Molecular Genetics of Conjunctival Melanoma and Prognostic Value of TERT Promoter Mutation Analysis

The aim of this study was exploration of the genetic background of conjunctival melanoma (CM) and correlation with recurrent and metastatic disease. Twenty-eight CM from the Rotterdam Ocular Melanoma Study group were collected and DNA was isolated from the formalin-fixed paraffin embedded tissue. Targeted next-generation sequencing was performed using a panel covering GNAQ, GNA11, EIF1AX, BAP1, BRAF, NRAS, c-KIT, PTEN, SF3B1, and TERT genes. Recurrences and metastasis were present in eight (29%) and nine (32%) CM cases, respectively. TERT promoter mutations were most common (54%), but BRAF (46%), NRAS (21%), BAP1 (18%), PTEN (14%), c-KIT (7%), and SF3B1 (4%) mutations were also observed. No mutations in GNAQ, GNA11, and EIF1AX were found. None of the mutations was significantly associated with recurrent disease. Presence of a TERT promoter mutation was associated with metastatic disease (p-value = 0.008). Based on our molecular findings, CM comprises a separate entity within melanoma, although there are overlapping molecular features with uveal melanoma, such as the presence of BAP1 and SF3B1 mutations. This warrants careful interpretation of molecular data, in the light of clinical findings. About three quarter of CM contain drug-targetable mutations, and TERT promoter mutations are correlated to metastatic disease in CM.     

Effects of Radiation and Hydrogen on the Fracture Resistance of Borosilicate Glasses

In this study, short bar fracture toughness samples were used to determine the effects of radiation and hydrogen on the resistance to fracture of vitreous silica and four commercial borosilicate glasses. The results showed that neither exposure to 10¹⁰ rads of γ-radiation nor saturation to a room-temperature-equivalent exposure of 408 atm of hydrogen had an effect on fracture resistance. Nevertheless, when samples were saturated with hydrogen and then exposed to radiation, resistance to fracture increased significantly in some of the glasses. The increase in the resistance to fracture correlated directly with the increase in concentration of hydroxyl and hydride groups created by exposure to radiation and hydrogen. The concentration of these groups differs with glass composition and accounts for the difference in behavior between the types of glass studied.     

An evaluation of the performance of an automated procedure for comparative modelling of protein tertiary structure

A 3-D model of a protein can be constructed from its amino acidsequence and the 3-D structures of one or more homologues byannealing three sets of fragments: the structurally conservedregions, structurally variable regions and the side chains.The method encoded in the computer program COMPOSER was assessedby generating 3-D models of eight proteins whose crystal structuresare already known and for which 3-D structures of homologuesare available. In the structurally conserved regions, differencesbetween modelled and X-ray structures are smaller than the differencesbetween the X-ray structures of the modelled protein and thehomologues used to build the model. When several homologuesare used, the contributions of the known structures are weighted,preferably by the square of sequence similarity; this is especiallyimportant when the similarities of the homologues to the modelledstructure differ greatly. The ‘collar’ extensionapproach, in which a similar region of different length in ahomologue is used to extend the framework, can result in a moreaccurate model. If known homologues comprise more than one relatedgroup of proteins and they are both distantly related to theunknown, then alignment of the sequence to be modelled witheach group of homologues facilitates identification of structurallyconserved regions of the unknown and leads to an improved model.Models have root mean square differences (r.m.s.d.s) with thestructures defined by X-ray analysis of between 0.73 and 1.56Å for all C atoms, for seven of the eight models. Forthe model of mucor pepsin, where the closest homologue has 33%sequence identity and 20% of the residues are in structurallyvariable regions, the r.m.s.d. for the framework region is 1.71Å and the r.m.s.d. for all C atoms is 3.47 Â.     

Studies of space-averaged mass transport in the FM01-LC laboratory electrolyser

Measurements of the mass transport limited current for the reduction of ferricyanide in 1M m potassium hydroxide and of copper(II) in 1.5 m sulphuric acid as a function of electrolyte flow rate are used to characterize the space-averaged mass transport properties of the FM01 laboratory electrolyser, with and without six types of polymer mesh turbulence promoters. In the absence of a promoter, the results followed the equation For the cell with the preferred turbulence promoter, the corresponding equation is Pressure drop data are also reported and it is confirmed that the presence of a turbulence promoter need not lead to a significant increase in the pressure drop over the reactor.     

