Inverse modelling of an aneurysm’s stiffness using surrogate-based optimization and fluid-structure interaction simulations

Characterization of the mechanical properties of arterial tissues is highly relevant. In this work, we apply an inverse modelling approach to a model accounting for an aneurysm and the distal part of the circulation which can be modified using two independent stiffness parameters. For given values of these parameters, the position of the arterial wall as a function of time is calculated using a forward simulation which takes the fluid-structure interaction (FSI) into account. Using this forward simulation, the correct values of the stiffness parameters are obtained by minimizing a cost function, which is defined as the difference between the forward simulation and a measurement. The minimization is performed by means of surrogate-based optimization using a Kriging model combined with the expected improvement infill criterion. The results show that the stiffness parameters converge to the correct values, both for a zero-dimensional and for a three-dimensional model of the aneurysm.     

Development of an experimentally validated semi-empirical fully-coupled performance model of a PEM electrolysis cell with a 3-D structured porous transport layer

A semi-empirical non-isothermal model incorporating coupled momentum, heat and mass transport phenomena for predicting the performance of a proton exchange membrane (PEM) water electrolysis cell operating without flow channels is presented. Model input parameters such as electro-kinetics properties and mean pore size of the porous transport layer (PTL) were determined by rotating disc electrode and capillary flow porometry, respectively. This is the first report of a semi-empirical fully coupled model which allows one to quantify and investigate the effect of the gas phase and bubble coverage on PEM cell performance up to very high current densities of about 5 A/cm². The mass transport effects are discussed in terms of the operating conditions, design parameters and the microstructure of the PTL. The results show that, the operating temperature and pressure, and the inlet water flowrate and thickness of the PTL are the critical parameters for mitigating mass transport limitation at high current densities. The model presented here can serve as a tool for further development and scale-up effort in the area of PEM water electrolysis, and provide insight during the design stage.     

Different combinations of salts affect the growth and bacteriocin production by Lactobacillus salivarius CRL 1328

BACKGROUND: The culture medium for optimal growth of vaginal Lactobacillus salivarius CRL 1328 is different from that for optimal bacteriocin production. To simultaneously obtain high amount of biomass and bacteriocin of this microorganism, the effects of different basal culture media and salts on both responses were evaluated. The study was performed by using a complete factorial experimental design 2⁶, with central points. Sixty‐four different growth media, which resulted from the combinations of two basal culture media and two concentrations of five salts (ammonium citrate, sodium acetate, MgSO₄, MnSO₄, and K₂HPO₄) were assayed. RESULTS: Only the addition of MnSO₄ to each culture medium significantly stimulated the growth of L. salivarius. The presence of sodium acetate or MgSO₄ stimulated the bacteriocin production, while MnSO₄ and K₂HPO₄ exerted an inhibitory effect. However, the simultaneous addition of MnSO₄ and sodium acetate to both basal culture media allowed high bacteriocin levels to be reached, attenuating the inhibitory effect of Mn²⁺. CONCLUSIONS: The application of a complete experimental design contributed to simultaneous optimization of the biomass and bacteriocin production of L. salivarius CRL 1328. The results obtained are potentially applicable to the technological production of probiotic bacteria and antagonistic substance to be included in a probiotic pharmaceutical product. Copyright © 2009 Society of Chemical Industry     

Effect of pasture versus indoor feeding systems on quality characteristics,nutritional composition,and sensory and volatile properties of full-fat Cheddar cheese

