Simple and comprehensive two-dimensional reversed-phase HPLC using monolithic silica columns

Simple and comprehensive two-dimensional (2D)-HPLC was studied in a reversed-phase mode using monolithic silica columns for second-dimension (2nd-D) separation. Every fraction from the first column, 15 cm long (4.6-mm i.d.), packed with fluoroalkylsilyl-bonded (FR) silica particles, was subjected to the separation in the 2nd-D using one or two octadecylsilylated (C(18)) monolithic silica columns (4.6-mm i.d., 3 cm). Monolithic silica columns in the 2nd-D were eluted at a flow rate of up to 10 mL/min with separation time of 30 s that meets the fractionation every 15-30 s at the first dimension (1st-D) operated at a flow rate of 0.4-0.8 mL/min. Three cases were studied. (1) In the simplest scheme of 2D-HPLC, effluent of the 1st-D was directly loaded into an injector loop of 2nd-D HPLC for 28 s, and 2 s was allowed for injection. (2) Two six-port valves each having a sample loop were used to hold the effluent of the 1st-D alternately for 30 s for one 2nd-D column to effect comprehensive 2D-HPLC without the loss of 1st-D effluent. (3) Two monolithic silica columns were used for 2nd-D by using a switching valve and two sets of 2nd-D chromatographs separating each fraction of the 1st-D effluent with the two 2nd-D columns alternately. In this case, two columns of the same stationary phase (C(18)) or different phases, C(18) and (pentabromobenzyloxy)propylsilyl-bonded (PBB), could be employed at the 2nd-D, although the latter needed two complementary runs. The systems produced peak capacity of approximately 1000 in approximately 60 min in cases 1 and 2 and in approximately 30 min in case 3. The three stationary phases, FR, C(18), and PBB, showed widely different selectivity from each other, making 2D separations possible. The simple and comprehensive 2D-HPLC utilizes the stability and high efficiency at high linear velocities of monolithic silica columns.     

Purification and characterization of an extracellular beta-agarase from Bacillus sp. MK03

A new beta-agarase was purified from an agarolytic bacterium, Bacillus sp. MK03. The enzyme was purified 129-fold from the culture supernatant by ammonium sulfate precipitation, anion exchange and gel filtration column chromatographic methods. The purified enzyme appeared as a single band on sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). Estimation of the molecular mass by SDS-PAGE and gel filtration gave values of 92 kDa and 113 kDa, respectively. The N-terminal amino acid sequence of the enzyme showed no homology to those of other known agarases. The optimum pH and temperature for this enzyme were 7.6 and 40 degrees C, respectively. The predominant hydrolysis product of agarose by this enzyme was neoagarotetraose, indicating the cleavage of beta-1,4 linkage. This enzyme could hydrolyze neoagarohexaose to produce neoagarotetraose and neoagarobiose; it could not hydrolyze these products. The enzyme digested agarose by endo-type hydrolysis.     

Comparative study of depth and lateral distributions of electron excitation between scanning ion and scanning electron microscopes

In order to study the contrast difference between scanning ion microscopes (SIM) and scanning electron microscopes (SEM), the depth and lateral distributions of secondary electrons escaped from surfaces of 17 metals with atomic numbers, Z2, of 4-79 were calculated for bombardment with 30 keV Ga ions and for 10 keV electrons. For both projectiles, the excitation depth generally decreased with increasing Z2, while showing the same periodic change as the secondary-electron yield. However, an opposite trend in Z2 dependence between the Ga ion and electron bombardments was calculated with the lateral distribution of secondary electrons escaped from the surface. Except for low Z2 metals, the lateral distribution, which is much narrower for 30 keV Ga ions than for 10 keV electrons, indicates that the spatial resolution of the secondary-electron images is better for SIM than for SEM, if zero-sized probe beams are assumed. Furthermore, the present calculation reveals important effects of electron excitation by recoiled material atoms and reflected electrons on the lateral distribution, as well as the secondary-electron yield, for the Ga ion and electron bombardments, respectively.     

Grazing exit electron probe microanalysis of submicrometer inclusions in metallic materials

Grazing exit electron probe microanalysis (GE-EPMA) is a new method of EPMA in which characteristic X-rays emitted from only near-surface regions of a specimen are detected at extremely low exit angles near 0 degrees (the grazing exit condition). This technique requires the analytical objects exist on a flat surface. Therefore, the GE-EPMA analysis has been used only for the analysis of particles or a thin film on a flat substrate so that there were only few applications for practical analysis. As a new application, we have carried out GE-EPMA analysis of approximately 0.2-microm inclusions on stainless steel, which appeared to be a projection on the specimen surface with chemical etching. The GE-EPMA quantitative results were in excellent agreement with those of inclusions that were extracted from the stainless steel and analyzed by EPMA with conventional exit condition (30 degrees). This method could be, therefore, applied to the analysis of the submicrometer inclusion in a wide variety of metallic materials if the inclusion appears to be a projection with chemical etching treatment.     