The prediction of transport parameters in filamentous fermentation broths based on results obtained in pseudoplastic polymer solutions

Transport phenomena studies on single phase “model” fluids are of limited value in biochemical engineering if they cannot be translated to the heterogeneous systems encountered in real fermentation processes. In this paper we discuss the utility of polymer solutions as models of filamentous fermentation broths for evaluation of: pipeline friction factors and impeller power numbers (turbine and helical ribbon). To a first approximation, polymer solutions can serve as suitable models for the prediction of laminar flow pressure drop in pipelines and turbulent power consumption in stirred tanks. However, results obtained on polymer solutions do not directly apply to filamentous fermentation broths for predictions of laminar flow impeller power consumption and the transition point for turbulent flow in stirred tanks. These discrepancies are believed to result from the existence of a time dependent yield stress in filamentous fermentation broths.     

Automatic dimensional reduction and meshing of stiffened thin-wall structures

The creation of idealised, dimensionally reduced meshes for preliminary design and optimisation remains a time-consuming, manual task. A dimensionally reduced model is ideal for assessing design changes through modification of element properties without the need to create a new geometry or mesh. In this paper, a novel approach for automating the creation of mixed dimensional meshes is presented. The input to the process is a solid model which has been decomposed into a non-manifold assembly of smaller volumes with different meshing significance. Associativity between the original solid model and the dimensionally reduced equivalent is maintained. The approach is validated by means of a free-free modal analysis on an output mesh of a gas turbine engine component of industrial complexity. Extensions and enhancements to this work are also discussed.     

Material specification and the availability and life of desalination equipment in both Saudi Arabia and the Arabian Gulf

The author describes operational experience with various materials of construction in both low temperature polyphosphate treated evaporators and also in high temperature evaporators using acid treatment.The author references the repeated use of unsuitable materials and proposes a solution by the development of more detailed and positive specifications for plant and equipment. A problem faced by many manufacturers is the fact that as a result of broad, open specifications they are forced to use inferior materials in order to remain competitive. The author discusses the use of both corrosion resistant linings and operating experience. In summary, the paper correlates the operating conditions with selection of materials.     

Fault-Tolerant Formation Driving Mechanism Designed for Heterogeneous MAVs-UGVs Groups

A fault-tolerant method for stabilization and navigation of 3D heterogeneous formations is proposed in this paper. The presented Model Predictive Control (MPC) based approach enables to deploy compact formations of closely cooperating autonomous aerial and ground robots in surveillance scenarios without the necessity of a precise external localization. Instead, the proposed method relies on a top-view visual relative localization provided by the micro aerial vehicles flying above the ground robots and on a simple yet stable visual based navigation using images from an onboard monocular camera. The MPC based schema together with a fault detection and recovery mechanism provide a robust solution applicable in complex environments with static and dynamic obstacles. The core of the proposed leader-follower based formation driving method consists in a representation of the entire 3D formation as a convex hull projected along a desired path that has to be followed by the group. Such an approach provides non-collision solution and respects requirements of the direct visibility between the team members. The uninterrupted visibility is crucial for the employed top-view localization and therefore for the stabilization of the group. The proposed formation driving method and the fault recovery mechanisms are verified by simulations and hardware experiments presented in the paper.     

Interactional Order and Constructed Ways of Seeing with Touchless Imaging Systems in Surgery

While surgical practices are increasingly reliant on a range of digital imaging technologies, the ability for clinicians to interact and manipulate these digital representations in the operating theatre using traditional touch based interaction devices is constrained by the need to maintain sterility. To overcome these concerns with sterility, a number of researchers are have been developing ways of enabling interaction in the operating theatre using touchless interaction techniques such as gesture and voice to allow clinicians control of the systems. While there have been important technical strides in the area, there has been little in the way of understanding the use of these touchless systems in practice. With this in mind we present a touchless system developed for use during vascular surgery. We deployed the system in the endovascular suite of a large hospital for use in the context of real procedures. We present findings from a study of the system in use focusing on how, with touchless interaction, the visual resources were embedded and made meaningful in the collaborative practices of surgery. In particular we discuss the importance of direct and dynamic control of the images by the clinicians in the context of talk and in the context of other artefact use as well as the work performed by members of the clinical team to make themselves sensable by the system. We discuss the broader implications of these findings for how we think about the design, evaluation and use of these systems.