Studies on some alkylamide surfactant gas hydrate anti-agglomerants

Low dosage hydrate inhibitors (LDHIs) are a recently developed hydrate control technology, which can be more cost-effective than traditional practices such as the use of thermodynamic inhibitors e.g., methanol and glycols. Two classes of LDHI called kinetic inhibitors (KHIs) and anti-agglomerants (AAs) are already being successfully used in the field. This paper describes efforts to develop new classes of AA surfactant with one or two alkylamide groups in the polar head. The goal was to find an AA that was as good as commercial quaternary AAs, which would be economically competitive and more environmentally friendly. The chemistry and environmental properties of the new surfactants are described along with experiments to determine their performance carried out in high-pressure sapphire cells and a wheel loop. The results indicate positive performance for some products but not as good as a commercial quaternary ammonium-based surfactant AA. The best surfactants had one or two carbonylpyrrolidine or isopropylamide groups in the head. The performance of the best AAs was found to be dependent on the hydrocarbon phase and salinity of the water phase.     

Dusty Sheaths in Magnetized Plasmas

Parameters of self-consistent magnetized dusty sheaths are investigated using computer simulations of a temporal evolution of one-dimensional slab plasma with dust particles. The evolution is caused by a collection of electrons and ions by both a wall (electrode) and dust particles, which are initially immersed into plasma and distributed in front of the electrode. Obtained results show the existence of oscillations of a self-consistent potential in magnetized dusty sheaths including boundary potentials. Dust particles weaken magnetized sheaths and create additional sheaths close to a boundary of dust particles. The magnetic field does not influence on the dust particle charge.     

Hydrothermal synthesis of TiO<Subscript>2</Subscript> nano-particles using novel water-soluble titanium complexes

Hydrothermal treatment of a series of water-soluble titanium complexes resulted in the formation of TiO₂. Rutile, anatase or a mixture of both can be synthesized by varying the ligands. The titania obtained was composed of nano-sized particles with large specific surface areas. These TiO₂ powders exhibited high photocatalytic activity for NO _x decomposition. In particular, they demonstrated higher activity than P25 (Degussa) under visible-light irradiation.     

Development of low cost production technologies for polycrystalline silicon solar cells

To develop a technology of forming grooves for low cost cell production, a multi-blade wheel grinding method was investigated. The process time of groove formation on the surface of 10 × 10 cm² polycrystalline silicon substrate was reduced to 30 s by a newly developed high-speed groove formation machine. Simultaneous formation of junction and anti-reflection coating by atmospheric pressure chemical vapor deposition (APCVD) technique was also investigated. For electrodes formation process, single firing method for both side electrodes made possible to simplify the firing process and to speed up from a conventional speed of 400 mm/min to 5000 mm/min.     

Isolation of a thermophile degrading poly(butylene succinate-co-butylene adipate)

A thermophile, strain 73, which degrades poly(butylene succinate-co-butylene adipate) (PBSA) film was isolated from 95 soil samples obtained from different locations by cultivation using an enrichment culture technique at 60 degrees C. At this temperature, the strain grew on PBSA and the dissolved total organic carbon (TOC) concentration in the medium changed according to the growth stage, i.e., after the TOC concentration rapidly reached the minimum, it increased rapidly until it reached a peak and then decreased thereafter. During cultivation, PBSA was almost eliminated and the solution viscosity of the residual PBSA decreased markedly. Gel permeation chromatograms of the residual PBSA showed a significant decrease in the main peak and the appearance of a new peak at the low molecular weight region. The strain was identified as Bacillus stearothermophilus, which has an optimum growth temperature of approximately 63 degrees C.     

Uric acid photo-oxidation assay: in vitro comparison of sunscreening agents

We present a new method to evaluate the photo-oxidative activity of sunscreening agents based on the photodynamic oxidation of uric acid. Uric acid was selected as the oxidant probe for its high reactivity to singlet oxygen and oxygen radicals, high sensitivity of detection using electrochemical (EC) techniques, low light absorptivity and high photochemical stability in the UVA/B region of interest, and stability to autoxidation. The method is demonstrated by the photodynamic oxidation of uric acid on co-irradiation with Rose Bengal, a highly efficient photosensitizing dye for the production of singlet oxygen (1O2). Using this assay we found that the relative photodynamic oxidation rates of UVB-absorbing sunscreens in 80% methanol on irradiation with >290 nm light decreased in the order 2-ethylhexyl 4-dimethylaminobenzoate (DMABA-2EH) > 2-ethylhexyl 4-methoxycinnamate (MCA-2EH) and the experimental sunscreens, 1-(1,1-dimethylethyl)-3-octanoyl-4,4-dimethyl- 1,4,5,6,-tetrahydropyridine (ICI-319) and 1-(2-methylpropyl)-3-propionyl-4,4-dimethyl-1,4,5,6-tetrahydropyridine (ICI-855). The relative photodynamic oxidation rates of UVA-absorbing sunscreens decreased in the order 4-tert-butyl-4'-methoxydibenzoylmethane (BMDBM) and 4-(2-propyl)benzophenone (PB) > 2-hydroxy-4'-methoxy-benzophenone (HMB) and 2,2'-dihydroxy-4-methoxybenzophenone (DHMB). We have confirmed the photodynamic activity of DMABA-2EH for the production of singlet oxygen (1O2) using electron paramagnetic resonance (EPR) spectroscopy and the reagent 2,2,6,6-tetramethyl-4-piperidone (4-oxo-TEMP). We failed to detect the photodynamic production of the oxyradicals, superoxide (O2.-) and hydroxyl radical (HO.) using N-tert-butyl-a-phenylnitrone (PBN) and 5,5-dimethyl-1-pyrrolidine-1-oxide (DMPO) as a result of photochemical interference caused by these spin-trapping reagents. The uric acid photo-oxidation assay was also used to compare the photodynamic reactivity of light-reflective, microfine oxides TiO2, ZnO and ZrO2 suspended in aqueous 80% methanol. All of the microfine oxides (uncoated) showed greater photodynamic reactivity in equimolar dispersion than did any of the organic UVA- and UVB-absorbing sunscreens in homogeneous solution. In this assay the photodynamic oxidation rates for the microfine oxides decreased in the order ZnO > TiO2 (anatase) > ZrO2 > TiO2 (rutile).     

