A translinear principle based low-power high-precision RMS-to-DC converter in CMOS technology

Analog Integrated Circuits and Signal Processing - In the present study, a low-power high-precision current-mode CMOS true root mean square (RMS)-to-DC converter is presented based on the...     

Surface and structure characteristics of commercial K-Feldspar powders: Effects of temperature and leaching media

This study presents morphological and structural variations of K-Feldspar mineral after acid treatment. Both organic and inorganic acids such as C₂H₂O₄, HCl, HNO₃ and H₂SO₄ were employed for this purpose. Another aim of this study was to find an optimum experimental condition for iron (Fe) removal with a minimum damage on the structure of K-Feldspar in which high whiteness index is obtained. The effect of different parameters such as concentration, pH and temperature on the final structure of this mineral was investigated. To find out the chemical composition of powder, XRF was utilized. FTIR, XRD and SEM were employed to study the structure of mineral. Spectrophotometry was chosen to analyze whiteness index of powder after acid treatment. It was found that O—Al—O bond at 647 cm^-1 for H₂SO₄ and HNO₃ treated sample disappeared. However, HCl and C₂H₂O₄ were ineffective at this band. In addition, the results revealed an increase in K-Feldspar content, a decrease in Fe content, an increase in whiteness index and no significant structural change for C₂H₂O₄ leached sample. Whiteness index of 91% was obtained for C₂H₂O₄ leached sample with the pH of 2.5 to 3 at temperature of 50℃ and during 1 h.     

Semi fractal three leaf clover‐shaped CPW antenna for triple band operation

This article presents a unique and compact coplanar waveguide (CPW) antenna that exhibits triband operation with circular polarization. The single antenna was designed to operate simultaneously in the following bands: WiMAX (3.3–3.6 GHz), wireless local area network (WLAN) (5.15–5.825 GHz), ITS (5.795–6.400 GHz), and ITU‐R (7.725–8.5 GHz). The realization of the triband antenna was achieved by using two semi fractal ring patches resembling the shape of a three leaf clover, and by introducing a pair of symmetrical L‐shaped slits in its ground plane. The antenna's physical parameters were investigated to fully understand their affect on the antenna's performance. The salient parameters obtained from this analysis enabled the optimization of the antenna's overall characteristics. The design concept was confirmed by fabricating the antenna prototype and measuring its characteristics. The proposed antenna has dimensions of 20 × 20 × 1 mm³. Measured results show the antenna exhibits circular polarization in WiMAX and ITU‐R bands, and linear polarization in the WLAN band. The antenna radiates omnidirectionally in the H‐plane, and approximately bidirectionally in the E‐plane. In addition, the antenna presents stable gain over the triband. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:413–418, 2015.     

A modified directed search domain algorithm for multiobjective engineering and design optimization

Multiobjective optimization is one of the key challenges in engineering design process. Since the answer to such problem is not unique, a set of evenly distributed solutions is particularly important for a designer. The Directed Search Domain (DSD) method is a numerical optimization approach that has proven to be efficient enough to tackle such optimization problems. In this paper, we propose two modifications to the DSD approach which make the solution algorithm simpler for program implementation. These modifications are related to the control of the search domain and reformulation of the appropriate single objective optimization problem. As a result, the computational efficiency of the method is increased due to the lower number of objective function evaluations. The capabilities of the new approach are demonstrated on a set of test cases.     

Image compressed sensing recovery via nonconvex garrote regularization

Multimedia Tools and Applications - Sparsity inducing model is one of the most important components of image compressed sensing (CS) recovery methods. These models are built on the image prior...     

