Active Packaging Applications for Food

The traditional role of food packaging is continuing to evolve in response to changing market needs. Current drivers such as consumer's demand for safer, “healthier,” and higher‐quality foods, ideally with a long shelf‐life; the demand for convenient and transparent packaging, and the preference for more sustainable packaging materials, have led to the development of new packaging technologies, such as active packaging (AP). As defined in the European regulation (EC) No 450/2009, AP systems are designed to “deliberately incorporate components that would release or absorb substances into or from the packaged food or the environment surrounding the food.” Active packaging materials are thereby “intended to extend the shelf‐life or to maintain or improve the condition of packaged food.” Although extensive research on AP technologies is being undertaken, many of these technologies have not yet been implemented successfully in commercial food packaging systems. Broad communication of their benefits in food product applications will facilitate the successful development and market introduction. In this review, an overview of AP technologies, such as antimicrobial, antioxidant or carbon dioxide‐releasing systems, and systems absorbing oxygen, moisture or ethylene, is provided, and, in particular, scientific publications illustrating the benefits of such technologies for specific food products are reviewed. Furthermore, the challenges in applying such AP technologies to food systems and the anticipated direction of future developments are discussed. This review will provide food and packaging scientists with a thorough understanding of the benefits of AP technologies when applied to specific foods and hence can assist in accelerating commercial adoption.     

Survival factors regulating ovarian apoptosis -- dependence on follicle differentiation

Only a minute fraction of the ovarian follicles present in a fetal ovary will complete the path to ovulation. Most of the follicles will undergo atresia, a hormonally controlled apoptotic process. Apoptosis occurs at each stage of follicular development and there is a marked reduction in the number of follicles present at birth. Stage-dependent mechanisms of follicle survival can be postulated to achieve co-ordinated development, leading to ovulation of a small fraction of follicles. Indeed, hormone and growth factor regulation of follicular atresia is stage-specific. This short review considers the factors that promote survival of ovarian follicles throughout development, including endocrine, locally produced and intracellular mediators, as exemplified mainly by follicular development in rodents. In primordial follicles, oocyte apoptosis is considered to be the cause of subsequent follicle degeneration. In slow-growing preantral follicles, FSH is not a survival factor, but some locally produced growth factors are. Progression to the antral follicle stage is probably the most critical stage of follicle development in vivo, and FSH is a major survival factor at this stage. In addition, insulin-like growth factor I and interleukin 1beta are potent survival factors for cultured rat follicles at the antral stage. Preovulatory follicles express receptors for LH, and both of the gonadotrophins are survival factors at this stage. Relatively little is known about the period between the LH surge and ovulation; however, it has been suggested that at this stage progesterone acts as a survival factor.     

Characterization of Galactomannan Stabilised Yogurt Drink Using Dynamic Rheology

A stabilised yogurt drink (SYD) was produced by mixing yogurt and water with the galactomannans guar (GG) and locust bean (LBG) gum at concentrations of 0.02, 0.06, 0.10, 0.14, and 0.20 g/100 g. The resulting colloid mixtures' viscous behaviour and stability was investigated. Rheological characterization using oscillatory methodology revealed that dynamic properties of elastic (G′), viscous (G″) modules and complex viscosity (η*) appreciably increased with increasing addition of both gums. Changing shear stress demonstrated complex flow behaviour and revealed the shear dependency of the SYD's flow behaviour. Syneresis decreased with increasing viscosity giving 93% improvement at 0.2 g/100 g gum addition.     

Antimicrobial Activity of Nisin and Natamycin Incorporated Sodium Caseinate Extrusion‐Blown Films: A Comparative Study with Heat‐Pressed/Solution Cast Films

