A Silicon Plasma-Based Wideband Modulator

Theoretical and experimental analysis has been performed for surface oriented silicon plasma-based p,i,n structures used to control high power level, broadband devices. It is shown that these structures are very promising for their use as modulators in the millimeter and submillimeter wave range.     

Nanoindentation as a strength probe—a study on the hardness dependence of indent size for fine-grained and coarse-grained ferritic steel

A nanoindentation hardness testing system, including an atomic-force microscope (AFM)-based nanoindentation tester and a calibration method using electrolytically polished single-crystal metals as references, was proposed. This was applied to a study of the mechanical properties of fine-grained ferritic steel (grain size of 1.2 μm) and coarse-grained ferritic steel (30 μm). An empirical function giving the macroscopic hardness for all four reference metals from the nanoindentation force curves was established. The converted Vickers hardness (HV*) of the coarse-grained steel is almost independent of the indent size. The fine-grained steel shows only HV* 130 with an indent of only 100 nm, compared with a macroscopic hardness of HV 210. The difference, HV 80, is considered to reflect the amount of grain-boundary strengthening. The critical indent size for the hardness transition seems to be around 1 μm, comparable to the grain size of the specimen. This result supports the explanation of grainboundary strengthening. It is also consistent with Pickering’s work on low-carbon steel, as the estimated locking parameter (k of 2.6×10⁵ N/m^3/2) in the Hall-Petch relationship is in good agreement with his value of 2.4×10⁵ N/m^3/2.     

Temperature Estimation and Al Content Prediction Focusing on Microstructural Change in a Thermal Barrier Coating

A superalloy with a thermal barrier coating (TBC) simulating a gas turbine blade is exposed to a high-temperature environment to develop a method for predicting the local temperature and Al content in a bond coat (BC). The Al content decreases with an increase in the test time due to the Al transport induced by the oxidation of the BC and the interdiffusion between the BC and the substrate. This brings about Al-decreased layer (ADL) at the boundary between the BC and the top coat. The thickness of the ADL increases in proportion to the square root of the test time, and the temperature dependence of the growth rate shows an Arrhenius-type behavior. Based on this relation, the local temperature of an in-service blade can be estimated by measuring the ADL thickness when the operation time is known. The Al content decreases in proportion to the ADL thickness. The prediction method of the Al content based on the relation is also presented.     

Filter-embedded design and its applications to passive components

A design in which a filter is embedded in a fiber fixed on a substrate is proposed. It was successfully applied to the fabrication of low loss fiber optic components for a single-mode fiber transmission system. These components have a wide operational temperature range. The design is easily adapted to a multifilter or multifiber component. Filter embedding is achieved in two ways. One is to insert a thin filter chip in a slit which is machined into a fiber fixed on a substrate by a dicing saw (filter inserted type). The other is to evaporate a filter film directly on a fiber end face and butt this fiber to another fiber on a guide groove on a substrate (filter evaporated type)     

Development of multianode photomultiplier tube

We have developed a multianode photomultiplier tube (MAPMT) which has a sensitive cathode diameter of 36 mm and an anode with 88 segments. The position sensitivity of the tube was studied by using light from a LED and scintillation light from a scintillation-fiber bundle. We observed particle tracks for the first time by using a single photomultiplier tube.     

Modified thermoelectric figure of merit estimated from enhanced mobility of [100] oriented beta-FeSi<Subscript>2</Subscript> thin film

The modification of thermoelectric figure of merit was estimated from enhanced mobility of [100] oriented beta-FeSi₂ film. beta-FeSi₂ on Si(001) substrate was prepared by molecular beam epitaxy method using an Fe source. The crystallographic orientation of beta-FeSi₂ film on Si(001) substrate was characterized by using X-ray diffraction. Using scanning electron microscopy, surface morphology and film thickness of samples were observed and estimated, respectively. The mobility of beta-FeS₂ film on Si(001) substrate were also characterized by Hall measurement at room temperature. A part of the enhancement of figure of merit was evaluated as the functions of mobility and crystallographic orientation of samples.     

Insulation performance of pressurized liquid helium underquench-induced thermal bubble disturbance for superconducting powerapparatus

We have been studying quench-induced `dynamic' breakdown characteristics of LHe and have already found that the electrical insulation performance of LHe was degraded drastically by the thermal bubble disturbance due to quench of superconductors. In this paper, in order to improve the insulation performance of LHe under quench conditions, we measured dynamic breakdown and prebreakdown characteristics of pressurized LHe. Experimental results revealed that breakdown voltage of LHe under quench conditions at 0.2 MPa was greatly improved, reaching 2 to 4× compared with that at atmospheric pressure under both uniform and non-uniform electric fields. Moreover, for practical and efficient insulation design of superconducting power apparatus, we investigated the dynamic breakdown voltage of LHe as functions of pressure and gap length