Motion blur reduction with triangular waveform emission and optimized enhance filter

Degradation of moving image quality by motion blur on hold‐type displays is a well‐known issue. In order to reduce motion blur, a number of driving methods, such as a higher frame rate and a shorter temporal aperture, have been proposed. Methods to reduce motion blur by means of signal processing as a precompensation method have also been proposed. In these methods, however, hold emission that emits light at a constant intensity during a frame is used. Since the spatial frequency response of the hold emission in a moving picture has a null point, the effectiveness of precompensation methods is limited to the lower‐spatial frequency domain. A triangular waveform emission has been investigated, and it has a higher spatial frequency response than hold emission. In the present paper, we calculated an optimized enhancement filter for the triangular waveform emission as a precompensation method and demonstrated its effectiveness for reducing motion blur by using the triangular waveform emission and the optimized enhancement filter. As a result, the optimized enhancement filter reduced motion blur and suppressed distortion that emerged when using a conventional enhancement filter.     

Control of the microparticle position in the channel based on dielectrophoresis

We report here the control of the microparticles position within fluid flow based on its size by using dielectrophoresis (DEP) with a microelectrode array consisted of rectangular features with the different size of width and gap. 3 μm- and 10 μm-diameter particles were introduced into the channel with 300 μm height at 30 μl/min. An AC electric field (20 V peak–peak and 2 MHz) was then applied to microelectrode arrays to form dielectrophoretic fluid cage, resulting in a formation of flow paths with low electric fields on the arrays. The microparticles separately flow in line streams along the paths formed between the rectangular features of the arrays, the 3 μm-diameter particles mainly flow through the narrow path and 10 μm-diameter particles through the wide path. These results indicated that positions of two types of microparticles in the fluidic channel were easily separated and controlled using the n-DEP.     

Quantum walks on simplicial complexes

We construct a new type of quantum walks on simplicial complexes as a natural extension of the well-known Szegedy walk on graphs. One can numerically observe that our proposing quantum walks possess linear spreading and localization as in the case of the Grover walk on lattices. Moreover, our numerical simulation suggests that localization of our quantum walks reflects not only topological but also geometric structures. On the other hand, our proposing quantum walk contains an intrinsic problem concerning exhibition of non-trivial behavior, which is not seen in typical quantum walks such as Grover walks on graphs.     

Rapid fabrication of nanoparticles array on polycarbonate membrane based on positive dielectrophoresis

We report here a rapid formation of island arrays with nanoparticles on and within polycarbonate (PC) membrane based on positive dielectrophoresis (p-DEP). For the fabrication of the patterning device, PC membranes with 10 μm thickness and 100, 200 or 400 nm pore size were sandwiched by an upper bare ITO substrate and a lower disk array ITO electrode which was defined by insulation layer of negative photoresist. A suspension of 190 nm diameter polymethylmethacrylate (PMMA) particles containing rhodamine 6G (R6G) fluorescent molecules was introduced into the device between the upper ITO and the PC membrane. AC electric signal (typically 20 Vpp, 70 kHz) was then applied to the ITO, resulting in the formation of island patterns with high electric fields gradient regions on and in the PC membrane. Particles patterns with island shape were assembled on membrane within 1 s after applying AC electric field. The electrodes can be used repeatedly as the template of subsequent patterning. Although, particles islands were only formed on the PC membrane with 100 and 200 nm diameter pores, the particles penetrated the membrane with 400 nm pores to form patterns on the back surface. Since the strong electric fields were formed at the edges of disks, particles on the back surface were the projection of the disk array of ITO to form ring shapes. The unique structure with particles was explained based on the simulation of electric field distribution. The present proposal offers a procedure to fabricate particle arrays with extremely simple, rapid and highly reproducible manner.     

Formation of single-walled carbon nanotube thin films enriched with semiconducting nanotubes and their application in photoelectrochemical devices

Single-walled carbon nanotube (SWCNT) thin films, containing a high-density of semiconducting nanotubes, were obtained by a gel-centrifugation method. The agarose gel concentration and centrifugation force were optimized to achieve high semiconducting and metallic nanotube separation efficiency at 0.1 wt% agarose gel and 18,000g. The thickness of SWCNT films can be precisely controlled from 65 to 260 nm with adjustable transparency. These SWCNT films were applied in photoelectrochemical devices. Photocurrents generated by semiconducting SWCNT enriched films are 15-35% higher than those by unsorted SWCNT films. This is because of reducing exciton recombination channels as a result of the removal of metallic nanotubes. Thinner films generate higher photocurrents because charge carriers have less chances going in metallic nanotubes for recombination, before they can reach electrodes. Developing more scalable and selective methods for high purity semiconducting SWCNTs is important to further improve the photocurrent generation efficiency by using SWCNT-based photoelectrochemical devices.     