The purpose of this study was to investigate the effects of pasture-based versus indoor total mixed ration (TMR) feeding systems on the chemical composition, quality characteristics, and sensory properties of full-fat Cheddar cheeses. Fifty-four multiparous and primiparous Friesian cows were divided into 3 groups (n = 18) for an entire lactation. Group 1 was housed indoors and fed a TMR diet of grass silage, maize silage, and concentrates; group 2 was maintained outdoors on perennial ryegrass only pasture (GRS); and group 3 was maintained outdoors on perennial ryegrass/white clover pasture (CLV). Full-fat Cheddar cheeses were manufactured in triplicate at pilot scale from each feeding system in September 2015 and were examined over a 270-d ripening period at 8°C. Pasture-derived feeding systems were shown to produce Cheddar cheeses yellower in color than that of TMR, which was positively correlated with increased cheese β-carotene content. Feeding system had a significant effect on the fatty acid composition of the cheeses. The nutritional composition of Cheddar cheese was improved through pasture-based feeding systems, with significantly lower thrombogenicity index scores and a greater than 2-fold increase in the concentration of vaccenic acid and the bioactive conjugated linoleic acid C18:2 cis-9,trans-11, whereas TMR-derived cheeses had significantly higher palmitic acid content. Fatty acid profiling of cheeses coupled with multivariate analysis showed clear separation of Cheddar cheeses derived from pasture-based diets (GRS or CLV) from that of a TMR system. Such alterations in the fatty acid profile resulted in pasture-derived cheeses having reduced hardness scores at room temperature. Feeding system and ripening time had a significant effect on the volatile profile of the Cheddar cheeses. Pasture-derived Cheddar cheeses had significantly higher concentrations of the hydrocarbon toluene, whereas TMR-derived cheese had significantly higher concentration of 2,3-butanediol. Ripening period resulted in significant alterations to cheese volatile profiles, with increases in acid-, alcohol-, aldehyde-, ester-, and terpene-based volatile compounds. This study has demonstrated the benefits of pasture-derived feeding systems for production of Cheddar cheeses with enhanced nutritional and rheological quality compared with a TMR feeding system.     

CFD Process Modeling of the Industrial Calcination of Diatomite

Calcination of diatomite is an expensive process frequently resulting in products with unpredictable structure. Alternatively, calcination in swirling flow is an energy‐saving option. Computational fluid dynamics modeling of an experimental calcination process unit is presented. Experimental results and systematic collection of process data were used to define boundary condition for steady‐state and transient simulation runs. The comparison of experimental and simulation results shows the complexity of the calcination process. The results can be used for further process optimization.     

Castles and Pavilions: Creating New Hybrid Places of Exchange

Tom Holbrook , Director at architecture and urban design practice 5th Studio, describes two projects in the south of England that respond spatially to the needs of ‘the knowledge economy’. The first is the River Lea Park, to the east of London, which promotes open connectivity between people in a post- industrial landscape; and the second is the Creative Exchange in St Neots, Cambridgeshire, a building designed to accommodate local enterprise. Both are designed to redirect social and economic activities, supporting creative swarming, and establishing what Stafford Beer has coined as ‘platforms for change’.     

Long-term impact of anaerobic reaction time on the performance and granular characteristics of granular denitrifying biological phosphorus removal systems

Removal of nitrogen and phosphorus (P) from wastewater is successfully and widely practiced in systems employing both granular sludge technology and enhanced biological P removal (EBPR) processes; however, the key parameter, anaerobic reaction time (AnRT), has not been thoroughly investigated. Successful EBPR is highly dependent on an appropriate AnRT, which induces carbon and polyphosphate metabolism by phosphorus accumulating organisms (PAOs). Therefore, the long-term impact of AnRT on denitrifying P removal performance and granular characteristics was investigated in three identical granular sludge sequencing batch reactors with AnRTs of 90 (R1), 120 (R2) and 150 min (R3). The microbial community structures and anaerobic stoichiometric parameters related to various AnRTs were monitored over time. Free nitrite acid (FNA) accumulation (e.g., 0.0008–0.0016 mg HNO₂–N/L) occurred frequently owing to incomplete denitrification in the adaptation period, especially in R3, which influenced the anaerobic/anoxic intracellular intermediate metabolites and activities of intracellular enzymes negatively, resulting in lower levels of poly-P and reduced activity of polyphosphate kinase. As a result, the Accumulibacter-PAOs population decreased from 51 ± 2.5% to 43 ± 2.1% when AnRT was extended from 90 to 150 min, leading to decreased denitrifying P removal performance. Additionally, frequent exposure of microorganisms to the FNA accumulation and anaerobic endogenous conditions in excess AnRT cases (e.g., 150 min) stimulated increased extracellular polymeric substances (EPS) production by microorganisms, resulting in enhanced granular formation and larger granules (size of 0.6–1.2 mm), but decreasing anaerobic PHA synthesis and glycogen hydrolysis. Phosphorus removal capacity was mediated to some extent by EPS adsorption in granular sludge systems that possessed more EPS, longer AnRT and relatively higher GAOs.