelectric conversion of photosynthetic reaction center in multilayered films fabricated by layer-by-layer assembly

Multilayered protein films which contained ordered layers of photosynthetic reaction center (RC) from Rhodobacter Sphaeroides (RS601) were assembled by means of alternate electrostatic adsorption with positively charged poly(diallyldimethylammonium chloride) (PDDA). The assembly of RC was monitored by spectrometry and photocurrent measurement. Linear film growth was observed up to about 20 cycles of adsorption. For the monolayer film, the photocurrent was about 8.5 nA cm⁻². For the multilayered film, the total photocurrent was about 77 nA cm⁻² for the 24-layer RC film, while the average photocurrent increment per adsorption cycle was about 3.2 nA cm⁻². The overall light-to-electricity conversion efficiency for a 24-layer film was about eight times higher than that for the monolayer one. The effects of electrode potential and pH on the photocurrent were also measured to illustrate the light-to-electric converting mechanism.     

Coordination between strategic forest management and tactical logistic and production planning in the forestry supply chain

In this paper, we study the coordination mechanism in the forestry supply chain between strategic forest management and tactical production planning. We first formulate an integrated model to establish a theoretical benchmark for performance of the entire supply chain. It is a mixed integer programming model that involves harvesting, bucking, transportation, production, and sales decisions for both tactical and strategic planning levels. We then present two sequential approaches S‐A and S‐B where the coordination is done through internal pricing. S‐A is the approach currently used in practice where harvesting in the forest is the main driver of the supply chain activities and internal pricing is introduced to control bucking decision in a separate stage. In contrast, S‐B takes downstream demand information into consideration and internal pricing directly influences harvesting decision in the first stage. In order to find the appropriate setting of internal pricing that leads to the system optimum, we suggest two heuristics H‐I and H‐II. The internal pricing in H‐I is based on dual values and in H‐II, it is derived from a Lagrangian decomposition. A real‐life case study in the Chilean forestry industry is used to compare the results of different approaches. It is shown that the new sequential approach S‐B generates as good feasible solution as that obtained from the integrated approach but in much less time. Both heuristics H‐I and H‐II bring about near‐optimal feasible solutions. H‐II also provides optimistic bound of the optimal objective function value, which can be used as a measure of the solution quality.     

纸·质的设计表情

纸张不只是设计作品的介质,它亦属于设计的一部分。善于利用纸张的不同形态、质感,结合对受众人群的判断,将纸张的不同特性巧妙的融入适宜的设计之中,使纸张本身成为设计的元素之一,从而丰富我们的设计语言与设计体验,使默默无语的纸张成为具有情感与生命力的设计载体。在设计中分析和利用纸的不同质感所触及的受众心理感觉和意向,来点化作品的情感表达,引导人们去想象和体味。     

数据加密技术在计算机安全中的应用

随着计算机网络技术的不断发展,计算机互联网在人们的生活中应用越来越广泛,网络安全问题也随之而来。目前的计算机安全存在着诸多因素的威胁,研究人员也在致力于这方面的研究与发展,应用先进的技术来保证计算机安全,为计算机用户的信息安全提供更高的保障。本文将针对计算机安全问题进行分析,探讨数据加密技术在计算机安全中的应用。     

Companion robots for older adults: Rodgers’ evolutionary concept analysis approach

Intelligent Service Robotics - This study aims to analyze the concept of companion robots for older adults from the perspective of nursing. This study employed a concept analysis. The literature...     

Effects of laser heat treatment on the fracture morphologies of X80 pipeline steel welded joints by stress corrosion

The surfaces of X80 pipeline steel welded joints were processed with a CO2 laser, and the effects of laser heat treatment （LHT） on H2S stress corrosion in the National Association of Corrosion Engineers （NACE） solution were analyzed by a slow strain rate test. The fracture morphologies and chemical components of corrosive products before and after LHT were analyzed by scanning electron microscopy and energy-dispersive spectroscopy, respectively, and the mechanism of LHT on stress corrosion cracking was discussed. Results showed that the fracture for welded joints was brittle in its original state, while it was transformed to a ductile fracture after LHT. The tendencies of hydrogen-induced corrosion were reduced, and the stress corrosion sensitivity index decreased from 35.2% to 25.3%, indicating that the stress corrosion resistance of X80 pipeline steel welded joints has been improved by LHT.