Evaluation of microbial toxins,trace elements and sensory properties of a high-theabrownins instant Pu-erh tea produced using Aspergillus tubingensis via submerged fermentation

Theabrownins (TB) are polymeric phenolic compounds associated with the multiple bioactivities of Pu-erh tea, a post-fermented Chinese dark tea. High-TB instant Pu-erh tea was produced via a novel submerged fermentation (SF) using Aspergillus tubingensis and compared with samples produced commercially via the conventional solid-state fermentation (SSF). Viable microorganisms and microbial toxins, especially aflatoxins B₁, G₁, B₂, G₂, cyclopiazonic acid, fumonisins B₁, B₂, B₃ and ochratoxin A, were below the detection limit in all samples. Fewer microbial metabolites were found in SF instant tea compared with the SSF teas. Based on an adult consuming 1 g of instant Pu-erh tea daily, the dietary intake of investigated elements was below the safe limits recommended by various authorities. Tasters viewed the instant tea infusions as very mild, smooth, mellow and full. This suggested that submerged fermentation using A. tubingensis offers a speedy and safe alternative to commercial production of instant Pu-erh tea.     

摩擦换向抽油机悬点运动分析计算

摩擦换向抽油机采用开关磁阻电动机或变频调速电动机,其特点是可以频繁双向旋转,带动摩擦轮正反转,实现光杆的上行下行。该抽油机运动特点与游梁式抽油机运动特点有较大区别,文章分析了摩擦换向抽油机的运动特点,给出了该机悬点位移、速度、加速度的计算方法。     

Mechanization techniques for poplar development in Turkey

Annual commercial poplar wood production in Turkey is about 3.6 million cubic meters, half of which comes from hybrid poplar I-214. The poplar plantation areas of Turkey are 70% of the poplar plantation areas of the Near and Middle Eastern countries, and nearly 5% of the world. In this study, unit times of standard operations were investigated in poplar nurseries and plantations in which new mechanical technology was applied and compared with traditional methods. Analyses of unit times were made on 11 treatments for poplar nurseries and nine treatments for poplar plantations; some new methods are also recommended. Mechanization methods based on new technologies give promising results in poplar nurseries and plantations.     

Bioeffects of Low Energy Ion-Beam Implantation and Vacuum Treatment on M1 Arabidopsis Thaliana

Vacuum treatment and ion-beam bombardment are two major processes in the low energy ion-beam implantation. To accurately study the contributions of these two major factors to the bioeffects separately, the M1 generation variation of Arabidopsis thaliana with ion-beam implantation and vacuum treatment were compared through a series of key plant development parameters including morphological observation, biochemical assay and RAPD （random amplified polymorphic DNA） analysis. The results showed that ion-beam implantation had obvious effect on almost all of these parameters, and the vacuum treatment had some impacts on several morphological parameters such as the bolting time and the length of the primary stem. Taking the results together, the indication is that vacuum treatment has some slight contributions to the bioeffects of ion-beam implantation while ion-beam bombardment itself is the major creator of the bioeffects.     

Low-temperature growth of silicon-boron layer as solid diffusionsource for polysilicon contacted p+-n shallow junction

A new material, Si-B, is proposed as a solid diffusion source for fabrication of poly-Si contacted p⁺-n shallow junctions. The junction depth of the Si-B source diode has been measured and compared with that of a BF₂⁺-implanted poly-Si source diode. It was found that the Si-B source diode had a much shallower junction and was less sensitive to thermal budget than the BF₂⁺ source diode. This was attributed to the smaller surface concentration and diffusivity of boron in the silicon in Si-B source diodes. Regarding electrical characteristics of diodes with a junction depth over 500 Å, a forward ideality factor of better than 1.01 over 8 decades and a reverse-current density lower than 0.5 nA/cm² at -5 V were obtained. As the junction depth shrank to 300 Å, the ideality factor and reverse current density of diodes increased slightly to 1.05 and 1.16 nA/cm², respectively. These results demonstrated that a uniform ultrashallow p⁺-n junction can be obtained by using a thin Si-B layer as a diffusion source     

Sparking at cathode tools during electrochemical machining in flow-through cells

The current density used in electrochemical machining can be increased only up to a certain value, above which the formation of electric sparks on the cathode (tool) is observed, whereby the latter is damaged and the anode surface becomes rough. The present work is devoted to the measurement of this critical density for small metal cathodes placed on the wall of a flow-through channel for Reynolds numbers from 1265 up to 5902 and static pressures ranging from 0.1 up to 1.0 MPa. The results are correlated by criterion equations which gave values of critical (sparking) cathodic current density,j _s, with an average error of 7.1 % for laminar flow and 4.1 % for turbulent flow. The equations can be used for the calculation of the sparking current density for industrial flow-through cells for electrochemical machining.     

The composition of volatile extractives from the wood of Juniperus excelsa, Juniperus foetidissima and Juniperus oxycedrus

J. excelsa , J. foetidissima and J. oxycedrus. Among the compounds the monoterpenes exist in minor amounts while the sesquiterpenes including their oxygenated members as well as sesquiterpene alcohols consist of the majority of the whole substances. The existence of some compounds of the oils might be attributes of the species and their sap- and heartwood. On the other side though notable differences, the essential oils of Turkish juniper woods resemble the commercial cedar wood oils.

---

Die Zusammensetzung der flüchtigen Extraktstoffe im Holz von Juniperus foetidissima und Juniperus oxycedrus

J. excelsa , J. foetidissima und J. oxycedrus. Monoterpene bilden einen geringen Anteil der Extraktstoffe. Der Hauptteil besteht aus Sesquiterpenen mit deren Oxydationsprodukten. Das Vorkommen einiger der ?le k?nnte charakteristisch sein für die jeweilige Art bzw. deren Splint- und Kernholz Allerdings gleichen diese ?le, trotz geringer Unterschiede, den wesentlichen ?lbestandteilen von Kommerziellen Zedernh?lzern.

---

---

This work was supported by the research found of the Istanbul University. Project nr: 1335/280799.