Impact of Artificial Compressibility on the Numerical Solution of Incompressible Nanofluid Flow

The numerical solution of compressible flows has become more prevalent than that of incompressible flows. With the help of the artificial compressibility approach, incompressible flows can be solved numerically using the same methods as compressible ones. The artificial compressibility scheme is thus widely used to numerically solve incompressible Navier-Stokes equations. Any numerical method highly depends on its accuracy and speed of convergence. Although the artificial compressibility approach is utilized in several numerical simulations, the effect of the compressibility factor on the accuracy of results and convergence speed has not been investigated for nanofluid flows in previous studies. Therefore, this paper assesses the effect of this factor on the convergence speed and accuracy of results for various types of thermo-flow. To improve the stability and convergence speed of time discretizations, the fifth-order Runge-Kutta method is applied. A computer program has been written in FORTRAN to solve the discretized equations in different Reynolds and Grashof numbers for various grids. The results demonstrate that the artificial compressibility factor has a noticeable effect on the accuracy and convergence rate of the simulation. The optimum artificial compressibility is found to be between 1 and 5. These findings can be utilized to enhance the performance of commercial numerical simulation tools, including ANSYS and COMSOL.     

A single-stage operational amplifier with enhanced transconductance and slew rate for switched-capacitor circuits

The DVB-T2 standard for digital terrestrial broadcasting supports the use of quadrature amplitude modulation constellations where the constellation points are rotated in the I–Q plane. This combined with a cyclic delay of the Q component provides improved performance in some fading channels. The complexity of the optimal demapping process for rotated constellations is however significantly higher than for non-rotated constellations. This makes the DVB-T2 demapper one of the most computationally complex parts of a receiver. In this article, we examine possible simplifications of the demapping process suitable for implementation on a general purpose computer containing a modern graphics processing unit (GPU). Furthermore, we measure the performance in terms of throughput, as well as accuracy, of the implemented algorithms. The implementations are designed to interface efficiently to a previously implemented real-time capable GPU-based low-density parity-check channel decoder.     

Experiments on conical shell reducers under uniform external pressure

In previous studies, a proliferation of research work has been undertaken on the buckling behavior of shell structures particularly conical shells. Nonetheless, no experimental studies are found in the literature on the buckling of a full and real configured model of a slender shell reducer with two cylindrical end boundaries. To this end, buckling behavior of three conical shell reducers under uniform peripheral pressure was investigated and evaluated experimentally in this paper. In addition, relevant FE simulations as well as theoretical predictions were taken into account to compare buckling load and modes of deformation. Derived results were aimed at generalizing the data for conical reducers in full scale within the range of this study.     

Effects of Welding and rotational speeds on the Microstructure and Hardness of Friction Stir Welded Single-Phase Brass

This study focuses on the effects of rotational and welding speeds on the microstructure and hardness of joints in friction stir welded single-phase brass. Welds were achieved under low heat input conditions at rotational and welding speeds of 400-800 r/min and 100-300 mm/min, respectively. In order to characterize the obtained welds, optical microscopy and Vickers hardness measurements were taken on the weld cross sections. According to the obtained results, increasing the welding speed and/or decreasing the rotational speed caused the grain size of the stir zone to decrease and, hence, improved the average hardness of this region. These results are discussed with respect to the interplay between the welding parameters and the peak temperature in the weld thermal cycle.     

An Omniphobic Spray Coating Created from Hierarchical Structures Prevents the Contamination of High-Touch Surfaces with Pathogens

Engineered surfaces that repel pathogens are of great interest due to their role in mitigating the spread of infectious diseases. A robust, universal, and scalable omniphobic spray coating with excellent repellency against water, oil, and pathogens is presented. The coating is substrate-independent and relies on hierarchically structured polydimethylsiloxane (PDMS) microparticles, decorated with gold nanoparticles (AuNPs). Wettability studies reveal the relationship between surface texturing of micro- and/or nano-hierarchical structures and the omniphobicity of the coating. Studies of pathogen transfer with bacteria and viruses reveal that an uncoated contaminated glove transfers pathogens to >50 subsequent surfaces, while a coated glove picks up 10⁴ (over 99.99%) less pathogens upon first contact and transfers zero pathogens after the second touch. The developed coating also provides excellent stability under harsh conditions. The remarkable anti-pathogen properties of this surface combined with its ease of implementation, substantiate its use for the prevention of surface-mediated transmission of pathogens.