Application of a Technofunctional Caseinate Hydrolysate to Replace Surfactants in Ice Cream

There is a demand for a clean label of ice cream in the food industry. To meet this requirement, alternative surfactants and hydrocolloids without an additive number have to be found. Here, a caseinate hydrolysate with improved interfacial properties was investigated as such an additive. Replacing only the surfactant resulted in ice cream characteristics, comparable to using a commercial emulsifier (INS 472b). Thus, a clean labeling of the surfactant using this hydrolysate is possible. By contrast, replacing the hydrocolloid additionally led to an unfavorable ice cream texture and stability.     

Simultaneous heat exchanger network synthesis for direct and indirect heat transfer inside and between processes

Process plants are typically divided into different process parts having specific processing tasks with possibly different ownership. Heat integration between these processes can increase the energy- and economic efficiency for both the overall plant and the individual processes. In this paper we present a heat exchanger network synthesis MINLP-model that allows simultaneous heat integration directly between streams in the same process and both directly and indirectly between streams in different processes. The indirect heat transfer is accomplished by using intermediate streams. Two examples, one small explanatory one and one from the literature, are optimized. The results verify that the model works logically.     

One Question,Multiple Answers: Biochemical and Biophysical Screening Methods Retrieve Deviating Fragment Hit Lists

Fragment‐based lead discovery is gaining momentum in drug development. Typically, a hierarchical cascade of several screening techniques is consulted to identify fragment hits which are then analyzed by crystallography. Because crystal structures with bound fragments are essential for the subsequent hit‐to‐lead‐to‐drug optimization, the screening process should distinguish reliably between binders and non‐binders. We therefore investigated whether different screening methods would reveal similar collections of putative binders. First we used a biochemical assay to identify fragments that bind to endothiapepsin, a surrogate for disease‐relevant aspartic proteases. In a comprehensive screening approach, we then evaluated our 361‐entry library by using a reporter‐displacement assay, saturation‐transfer difference NMR, native mass spectrometry, thermophoresis, and a thermal shift assay. While the combined results of these screening methods retrieve 10 of the 11 crystal structures originally predicted by the biochemical assay, the mutual overlap of individual hit lists is surprisingly low, highlighting that each technique operates on different biophysical principles and conditions.     

Characterization of piezoelectric ceramics using the burst/transient method with resonance and antiresonance analysis

In this paper, a comprehensive methodology for characterizing the high power resonance behavior of bulk piezoelectric ceramics using the burst method is described. In the burst method, the sample is electrically driven at its resonance frequency, and then either a short circuit or an open circuit condition is imposed, after which the vibration decays at the resonance or antiresonance frequency, respectively. This decay can be used to measure the quality factor in either of these conditions. The resulting current in the short circuit vibration condition is related to the vibration velocity through the “force factor.” The generated voltage in the open circuit vibration condition corresponds to the displacement by the “voltage factor.” The force factor and the voltage factor are related to material properties and physical dimensions of the sample. Using this method, the high power behavior of the permittivity, compliance, effective piezoelectric charge constant, electromechanical coupling factor, and material losses can be determined directly by measuring the resonance (short circuit) and antiresonance (open circuit) frequencies, their corresponding quality factors, the force factor A, and the voltage factor B. The experimental procedure to apply this method is described and demonstrated on commercially available hard and semi‐hard PZT materials of geometry.     

Production of Polyunsaturated Fatty Acids by Mortierella alpina Using Submerse and Solid State Fermentation

A new isolate of Mortierella alpina, > 98 % identical with M. alpina ATCC 16266, was cultivated in a defined glucose‐based medium with three organic nitrogen sources (glycine, urea and Na‐L‐glutamate) at three different concentrations in shaking flasks at 20 °C. The results were compared to the cultivation in complex medium with yeast extract as nitrogen source. In the defined media, high yields of polyunsaturated fatty acids (PUFAs) and arachidonic acid (ARA), respectively, were obtained with Na‐L‐glutamate. However, the absolute highest yields of PUFA and ARA were measured with the yeast extract medium. An optimized yeast extract complex medium was used for a submerse bioreactor cultivation in a 45‐L scale. Furthermore, M. alpina was cultivated in a solid state fermenter, using an oat bran water mixture as substrate.     

Potential and Limitations of Natural Chabazite for Selective Catalytic Reduction of NOx with NH3

The potential of the natural chabazite for the selective catalytic reduction (SCR) of NOx with NH₃ is evaluated in the present work. Activity tests were performed under technically relevant reaction and temperature conditions for the fresh and hydrothermally aged catalysts. The natural chabazite before and after alkaline removal as well as after iron and copper addition were compared. The structural as well as surface and bulk properties were elucidated by a variety of complementary characterization techniques, i.e. XRD, XPS, EPR, BET, NH₃‐TPD, ex situ and in situ XAS. The results indicate that an important facet for using the natural chabazite for the standard and fast SCR reactions is the removal of alkaline metals, which at the same time also leads to a partial change of the structure and the size of the iron‐containing particles. The performance and especially the hydrothermal stability can be further improved by copper addition.     

Replication of sub‐micron features using amorphous thermoplastics

A comprehensive experimental study was carried out to replicate sub‐micron features using the injection molding technique. For the experiments, five different plastic materials were selected according to their flow properties. The materials were polycarbonate (PC), styrene‐butadiene block copolymer (SBS), impact modified poly(methyl methacrylate), methyl methacrylate‐acrylonitrile‐butadiene‐styrene polymer (MABS), and cyclic olefin copolymer (COC). Nanofeatures down to 200‐nm line width and with aspect ratios (aspect ratio = depth/width) of 1:1 could be replicated. In all selected materials, the greatest differences between the materials emerged when the aspect ratio increased to 2:1. The most favorable results were obtained with the use of high flow polycarbonate as the molding material. The best replication results were achieved when melt and mold temperatures were higher than normal values.