Time-resolved conformational analysis of poly(ethylene oxide) during the hydrogelling process

We investigated a drastic conformation change in a poly(ethylene oxide) (PEO) chain during the hydrogelation process using infrared (IR) spectroscopy and quantum chemical calculations (QCCs). Time-resolved in situ IR spectra of the hydrogelling process of a semi-crystalline PEO solid were measured using a flow-through cell. It was found from the time-resolved IR study that gauche conformations around the C-C bonds in the crystalline phase PEO chain maintain their conformations even after hydrogelation, while at least half of the trans conformations around the C-O bonds change into gauche conformations upon hydrogelling. With regard to the phenomena of these conformation changes after contacting water, the destruction and hydrogelation of the crystalline phase around the C-C bonds of the hydrophobic moiety occur prior to changes around the C-O bonds of the hydrophilic moiety. In addition, our QCC confirmed that the stable hydration structure of bridging water, wherein the two hydroxyl groups in a water molecule donate hydrogen bonds to every other ether oxygen atoms in the PEO chain.     

Preparation of Na‐P1‐Type Zeolite and its Composite Material with Nanosized Magnetite

The Na‐P1‐type zeolite having a high cation‐exchange capacity (CEC) was obtained using the waste coal fly ash from thermal power stations and a 2M NaOH solution at 100°C. The Na‐P1‐type zeolite was formed with the reaction time of 6 h at 100°C, and its CEC value increased with an increase in the reaction time. The addition of a suitable amount of NaAlO₂ to the fly ash was also effective for improving the CEC value. A new composite material consisting of the Na‐P1‐type zeolite and magnetite was synthesized from the fly ash and iron chlorides because the magnetic collection was possible using this composite material after radioactive Cs⁺ ion adsorption. The existence of nanosized magnetites in the polycrystalline zeolite (several micrometers) was confirmed by TEM observations. The CEC and magnetic property of these composite materials were characterized.     

Metal adhesive properties of polyamides having the 2,3‐bis(1,4‐phenylene)quinoxalinediyl structure

Polyamides were synthesized by interfacial polycondensation of 2,3‐bis(4‐chloroformylphenyl)quinoxaline (BCFPQ) and several aliphatic diamines using a phase transfer catalyst, and their adhesive property for stainless steel was investigated. The inherent viscosity of the obtained polyamides ranged from 0.37 to 1.24 dL g⁻¹. The glass transition temperatures of the polyamides ranged between 154 and 201°C, and their thermal decomposition temperatures were above 450°C. The polyamides were soluble in several organic solvents, including m‐cresol, N‐methyl‐2‐pyrrolidone (NMP), and formic acid. The adhesive property for stainless steel was examined by a standard tensile test. One member of the series, polyamide P8, derived from BCFPQ and 1,8‐octanediamine, displayed high tensile strength with values of 232 kgf cm⁻² at 20°C, 173 kgf cm⁻² at 120°C, and 137 kgf cm⁻² at 180°C. Thus, the tensile strength of P8 decreased at 180°C, but the decrease was much smaller than that of an epoxy resin in wide use as a metal adhesive. Heat distortion temperature, measured by thermal mechanical analysis, of P8 was 191°C. This suggested that P8 possessed high thermal resistance in metal adhesives. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 1366–1370, 1999     

Flexible learning and use of multiple-landmark information by pigeons (Columba livia) in a touch screen-based goal searching task.

Three touch screen-based experiments were conducted to investigate whether pigeons would learn to use configural information about a goal's location in relation to a multiple-landmark array. In Experiment 1, 4 pigeons (Columba livia) were trained to peck a computer monitor at a location that constituted the third vertex of a hypothetical triangle defined by 2 different landmarks. The landmarks appeared in 3 orientations during the training, and the pigeons' goal-searching ability easily transferred to the landmarks presented in 3 novel orientations. Each landmark was asymmetric, so we next examined whether the pigeons used (a) the small-scale, local orientation information that could be inferred from each landmark individually, or (b) the large-scale, configural information that could be inferred from the spatial arrangement of multiple landmarks taken as a whole. Even when each single landmark appeared by itself, the pigeons were able to locate the goal accurately, suggesting that the large-scale, configural information was not essential. However, when 1 landmark locally pointed to a location that was consistent with the triangular configuration and the other landmark locally pointed to a different location, the pigeons predominantly pecked at the configurally array-consistent location. These results suggest that the pigeons redundantly learned both the large-scale, configural strategy and the local, single-landmark strategy, but they mainly used the latter information, and used the former information solely to disambiguate conflicts when the 2 landmarks pointed toward different targets. Such flexible learning and use of redundant information may reflect the pigeons' adaptation to unstable wild environments during their evolutionary history. (PsycINFO Database Record (c) 2011 APA, all rights reserved)