The Rise of Retinal Organoids for Vision Research

Retinal degenerative diseases lead to irreversible blindness. Decades of research into the cellular and molecular mechanisms of retinal diseases, using either animal models or human cell-derived 2D systems, facilitated the development of several therapeutic interventions. Recently, human stem cell-derived 3D retinal organoids have been developed. These self-organizing 3D organ systems have shown to recapitulate the in vivo human retinogenesis resulting in morphological and functionally similar retinal cell types in vitro. In less than a decade, retinal organoids have assisted in modeling several retinal diseases that were rather difficult to mimic in rodent models. Retinal organoids are also considered as a photoreceptor source for cell transplantation therapies to counteract blindness. Here, we highlight the development and field’s improvements of retinal organoids and discuss their application aspects as human disease models, pharmaceutical testbeds, and cell sources for transplantations.     

Tailoring the properties of deposited thin coating and print features in flexography by application of UV-ozone treatment

Printed functional materials are a rapidly growing area of interest for low-cost high-speed device manufacture with flexographic printing seen as a route to achieving this. The relationship between surface tension of the ink and surface free energy (SFE) of the photopolymer plate is a key for optimum performance. However, traditional methods of surface tension modification of the ink/coating often cannot be employed for functional inks. In this research, rapid, permanent modification of flexographic printing plate’s SFE is achieved through controlled UV-ozone treatment, and the effects of the treatment on the polar and dispersive component of SFE are analyzed by Fourier transform infrared attenuated total reflectance spectroscopy, swelling experiments, and roughness measurements. Printing trials using the modified printing plates reveal improved print uniformity and control of deposited ink layer thickness, as well as improved print features—particularly track and pad junctions which can be problematic for printed electronic applications. The ability to rapidly tailor printing plate SFE is of benefit to all volume printing applications. Furthermore, it is of critical importance for functional printing and printed electronics where surface tension of the ink is determined by the functional material and chemical modification is not possible or desirable.     

Synthesis and Crystal Structure Characterization of Oxysilicate Apatites for Stabilization of Sr and Rare‐Earth Elements

Strontium (Sr) containing rare‐earth oxysilicate apatite A^I₄A^II₆(SiO₄)₆O₂ is considered a good matrix to accommodate radionuclide as its cation sites can incorporate lanthanide elements other than Sr. Here, we report a study on the synthesis of Nd₈Sr₂(SiO₄)₆O₂ and Yb₈Sr₂(SiO₄)₆O₂, which adopt P6₃/m apatite symmetry, as well as the characterization of crystallographic structures using X‐ray diffraction and electron microscopy. It is found that A^I position is shared by Nd, Yb and Sr, and A^IO₆ polyhedra are face‐connected, forming column structures, which are linked to SiO₄ tetrahedra, creating continuous channels. The Rietveld refinement shows that Nd and Yb prefer the A^II position in the channel. The twisted angle of adjacent triangle faces in an A^I‐O polyhedron along [001] is a critical parameter to identify the channel volume and its value varies when different cations are incorporated. The twisted angles for Nd‐apatite and Yb are 24.2° and 22.7° The findings provide a new insight into nuclear waste stabilization by apatite‐type structure.     

Identification of potent human anti-IL-1RI antagonist antibodies

Interleukin-1 (IL-1) blockade by IL-1 receptor antagonist benefits some arthritis patients by reducing joint damage. This fact inspired us to develop antagonist human therapeutic antibodies against IL-1R(I) using phage libraries that display single-chain variable fragment (scFv) antibody fragments. Panning libraries against human IL-1R(I) generated 39 unique scFv-phage whose binding to IL-1R(I) was competed by IL-1 ligands. Fifteen of these scFv-phage, identified using IL-1R(I)-binding assays and dissociation rate ranking, were reformatted as scFv-Fc and IgG(4) molecules. The ease of producing antibodies in the scFv-Fc format permitted rapid identification of four lead clones (C10, C13, C14, C15) that inhibit NF-kappaB nuclear translocation induced by IL-1. Reformatting these clones as IgG(4) molecules increased their inhibition potency by 相似文献   

Dustiness Quantification of Powders by the Fractional Release Rate

The handling of dispersed solids may lead to undesirable release of dust particles. Size and quantity of the particles transferred into the gas with time depend on the binding and separating forces in the powder. These in turn are determined by characteristic parameters of the powder and of the process. Analogous to the well‐known “fractional collection efficiency” describing the dust separation, a newly defined “fractional release rate” to quantify the release of dust is introduced. The application is demonstrated by an example and the way to further development of this innovative approach is demonstrated.     

