Multicriteria optimization as enabler for Sustainable Ceramic Matrix Composites

Over the past 40 years, development of Ceramic Matrix Composites (CMCs) has focused mainly on the improvement of material performance and optimization of cost-efficient production routes. Recently, more fields of application have opened up for CMCs, in which environmental impacts are relevant. These impacts have barely been investigated so far but receive growing interest due to increasing awareness of the environmental consequences. Our innovative approach frames material properties in relation to environmental impacts (e.g., global warming potential in CO₂ emission) by varying process parameters to balance optimum performance against environmental considerations. First, the process of wet filament winding has been investigated up to the Carbon Fiber Reinforced Plastic (CFRP) state by changing both the curing and tempering temperatures. During the production of CFRP plates, mass and energy flows were tracked in each step. Three point-bending and interlaminar shear tests have been performed on the resulting samples to identify basic mechanical properties. The environmental impacts are determined by a cradle-to-gate Life Cycle Assessment (LCA), using the software SimaPro. The resulting tradeoffs between mechanical properties and environmental impacts show nonlinear behavior, thus revealing optimum points above which improved mechanical properties are associated with significantly higher CO₂ emissions.     

Versuchsplanerische Untersuchung der Umesterung von Sojaöl mit Ethanol im Mikroreaktor

Base‐catalyzed transesterification of fats and oils with primary alcohols in discontinuous operation is an established batch process for the biodiesel production. However, the application of microreaction technology and continuous flow process lead to an increase of process intensification. The ethanol/soy bean oil ratio at low flow rates as well as the reactor geometry have the most evident effects on the fatty acid ethyl ester yield of KOH‐catalyzed ethanolysis of soy bean oil in microreactors. The influence of the catalyst concentration is of a lower importance.     

Identification and Structure–Activity Relationship Studies of Small‐Molecule Inhibitors of the Methyllysine Reader Protein Spindlin1

The methyllysine reader protein Spindlin1 has been implicated in the tumorigenesis of several types of cancer and may be an attractive novel therapeutic target. Small‐molecule inhibitors of Spindlin1 should be valuable as chemical probes as well as potential new therapeutics. We applied an iterative virtual screening campaign, encompassing structure‐ and ligand‐based approaches, to identify potential Spindlin1 inhibitors from databases of commercially available compounds. Our in silico studies coupled with in vitro testing were successful in identifying novel Spindlin1 inhibitors. Several 4‐aminoquinazoline and quinazolinethione derivatives were among the active hit compounds, which indicated that these scaffolds represent promising lead structures for the development of Spindlin1 inhibitors. Subsequent lead optimization studies were hence carried out, and numerous derivatives of both lead scaffolds were synthesized. This resulted in the discovery of novel inhibitors of Spindlin1 and helped explore the structure–activity relationships of these inhibitor series.     

N-methyl-2-hydroxyethylammonium oleate ionic liquid performance as corrosion inhibitor for mild steel in hydrochloric acid medium

The aim of the present study is to evaluate the performance of N-methyl-2-hydroxyethylammonium oleate ([m-2HEA][Ol]) as a corrosion inhibitor for mild steel in a 0.1-mol/L hydrochloric acid solution and also investigate the role of chloride in the inhibition mechanism. This protic ionic liquid (PIL) has formerly shown a high efficiency as a corrosion inhibitor in a neutral chloride medium. Electrochemical and weight loss measurements, surface contact angle determination, scanning electron microscopy, and Raman spectroscopy were used to understand the factors that influence the response of the studied inhibitor. Results revealed that [m-2HEA][Ol] behaves as a mixed-type adsorption inhibitor, by blocking cathodic sites and by modifying the activation energy of the anodic reaction, and it can reach up to 94–97% of inhibition efficiency. PIL adsorption was enhanced by the excess of positive charge of the mild steel. The effect of inhibitor molecule has been discussed to propose a mechanism that explains the inhibitory action of the corrosion inhibitor, pointing out the role of chloride in the inhibition mechanism.     

Effects of Weight Loss on Lipid Transfer Proteins in Morbidly Obese Women

Obesity is associated with lipid abnormalities leading to an increased morbidity and mortality from atherosclerotic disease. Lipid transfer proteins such as Cholesteryl Ester Transfer Protein (CETP) and Phospholipid Transfer Protein (PLTP), and lipases such as lipoprotein lipase (LPL) and hepatic lipase (HL) are involved in the pathogenesis of the obesity associated proatherogenic dyslipidemia. Nineteen severely obese female subjects undergoing laparosopic gastric banding participated in this prospective study. Subjects were examined with respect to body composition, lipid profile, CETP, PLTP, LPL and HL before and 1 year after surgical treatment. Mean weight loss was 22.2 kg, mainly due to losses in the fat depots. Triglycerides decreased and HDL₂-C increased significantly. In respect to transfer proteins mean CETP mass decreased from 1.82 to 1.71 μg mL^?1 (P = 0.043) and mean PLTP activity was reduced from 7.15 to 6.12 μmol mL^?1 h^?1 (P = 0.002), in parallel. In addition, both mean LPL activity and mean HL activity tended to decrease from 297 to 248 nmol mL^?1 h^?1 for LPL (P = 0.139) and from 371 to 319 nmol mL^?1 h^?1 for HL (P = 0.170), respectively. We conclude that weight loss induced by bariatric surgery is associated with the amelioration of the obesity-associated dyslipidemic state. This improvement may be attributable to decreased mass and action of the adipocyte tissue derived lipid transfer proteins CETP and PLTP.     