Antimicrobial edible films based on sodium caseinate, glycerol, and 2 food preservatives (nisin or natamycin) were prepared by classical thermomechanical processes. Food preservatives were compounded (at 65 °C for 2.5 min) with sodium caseinate in a twin‐screw extruder. Anti‐Listeria activity assays revealed a partial inactivation of nisin following compounding. Thermoplastic pellets containing food preservatives were then used to manufacture films either by blown‐film extrusion process or by heat‐press. After 24 h of incubation on agar plates, the diameters of K. rhizophila growth inhibition zones around nisin‐incorporated films prepared by solution casting (control), extrusion blowing or heat pressing at 80 °C for 7 min of nisin‐containing pellets were 15.5 ± 0.9, 9.8 ± 0.2, and 8.6 ± 1.0 mm, respectively. Since heat‐pressing for 7 min at 80 °C of nisin‐incorporated pellets did not further inactivate nisin, this indicates that nisin inactivation during extrusion‐blowing was limited. Moreover, the lower diameter of the K. rhizophila growth inhibition zone around films prepared with nisin‐containing pellets compared to that observed around films directly prepared by solution casting confirms that nisin inactivation mainly occurred during the compounding step. Natamycin‐containing thermoplastic films inhibited Aspergillus niger growth; however, by contrast with nisin‐containing films, heat‐pressed films had higher inhibition zone diameters than blown films, therefore suggesting a partial inactivation of natamycin during extrusion‐blowing.     

Methane production,rumen fermentation,and diet digestibility of Holstein and Jersey dairy cows being divergent in residual feed intake and fed at 2 forage-to-concentrate ratios

Improving feed efficiency of dairy cows through breeding is expected to reduce enteric methane production per unit of milk produced. This study examined the effect of 2 forage-to-concentrate ratios on methane production, rumen fermentation, and nutrient digestibility in Holstein and Jersey dairy cows divergent in residual feed intake (RFI). Before experimental onset, RFI was estimated using a random regression model on phenotypic herd data. Ten lactating Holstein and 10 lactating Jersey cows were extracted from the herd and allocated to a high or low pre-experimental RFI group of 5 animals each within breed. Cows were fed ad libitum with total mixed rations either low (LC) or high (HC) in concentrates during 3 periods in a crossover design with a back-cross and staggered approach. Forage-to-concentrate ratio was 68:32 for LC and 39:61 for HC. Cows adapted to the diets in 12 to 24 d and feces were subsequently collected on 2 d. Afterward, gas exchange was measured in respiration chambers and rumen liquid was collected once after cows exited the chambers. Pre-experimental RFI was included in the statistical analysis as a class (low and high RFI) or continuous variable. Methane per kilogram of dry matter intake (DMI) was lower for Holsteins than Jerseys and the response to increased concentrate level was more pronounced for Holsteins than Jerseys (27.2 vs.13.8%); a similar pattern was found for the acetate:propionate ratio. However, methane production per kilogram of energy-corrected milk (ECM) was unaffected by breed. Further, total-tract digestibility of neutral detergent fiber was higher for Jerseys than Holsteins. For RFI as a class variable, DMI, methane production regardless of the expression, and digestibility were unaffected by RFI. For RFI as a continuous variable, DMI was lower and methane per kilogram of DMI was higher for cows with negative (efficient) than positive (inefficient) RFI values, and neutral detergent fiber digestibility was higher for Holsteins with negative than positive RFI values, but not for Jerseys. Daily methane production and methane per kilogram of ECM were unaffected by RFI. In conclusion, methane per kilogram of DMI of Jerseys was lowered to a smaller extent in response to the HC diet than of Holsteins. When pre-experimental RFI was used as a continuous variable, higher methane per kilogram of DMI was found for cows with negative RFI than positive RFI values, but not for methane per kilogram of ECM. These findings call for validation in larger studies.     

Pyrrolizidine alkaloids in food: downstream contamination in the food chain caused by honey and pollen