Direct ink writing of macroporous lead-free piezoelectric Ba0.85Ca0.15Zr0.1Ti0.9O3

Direct ink writing (DIW) has become a widespread additive manufacturing technique for material engineering, but its application in lead-free Ba_0.85Ca_0.15Zr_0.1Ti_0.9O₃ piezoelectric ceramics from aqueous systems has not been reported so far to our knowledge. The main obstacle is the high extent of hydrolysis reactions undergone by the starting powders when dispersed in water, hindering the attainment of stable water-based colloidal suspensions. This paper reports on the preparation of stable aqueous inks from a deagglomerated and surface-treated powder synthesized by solid-state reaction and on DIW of macroporous lead-free piezoelectrics. Based on zeta potential and rheological measurements, the optimal amounts of processing additives (dispersant, binder, and coagulating agent) were selected to transform the initial fluid suspension to a viscoelastic paste with sufficient stiffness and stability for the printing process. Dielectric and piezoelectric properties of samples sintered under different temperatures were also investigated.     

Growth and characterization of tetragonal bismuth ferrite–lead titanate thin films

Thin films of tetragonal bismuth ferrite–lead titanate (1 − x)BiFeO₃–xPbTiO₃ with x = 0.9–0.7 were prepared by pulsed laser deposition (PLD). The films exhibit a dense columnar grain growth. XRD analysis reveals that the films have a perovskite structure and exhibit a preferred (1 1 1) texture. The film microstructure was studied using SEM. The ferroelectric properties of the films are discussed in the light of polarization-field hysteresis behaviour and impedance spectroscopy. The remanent polarization values ranged between 2P_r  45 and 60 μC cm⁻² at a field amplitude of 500 kV cm⁻¹ and −10 °C, while the dielectric permittivity of the films ranged between 375 and 1096 at a frequency of 2 kHz.     

Homology Model Adjustment and Ligand Screening with a Pseudoreceptor of the Human Histamine H4 Receptor

A new pseudoreceptor modeling method (PRPS) was applied to the refinement of a homology model of the human histamine H₄ receptor (H₄R), the prediction of a ligand binding site, and virtual screening. Retrieval of two new H₄R ligands demonstrates the biological relevance of the pseudoreceptor model and provides a means for finding new hits and leads in the early phases of drug discovery.

     

Templated Pt-Sn electrocatalysts for ethanol, methanol and CO oxidation in alkaline media

In this work, we have investigated an aerosol-derived templated electrocatalyst for electro-oxidation of small organic molecules in alkaline media. Templated Pt-Sn electrocatalysts are compared to templated Pt catalysts both synthesized in an aerosol synthesis technique. In this synthesis approach, mono-disperse silica nanoparticles are used to template the metallic precursors. Structural and compositional analysis of the nanostructured materials are performed by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and BET surface area measurements. The aerosol-derived templated electrocatalysts are examined in conjunction with an anion exchange ionomer for ethanol, methanol and CO oxidation in alkaline media. The electrochemical studies include cyclic voltammetry, chronoamperometry and voltammetric adsorption of adsorbed CO.     

ISSN exercise & sport nutrition review: research & recommendations

Sports nutrition is a constantly evolving field with hundreds of research papers published annually. For this reason, keeping up to date with the literature is often difficult. This paper is a five year update of the sports nutrition review article published as the lead paper to launch the JISSN in 2004 and presents a well-referenced overview of the current state of the science related to how to optimize training and athletic performance through nutrition. More specifically, this paper provides an overview of: 1.) The definitional category of ergogenic aids and dietary supplements; 2.) How dietary supplements are legally regulated; 3.) How to evaluate the scientific merit of nutritional supplements; 4.) General nutritional strategies to optimize performance and enhance recovery; and, 5.) An overview of our current understanding of the ergogenic value of nutrition and dietary supplementation in regards to weight gain, weight loss, and performance enhancement. Our hope is that ISSN members and individuals interested in sports nutrition find this review useful in their daily practice and consultation with their clients.