Computer-aided design of a factor Xa inhibitor by using MCSS functionality maps and a CAVEAT linker search

We have investigated a new approach to efficiently find a novel inhibitor against a serine protease (i.e. an activated coagulation factor X, FXa) by using de novo design programs and the X-ray crystal structure of the target enzyme. FXa is a coagulant enzyme that generates thrombin (a serine protease) and participates in both intrinsic and extrinsic coagulation pathways. We adopted multiple copy simultaneous search (MCSS) and CAVEAT linker search techniques, which disclosed a novel FXa inhibitor (T01312) consisting of two binding moieties (the benzamidinyl and adamantyl groups) and a linker unit (the carboxybenzylamine group). The inhibitory activity of T01312 against FXa was determined to be a small K(i)-value of 48nM, which is two orders of magnitude smaller than that against thrombin. An X-ray crystal analysis of T01312 complexed with trypsin (an analogue of FXa) and docking studies of T01312 with trypsin and FXa showed that: (i) the benzamidinyl group is a predominant binding moiety in the anionic pocket (S1 site) with an asparatic acid residue; (ii) a hydrophobic pocket (S4 site) is the binding site of the adamantyl group; (iii) the carboxylate group of the linker contributes to the selectivity for FXa against thrombin. Thus, the combination of the knowledge of the X-ray crystal structure of the target molecule with MCSS and CAVEAT linker search techniques proved to be an effective hit-finding method that does not require the screening of huge compound libraries.     

Determination of nitroarenes in precipitation collected in Kanazawa, Japan

Eight nitroarenes, 1,3-, 1,6- and 1,8-dinitropyrenes, 1-, 2- and 4-nitropyrenes, 6-nitrochrysene and 2-nitrofluoranthene, in precipitation collected in Kanazawa were determined. The nitroarenes in the precipitation were concentrated onto solid phase extraction cartridges, and identified with high-performance liquid chromatography with chemiluminescence detection. The nitroarene concentrations in the precipitation were in the range 0.016-15 pmol/L, and the nitroarene composition tended to be the same as that in airborne particulates. 1-Nitropyrene in river water and seawater were also determined. 1-nitropyrene concentrations on the days after rain (19-110 fmol/L) were higher than those on the days before rain (4,11 fmol/L). Moreover, 1-nitropyrene concentrations in the river water were much lower than those in the precipitation, but were higher than those in the seawater. These results suggested that the nitroarenes in the precipitation and the river water came from airborne particulates.     

A new algorithm for packet routing problems using chaotic neurodynamics and its surrogate analysis

We propose a new algorithm for routing packets which effectively avoids packet congestion in computer networks. The algorithm involves chaotic neurodynamics. To realize effective packet routing, we first composed a basic method by a neural network, which routes packets with shortest path information between two nodes in the computer network. When the computer network has an irregular topology, the basic routing method does not work well, because most of packets cannot be transmitted to their destinations due to packet congestion in the computer network. To avoid such an undesirable problem, we employed chaotic neurodynamics to extend the basic method. Numerical experiments show that our proposed method exhibits good performance for scale-free networks. We also analyze why the proposed routing method is effective, comparing the proposed method with several stochastic methods. We introduced the method of surrogate data, a statistical hypothesis testing which is often used in the field of nonlinear time-series analysis. Analysis of the proposed method by the method of surrogate data reveals that the chaotic neurodynamics is most effective to decentralize the packet congestion in the computer network.     

DIRECT ADAPTIVE CONTROL FOR NONLINEAR MATRIX SECOND‐ORDER SYSTEMS WITH TIME‐VARYING AND SIGN‐INDEFINITE DAMPING AND STIFFNESS OPERATORS

A direct adaptive control framework for a class of nonlinear matrix second‐order systems with time‐varying and sign‐indefinite damping and stiffness operators is developed. The proposed framework guarantees global asymptotic stability of the closed‐loop system states associated with the plant dynamics without requiring any knowledge of the system nonlinearities other than the assumption that they are continuous and bounded. The proposed adaptive control approach is used to design adaptive controllers for suppressing thermoacoustic oscillations in combustion chambers.     

Breakdown Characteristics of N2O Gas Mixtures for Quasiuniform Electric Field under Lightning Impulse Voltage

From the viewpoint of mitigating global warming by SF₆ gas, this paper discusses breakdown (BD) characteristics of different electronegative gas mixtures with N₂O gas as SF₆ gas substitutes for quasi-uniform electric field under lightning impulse voltage applications. Experimental results revealed the positive synergism in breakdown strength of binary N₂O / CO₂ and ternary N₂O / CO₂ / O₂ gas mixtures, respectively. Furthermore, N₂ gas as a retardant gas was also mixed with the electronegative gas mixtures in order to reduce the electron energy into the effective levels of electron attachment ability by the electronegative gas mixtures. As the result, ternary N₂O / CO₂ / N₂ and quaternary N₂O / CO₂ / O₂ / N₂ gas mixtures could exhibit the significant synergistic effect in breakdown strength. The optimum mixture rate of quaternary N₂O / CO₂ / O₂ / N₂ gas mixtures was consistent with that estimated by assuming the independent contribution of component gases to the improvement of impulse BD characteristics.