In recent years, there has been a steadily growing number of published data on pyrrolizidine alkaloids (PAs) in honey and pollen. This raises the question whether honey and/or pollen used as ingredients in food processing might provoke a downstream contamination in the food chain. Here we addressed two different facets in connection with PAs in honey and pollen. First, we analysed the PA content of several food types such as mead (n = 19), candy (n = 10), fennel honey (n = 9), soft drinks (n = 5), power bars and cereals (n = 7), jelly babies (n = 3), baby food (n = 3), supplements (n = 3) and fruit sauce (n = 1) that contained honey as an ingredient in the range of 5% to approximately 37%. Eight out of 60 retail samples were tested as being PA-positive, corresponding to 13%. Positive samples were found in mead, candy and fennel honey, and the average PA content was calculated to be 0.10 μg g(-1) retronecine equivalents (ranging from 0.010 to 0.484 μg g(-1)). Furthermore, we investigated the question whether and how PAs from PA pollen are transferred from pollen into honey. We conducted model experiments with floral pollen of Senecio vernalis and PA free honey and tested the influence of the quantity of PA pollen, contact time and a simulated honey filtration on the final PA content of honey. It could clearly be demonstrated that the PA content of honey was directly proportional to the amount of PA pollen in honey and that the transfer of PAs from pollen to honey was a rather quick process. Consequently, PA pollen represents a major source for the observed PA content in honey. On the other hand, a good portion remains in the pollen. This fraction is not detected by the common analytical methods, but will be ingested, and it represents an unknown amount of 'hidden' PAs. In addition, the results showed that a technically and legally possible honey filtration (including the removal of all pollen) would not be an option to reduce the PA level of the final product significantly.     

Comparison between conjugated linoleic acid and essential fatty acids in preventing oxidative stress in bovine mammary epithelial cells

Some in vitro and in vivo studies have demonstrated protective effects of conjugated linoleic acid (CLA) isomers against oxidative stress and lipid peroxidation. However, only a few and conflicting studies have been conducted showing the antioxidant potential of essential fatty acids. The objectives of the study were to compare the effects of CLA to other essential fatty acids on the thiol redox status of bovine mammary epithelia cells (BME-UV1) and their protective role against oxidative damage on the mammary gland by an in vitro study. The BME-UV1 cells were treated with complete medium containing 50 μM of cis-9,trans-11 CLA, trans-10,cis-12 CLA, α-linolenic acid, γ-linolenic acid, and linoleic acid. To assess the cellular antioxidant response, glutathione, NADPH, and γ-glutamyl-cysteine ligase activity were measured 48 h after addition of fatty acids (FA). Intracellular reactive oxygen species and malondialdehyde production were also assessed in cells supplemented with FA. Reactive oxygen species production after 3 h of H₂O₂ exposure was assessed to evaluate and to compare the potential protection of different FA against H₂O₂-induced oxidative stress. All FA treatments induced an intracellular GSH increase, matched by high concentrations of NADPH and an increase of γ-glutamyl-cysteine ligase activity. Cells supplemented with FA showed a reduction in intracellular malondialdehyde levels. In particular, CLA isomers and linoleic acid supplementation showed a better antioxidant cellular response against oxidative damage induced by H₂O₂ compared with other FA.     

Emissions from sawdust in packed moving bed dryers and subsequent pellet production

This study quantifies emissions of hydrocarbon terpenes from the drying of sawdust in packed moving bed dryers, through the production chain to the finished pellets, and determines the parameters suitable for emission control. The terpene content in softwood sawdust and pellets was analyzed using gas chromatography. The distribution of VOC emissions over the bed was measured with a flame ionization detector. After drying, 30–40% of the initial terpenes remain in the wood, 20–30% remain after grinding, and 10–15% remain after pelleting. Dryer emissions correlate with residence time and final sawdust moisture content. Pellet press emissions correlate with pellet moisture content.     

Characteristics of wet‐spun and thermally treated poly acrylonitrile fibers

The performance of carbon fibers depends on the quality of the precursor and the conditions of the thermal treatment. In detail, for a PAN precursor fiber the viscosity of a spinning dope and the draw ratio during the spinning process needs to be considered. Through wet spinning, different types of PAN precursor fibers with defined spinning parameters, including solid content, solvent content in a bath, and especially draw ratio resulting in defined cross section diameters, were fabricated and analyzed with tensile tests, density investigations, SEM, TGA‐MS, FTIR, and XRD. The results show that the mechanical properties of the fibers correlate to crystallinity. The cross section diameter is strongly related to the morphology of the fibers after thermal treatment. By extending the postdrawing of PAN fibers high tenacities were obtained at the cost of the cross section shape. In addition, TGA measurements reveal trapped residues of the wet spinning process as well as show several chemical reactions takes place at the same time at different temperatures. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43698.