SNR enhancement in radial SSFP imaging using partial k-space averaging

The steady-state free precessing (SSFP) sequences, widely used in MRI today, acquire data only during a short fraction of the repetition time (TR). Thus, they exhibit a poor scan efficiency. In this paper, a novel approach to extending the acquisition window for a given TR without considerably modifying the basic sequence is explored for radial SSFP sequences. The additional data are primarily employed to increase the signal-to-noise ratio, rather than to improve the temporal resolution of the imaging. The approach is analyzed regarding its effect on the image SNR (signal to noise ratio) and the reconstruction algorithm. Results are presented for phantom experiments and cardiac functions studies. The gain in SNR is most notable in rapid imaging, since SNR enhancement for a constant repetition time may be used to compensate for the increase in noise resulting from angular undersampling.     

Analytical model for the first and second moments of an adaptiveinterpolated FIR filter using the constrained filtered-X LMS algorithm

The authors present an analytical model for the mean weight behaviour and weight covariance matrix of an adaptive interpolated FIR filter using the LMS algorithm to adapt the filter weights. The particular structure of this adaptive filter determines that special analytical considerations must be used. First, the introduction of an interpolating block cascaded with the adaptive sparse filter requires that the input signal correlations must be considered. It is well known that such correlations are disregarded by the independence theory, which is the basis for the analysis of the LMS algorithm adapting FIR structures. Secondly a constrained analysis is used to deal mathematically with the sparse nature of the adaptive section. Experimental results demonstrate the effectiveness of the proposed analytical models as compared with the results obtained by classical analysis     

The Effects of Embedded Dipoles in Aromatic Self‐Assembled Monolayers

Using a representative model system, here electronic and structural properties of aromatic self‐assembled monolayers (SAMs) are described that contain an embedded, dipolar group. As polar unit, pyrimidine is used, with its orientation in the molecular backbone and, consequently, the direction of the embedded dipole moment being varied. The electronic and structural properties of these embedded‐dipole SAMs are thoroughly analyzed using a number of complementary characterization techniques combined with quantum‐mechanical modeling. It is shown that such mid‐chain‐substituted monolayers are highly interesting from both fundamental and application viewpoints, as the dipolar groups are found to induce a potential discontinuity inside the monolayer, electrostatically shifting the core‐level energies in the regions above and below the dipoles relative to one another. These SAMs also allow for tuning the substrate work function in a controlled manner independent of the docking chemistry and, most importantly, without modifying the SAM‐ambient interface.     

Bottom-contact small-molecule n-type organic field effect transistors achieved via simultaneous modification of electrode and dielectric surfaces

Low-voltage, n-type organic field effect transistors (OFETs) with simultaneously modified bottom-contact (BC) electrodes and dielectric were compared to their top-contact (TC) counterparts. The devices modified with 6-phenoxyhexylphosphonic acid (Ph6PA) self-assembled monolayer (SAM) showed similar performance, morphology, and contact resistance. Electron mobility of C₆₀ devices were 0.212 and 0.320 cm² V⁻¹ s⁻¹ and [6,6]-phenyl-C₆₁-butyric acid methyl ester (PCBM) devices were 0.04 and 0.06 cm² V⁻¹ s⁻¹ for TC and BC devices, respectively. Low contact resistance between 11 and 45 kΩ cm was found regardless of device architecture or n-type semiconductor used. This work shows it is possible to fabricate solution processable low-voltage bottom-contact devices with performance that is similar or better than their top-contact counterparts without the addition of complex and time-consuming processing steps.     

UNICORE 6 — Recent and Future Advancements

UNICORE is a European Grid Technology with more than 10 years of history. Originating from the Supercomputing domain, the latest version UNICORE 6 has turned into a general-purpose Grid technology that follows established standards and offers a rich set of features to its users. The paper starts with an architectural insight into UNICORE 6, highlighting the workflow features, standards and the different clients. Next, the current state of advancement is presented by describing recent developments. The paper closes with an outlook on future planned developments.     

低成本手机市场将取得爆炸式增长

目前,低成本手机数量不断增多,市场份额越来越大,比高端手机更受欢迎。研究表明,未来三年,低成本手机市场还将持续增长,这将是无线产业最主要的发展趋势之一,已经并将继续为无线手机制造商、服务供应商及芯片设计商带来金融、市场、战略和技术领域的重大变革与挑战。     

Modeling subjectively perceived annoyance of H.264/AVC video as a function of perceived artifact strength

This paper is concerned with the subjective perception of video coding artifacts in H.264/AVC encoded and decoded video. Our objective is to model the perceived annoyance of such low bit rate video sequences as a function of perceived artifact strength. We introduce a new method for determining this function and apply it to the data from two psychophysical experiments. Both experiments produced numerical judgments of the subjectively perceived annoyance of artifact combinations and the perceived strength of the respective coding artifacts. Our method produces a discrete multi-dimensional representation of the relationships in the data from which the function relating annoyance to artifact strength is derived. The method is applied to the data of the first experiment and the resulting function is shown to describe the data from the second experiment as well.     

Ferroelectric Poling of Methylammonium Lead Iodide Thin Films

Seemingly contradictory reports on polar domains and their origin have surrounded the controversial discussion about the ferroelectricity of the methyl ammonium lead iodide (MAPbI₃) thin films that are commonly employed in perovskite solar cells. In this work, microscopic modulations of the polar domain patterns upon application of an electric poling field are correlated with macroscopic changes to the currents through the MAPbI₃ layer. Piezoresponse force microscopy is used to monitor the widening, narrowing, generation or extinction of polar domains, as well as shifts of the domain walls at room temperature under an in‐plane electric poling field that is applied between two laterally organized electrodes. This poling leads to a net polarization of individual grains and the thin film itself. Macroscopically, this net polarization results in a persistent shift of the diode characteristics that is measured across the channel between the electrodes. Both the modulation of the polar domains upon electric poling and the concurrent persistent shift of the electric currents through the device are the unambiguous hallmarks of ferroelectricity, which demonstrate that MAPbI₃ is a ferroelectric semiconductor.     

MRI-compatible intensity-modulated force sensor for cardiac catheterization procedures

This paper presents a novel, magnetic resonance imaging (MRI)-compatible, force sensor suitable for cardiac catheterization procedures. The miniature, fiber-optic sensor is integrated with the tip of a catheter to allow the detection of interaction forces with the cardiac walls. The optical fiber light intensity is modulated when a force acting at the catheter tip deforms an elastic element, which, in turn, varies the distance between a reflector and the optical fiber. The tip sensor has an external diameter of 9 Fr (3?mm) and can be used during cardiac catheterization procedures. The sensor is able to measure forces in the range of 0-0.85?N, with relatively small hysteresis. A nonlinear method for calibration is used and real-time MRI in vivo experiments are carried out, to prove the feasibility of this low-cost sensor, enabling the detection of catheter-tip contact forces under dynamic conditions.