A maximum NEC criterion for Compton collimation to accurately identify true coincidences in PET

In this work, we propose a new method to increase the accuracy of identifying true coincidence events for positron emission tomography (PET). This approach requires 3-D detectors with the ability to position each photon interaction in multi-interaction photon events. When multiple interactions occur in the detector, the incident direction of the photon can be estimated using the Compton scatter kinematics (Compton Collimation). If the difference between the estimated incident direction of the photon relative to a second, coincident photon lies within a certain angular range around colinearity, the line of response between the two photons is identified as a true coincidence and used for image reconstruction. We present an algorithm for choosing the incident photon direction window threshold that maximizes the noise equivalent counts of the PET system. For simulated data, the direction window removed 56%-67% of random coincidences while retaining > 94% of true coincidences from image reconstruction as well as accurately extracted 70% of true coincidences from multiple coincidences.     

Compensation of irradiation in a wide frequency range

Variants of application of the compensation method in a wide frequency range are considered. The method enables one to reduce the irradiation of a human organism and create a low-intensity field region (dark spot) in the near zone of an antenna. Structures with identical antennas, antennas equally spaced from the compensation point, and antennas with planar reflectors are proposed and analyzed.     

Approximation and Heuristic Algorithms for Minimum-Delay Application-Layer Multicast Trees

In this paper we investigate the problem of finding minimum-delay application-layer multicast trees, such as the trees constructed in overlay networks. It is accepted that shortest path trees are not a good solution for the problem since such trees can have nodes with very large degree, termed high-load nodes. The load on these nodes makes them a bottleneck in the distribution tree, due to computation load and access link bandwidth constraints. Many previous solutions limited the maximum degree of the nodes by introducing arbitrary constraints. In this work, we show how to directly map the node load to the delay penalty at the application host, and create a new model that captures the trade offs between the desire to select shortest path trees and the need to constrain the load on the hosts. In this model the problem is shown to be NP-hard. We therefore present an approximation algorithm and an alternative heuristic algorithm. Our heuristic algorithm is shown by simulations to be scalable for large group sizes, and produces results that are very close to optimal     

Formation of a weak-field zone near a wire antenna

The problem of lowering the field intensity near an antenna is considered. It is shown to be expedient to use a wire radiator during solution of this problem. The field of the main (high-powered) element of this radiator coincides with the field radiated by a dipole (monopole) and ensures formation of an omnidirectional pattern in the horizontal plane. The fields of remaining wires partially cancel (neutralize) the field of the main element in some part of the near-field zone, thus ensuring formation of the so-called dark spot (a weak-field area) near the antenna. As such a wire radiator, a folded monopole open at the end opposite to the generator is considered. The use of this radiator in a personal cellular phone (handset) allows a 3-to 4-fold lowering of the power of irradiation of a users’s head.     

Analysis of the formation of structures and chaotic dynamics in a nonrelativistic electron beam with a virtual cathode in the presence of a decelerating field

A nonrelativistic electron beam with a virtual cathode situated in the diode gap with a decelerating field is experimentally and theoretically studied. A 1D model of the electron beam in the presence of a decelerating field is constructed. Nonlinear nonstationary processes in this system are investigated by means of numerical analysis of the model. The processes are described and interpreted with regard to formation and interaction of structures in the electron flow. The theoretical results are qualitatively confirmed by the experimental data showing that the system under study can be considered as a promising controlled source of chaotic oscillations in the microwave range.     

Enhancement of Thermopower of TAGS‐85 High‐Performance Thermoelectric Material by Doping with the Rare Earth Dy