Molecular cloning and high-level expression in Escherichia coli of fungal alpha-galactosidase from Absidia corymbifera IFO 8084

A cDNA encoding the alpha-galactosidase of Absidia corymbifera IFO 8084 was cloned and sequenced. The cloned DNA has a single open-reading frame consisting of 2190 base pairs, and the deduced amino acid sequence revealed that the mature enzyme consisted of 730 amino acid residues with a molecular mass of 82,712 Da. The native structure of the alpha-galactosidase of A. corymbifera IFO 8084 was determined to be a tetramer. Comparison with amino acid sequences of other alpha-galactosidase showed high homology with sequences of members of family 36. An expression vector, pET32Trx/galalpha, was constructed by introducing the cDNA coding region into a thioredoxin fusion system, pET32-Ek/LIC. The resulting transformant, pET32Trx/galalpha, overproduced the active enzyme as a thioredoxin fused form in the host Escherichia coli. By using His-binding metal affinity chromatography, recombinant alpha-galactosidase was purified to homogeneity in a single step. The purified recombinant fusion alpha-galactosidase showed properties very similar to the native alpha-galactosidase from A. corymbifera IFO 8084.     

Adenosine A? receptor activation selectively impairs the acquisition of contextual fear conditioning in rats.

Three experiments were conducted to examine the importance of adenosine A? receptors for the acquisition and expression of hippocampal-dependent and hippocampal-independent forms of conditioned fear. In Experiment 1, the selective adenosine A? receptor agonist, N?-cyclopentyladenosine (CPA), or saline was administered intraperitoneally to male rats 30 min prior to Pavlovian fear conditioning, which consisted of 7 tone–shock pairings. Adenosine A? receptor activation dose-dependently and selectively disrupted the acquisition of contextual fear conditioning while sparing tone–shock associations. Experiments 2 and 3 demonstrated that CPA's selective disruption of contextual learning could not be attributed to context being weaker than tone conditioning or to state-dependent learning. Adenosine A? receptor activation also impaired the expression of both context- and tone-elicited fear. These results suggest that endogenous adenosine modulates the acquisition and expression of emotional (fear) memories by acting on A? receptors in brain regions underlying fear conditioning. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Performance and emissions of a supercharged dual-fuel engine fueled by hydrogen-rich coke oven gas

This study investigated the engine performance and emissions of a supercharged dual-fuel engine fueled by hydrogen-rich coke oven gas and ignited by a pilot amount of diesel fuel. The engine was tested for use as a cogeneration engine, so power output while maintaining a reasonable thermal efficiency was important. Experiments were carried out at a constant pilot injection pressure and pilot quantity for different fuel-air equivalence ratios and at various injection timings without and with exhaust gas recirculation (EGR). The experimental strategy was to optimize the injection timing to maximize engine power at different fuel-air equivalence ratios without knocking and within the limit of the maximum cylinder pressure. The engine was tested first without EGR condition up to the maximum possible fuel-air equivalence ratio of 0.65. A maximum indicated mean effective pressure (IMEP) of 1425 kPa and a thermal efficiency of 39% were obtained. However, the nitrogen oxides (NOx) emissions were high. A simulated EGR up to 50% was then performed to obtain lower NOx emissions. The maximum reduction of NOx was 60% or more maintaining the similar levels of IMEP and thermal efficiency. Two-stage combustion was obtained; this is an indicator of maximum power output conditions and a precursor of knocking combustion.     

Experimental investigation on optimization of invert trap configuration for sewer solid management

Invert traps have been successfully used to collect sediments at convenient locations within the sewer network, where large volumes of solids can be stored. In the present study, experiments have been performed in 15 cm wide and 5 m long channel for the measurement of retention ratios of five different invert trap configurations (namely, rectangular, trapezoidal with one side vertical, trapezoidal, trapezoidal with rectangular base, rectangular with trapezoidal base) having top width of 32 cm and depth of 28 cm with slots of three different sizes (namely, 5, 9 and 15 cm) for the flow of seven different sediment types (namely, two types of sand, glass beads and four types of plastic beads) at different flow rates for each trap. The flow rates selected in present study cover entire range of flow rate expected in channels during dry weather flow and monsoon. Flow field and retention ratio predictions for each invert trap configuration have been carried out using CFD modeling with the help of FLUENT software using Renormalization Group (RNG) k–ε along with Discrete Phase Model (DPM). The simulation results are capable of showing particle trajectories, the effect of flow rate and trap geometry on the flow patterns, developed within the trap. Based on CFD modeling and experimental measurements, it is concluded that the invert trap having rectangular shape with trapezoidal base is the most efficient trap configuration with highest sediment retention ratio.