Observing Proteins as Single Molecules Encapsulated in Surface‐Tethered Polymeric Nanocontainers

Protein unfolding inside immobilized polymerosomes : One of the most interesting properties of polymeric vesicles is their remarkable stability against extreme temperatures and osmotic stress, and their longevity even under harsh environmental conditions. We have demonstrated, in an application on protein folding, that surface‐tethered polymerosomes are suitable for performing time‐resolved single molecule studies with encapsulated proteins, as illustrated here.

     

The reaction of NiO/NiAl2O4 particles with alternating methane and oxygen

The reduction and oxidation behaviour of oxygen carrier particles of NiO and NiAl₂O₄ has been investigated in a fluidized bed reactor as well as a thermogravimetric analyzer (TGA). The particles showed high reactivity and gas yield to CO₂ with methane in the temperature interval 750–950°C. In the fluidized bed the yield to CO₂ was between 90 and 99% using bed masses corresponding to 16–57 kg/MW_fuel. Complementary experiments in a TGA at 750 and 950°C showed a clear reaction of the NiAl₂O₄ with CH₄ at the higher temperature. There was methane released from the reactor at high degrees of solid oxidation, which is likely associated with the lack of Ni‐sites on the particles which can reform the methane. There was some carbon formation during the reduction, although the amount was minor when the gas yield to carbon dioxide and degree of oxidation of the solid was high. A simple reactor model using kinetic data from a previous study predicted the gas yield during the reduction in the fluidized bed experiments with reasonable accuracy. The oxygen carrier system investigated in this work shows high promise for use in a real CLC system, provided that the particle manufacturing process can be scaled up with reasonable cost.     

H2 rich syngas by selective CO2 removal from biomass gasification in a dual fluidized bed system — Process modelling approach

A process model of dual fluidized bed gasification is presented based on mass- and energy balances. The model further covers the evaluation of thermodynamic equilibrium states. The gasification is investigated for the special case that CaO/CaCO₃ is used as bed material allowing selective transport of CO₂ from the gasification reactor to the combustion reactor by repeated carbonation and calcination. Experimental data are used to determine the model parameters. An empirical approach towards the kinetics of fuel conversion allows prediction of process behaviour at varied fuel water content. The selective transport of CO₂ results in high H₂ contents in the produced syngas. The lower operating temperatures in the gasification reactor increase the efficiency of energy conversion. The results are in agreement with experimental data and show the thermodynamic limitations of the technology.     

Square Foot Manufacturing: a new production concept for micro manufacturing

Today a large number of microstructures are already employed as separate components or as constituents of larger modules in a broad spectrum of production in medical technology, optics, biotechnology, mechatronics, fluidics, (micro)-forming and tool construction. Current research activities are directed towards the downscaling of manufacturing procedures or the formation of complex process chains for the manufacture of micro workpieces. The Square Foot Manufacturing concept represents one approach aimed at achieving significant technical, economic and ecological developments in the production of microstructures by means of machining techniques that can be applied to a spectrum of materials as broad as possible. This fabrication concept representing a refinement of existing desktop manufacturing concepts is currently being developed at the Institute of Production Engineering of Helmut-Schmidt-University/University of the Federal Armed Forces Hamburg. This paper is intended to provide an overview of the theoretical concept and the current state of its technical implementation.     

Trypsiligase-Catalyzed Labeling of Proteins on Living Cells

Fluorescent fusion proteins are powerful tools for studying biological processes in living cells, but universal application is limited due to the voluminous size of those tags, which might have an impact on the folding, localization or even the biological function of the target protein. The designed biocatalyst trypsiligase enables site-directed linkage of small-sized fluorescence dyes on the N terminus of integral target proteins located in the outer membrane of living cells through a stable native peptide bond. The function of the approach was tested by using the examples of covalent derivatization of the transmembrane proteins CD147 as well as the EGF receptor, both presented on human HeLa cells. Specific trypsiligase recognition of the site of linkage was mediated by the dipeptide sequence Arg-His added to the proteins’ native N termini, pointing outside the cell membrane. The labeling procedure takes only about 5 minutes, as demonstrated for couplings of the fluorescence dye tetramethyl rhodamine and the affinity label biotin as well.