Enhancement of thermopower is achieved by doping the narrow‐band semiconductor Ag_6.52Sb_6.52Ge_36.96Te₅₀ (acronym TAGS‐85), one of the best p‐type thermoelectric materials, with 1 or 2% of the rare earth dysprosium (Dy). Evidence for the incorporation of Dy into the lattice is provided by X‐ray diffraction and increased orientation‐dependent local fields detected by ¹²⁵Te NMR spectroscopy. Since Dy has a stable electronic configuration, the enhancement cannot be attributed to 4f‐electron states formed near the Fermi level. It is likely that the enhancement is due to a small reduction in the carrier concentration, detected by ¹²⁵Te NMR spectroscopy, but mostly due to energy filtering of the carriers by potential barriers formed in the lattice by Dy, which has large both atomic size and localized magnetic moment. The interplay between the thermopower, the electrical resistivity, and the thermal conductivity of TAGS‐85 doped with Dy results in an enhancement of the power factor (PF) and the thermoelectric figure of merit (ZT) at 730 K, from PF = 28 μW cm^?1 K^?2 and ZT ≤ 1.3 in TAGS‐85 to PF = 35 μW cm^?1 K^?2 and ZT ≥ 1.5 in TAGS‐85 doped with 1 or 2% Dy for Ge. This makes TAGS‐85 doped with Dy a promising material for thermoelectric power generation.     

X-ray or UV adjustment of MOS threshold voltage: Analytical and numerical modeling

A model is formulated that describes how radiation-induced charge accumulates in the gate oxide of a MOS structure and how it decays through tunneling and thermal emission. The model is used in a numerical analysis of the x-ray or UV adjustment of threshold voltage in MOS-circuit manufacture. The limits of this process technique are evaluated.     

Single Cell Bioprinting with Ultrashort Laser Pulses

Tissue engineering requires the precise positioning of mammalian cells and biomaterials on substrate surfaces or in preprocessed scaffolds. Although the development of 2D and 3D bioprinting technologies has made substantial progress in recent years, precise, cell-friendly, easy to use, and fast technologies for selecting and positioning mammalian cells with single cell precision are still in need. A new laser-based bioprinting approach is therefore presented, which allows the selection of individual cells from complex cell mixtures based on morphology or fluorescence and their transfer onto a 2D target substrate or a preprocessed 3D scaffold with single cell precision and high cell viability (93–99% cell survival, depending on cell type and substrate). In addition to precise cell positioning, this approach can also be used for the generation of 3D structures by transferring and depositing multiple hydrogel droplets. By further automating and combining this approach with other 3D printing technologies, such as two-photon stereolithography, it has a high potential of becoming a fast and versatile technology for the 2D and 3D bioprinting of mammalian cells with single cell resolution.     

A three-dimensional thermal and electromagnetic model of whole limbheating with a MAPA

Previous studies by the authors have shown that if properly implemented, the Pennes assumptions can be applied to quantify bioheat transfer during extremity heating. Given its relative numerical simplicity and its ability to predict temperatures in thermoregulated tissue, the Pennes model of bioheat transfer was utilized in a three-dimensional thermal model of limb heating. While the arterial blood temperature was assumed to be radially uniform within a cross section of the limb, axial gradients in the arterial and venous blood temperatures were computed with this three-dimensional model. A realistically shaped, three-dimensional finite element model of a tumor-bearing human lower leg was constructed and was "attached" mathematically to the whole body thermal model of man described in previous studies by the authors. The central as well as local thermoregulatory feedback control mechanisms which determine blood perfusion to the various tissues and rate of evaporation by sweating were input into the limb model. In addition, the temperature of the arterial blood which feeds into the most proximal section of the lower leg was computed by the whole body thermal model. The variations in the shape of the tissues which comprise the limb were obtained from computerized tomography scans. Axial variations in the energy deposition patterns along the length of the limb exposed to a miniannular phased array (MAPA) applicator were also input into this model of limb heating. Results indicate that proper positioning of the limb relative to the MAPA is a significant factor in determining the effectiveness of the treatment. A patient-specific hyperthermia protocol can be designed using this coupled electromagnetic and thermal model.     

混合信号芯片设计处理关键的转折阶段

通过简单地剪切和粘贴知识产权(IP)内核可以加快无工厂半导体公司的系统级芯片(SOC)设计。 过去十年中,涌现出大量的为系统制造商提供专用芯片(ASIC)的小型IC设计公司。这些被称为无工厂企业(因为他们将IC制造过程转交给商业芯片制造工厂),需要的启动资金较少,而且如果市场接受他们的产品的话,能够获得丰厚的回报。在大量设计工具的支持下,这些无工厂设计企业在历史悠久的大型芯片制造商,如IBM、Intel、Motorola和德州仪器公司所主导的市场中赢得了一席之地。