Area and volume effects on breakdown strength in liquid nitrogen

We measured dc and ac breakdown voltages in liquid nitrogen (LN ₂) with a sphere-to-plane electrode configuration. Experimental results revealed that the breakdown voltage in LN₂ did not increase monotonously but partially decreased as the sphere diameter increased at a constant gap length. Thus, the existence of the area and the volume effects on the breakdown voltage in LN₂ was verified quantitatively; the breakdown strength decreased when increasing the {SEA}₉₀ (90% stressed electrode area) and the {SLV}₉₀ (90% stressed liquid volume). By changing the experimental conditions, it was verified that both area and volume effects, having a mutual correlation, simultaneously lead to the degradation of the breakdown strength in LN₂. In order to examine the area and the volume effects for the larger {SEA}₉₀ and {SLV}₉₀, we also measured the breakdown voltage with a coaxial cylindrical electrode. It was concluded that the dc and ac breakdown strengths in LN₂ decreased as the {SEA}₉₀ and the {SLV}₉₀ increased varying widely from 10⁰ to 10⁵ mm² and from 10 ^-1 to 10⁵ mm³, respectively     

Coupling-loss reduction of a vertically coupled microring resonator filter by spot-size-matched busline waveguides

To improve the input-output coupling loss of a vertically coupled microring resonator filter, we fabricated microring resonators on an antiresonant reflecting optical waveguide (ARROW) with a large spot size and on the rectangular busline waveguide with a spot-size transformer. The spot size and the tapered structure were optimally designed from the viewpoint of spot-size matching to single-mode fibers and the reduction of radiation loss. Clear dropping responses were demonstrated for the ARROW-based microring resonator filters, and the coupling loss was successfully reduced by 22 dB.     

An Interactive Deformation System for Granular Material

Computer Graphics (CG) animations of natural phenomena are currently widely used for movies and in video games. Granular materials occur widely in nature, and therefore it is necessary that CG animations represent ground surfaces composed of a granular material as well as model deformations when the granular material comes into contact with other physical rigid objects (called solid objects). In this paper, we propose a deformation algorithm for ground surfaces composed of granular material. The deformation algorithm is divided into three steps: (1) detection of the collision between a solid object and the ground surface, (2) displacement of the granular material and (3) erosion of the material at steep slopes. The proposed algorithm can handle solid objects of various shapes, including concave polyhedra by additionally using a layered data structure called the Height Span Map. Furthermore, a texture sliding technique is presented to render the motion of granular materials. In addition, our implementation of the deformation algorithm can be used at interactive frame rates.     

Glare Generation Based on Wave Optics

This paper proposes a novel and general method of glare generation based on wave optics. A glare image is regarded as a result of Fraunhofer diffraction, which is equivalent to a 2D Fourier transform of the image of given apertures or obstacles. In conventional methods, the shapes of glare images are categorized according to their source apertures, such as pupils and eyelashes and their basic shapes (e.g. halos, coronas, or radial streaks) are manually generated as templates, mainly based on statistical observation. Realistic variations of these basic shapes often depend on the use of random numbers. Our proposed method computes glare images fully automatically from aperture images and can be applied universally to all kinds of apertures, including camera diaphragms. It can handle dynamic changes in the position of the aperture relative to the light source, which enables subtle movement or rotation of glare streaks. Spectra can also be simulated in the glare, since the intensity of diffraction depends on the wavelength of light. The resulting glare image is superimposed onto a given computer‐generated image containing high‐intensity light sources or reflections, aligning the center of the glare image to the high‐intensity areas. Our method is implemented as a multipass rendering software. By precomputing the dynamic glare image set and putting it into texture memory, the software runs at an interactive rate.     

Crystallographic Orientation Dependence of the Schottky Properties of Au/SrTiO3 Junctions

Crystallographic orientation dependence of the Schottky properties of Au/Nb-doped SrTiO₃ (STO:Nb) junctions has been investigated using single crystals of STO:Nb (1 0 0) and (1 1 1). It is found from electrical properties that the Schottky barrier height (SBH) of the Au/STO:Nb junctions estimated from current density (J)-voltage (V) characteristics shows crystallographic orientation dependence, while the flat band voltage estimated from capacitance (C)-voltage (V) characteristics is independent of the orientation. Displacement currents originated from the junction capacitance have been clearly observed at reverse bias voltage even in a condition of dV/dt 8.75 × 10^–3 [V/s] because of large electrostatic permittivity of the STO, and the displacement currents also showed crystallographic orientation dependence. The different response in the electrical properties of the Schottky junctions suggests that electric properties of intrinsic low permittivity layers, which exist at Au/STO:Nb interfaces, have the crystallographic orientation dependence.     

Solubility and diffusivity of oxygen in aqueous sucrose solutions

Solubility and diffusivity of oxygen in aqueous sucrose solutions of various concentrations were measured at temperatures from 15° to 45°C and at atmospheric pressure. The solubility of oxygen could be correlated well by the method of van Krevelen and Hoftijzer. The diffusivity of oxygen was found to be proportional to the ?2/3 power of the viscosity of the solution.     

Velocity, electromechanical coupling factor and acoustic loss of surface shear waves propagating along x-axis on rotated Y-cut plates of LiNbO3

Velocity and propagation loss of surface shear waves are measured on free-space and metallised surfaces of LiNbO3 crystals along the x-axis of rotated Y-cut plates as a function of rotation about the x-axis between 35° and 70°. The coupling factor obtained from the velocities is 0.20 for a 35° rotated Y-cut plate and 0.09 for a 70° plate. The coupling factor changes linearly with the rotation angle. The propagation losses over the whole range measured here are less than 5 dB/cm on both free-space and on metallised surfaces. These losses are fairly low and very favourable for fabricating s.a.w. filters.     

Simple determination of residual anticoccidial drugs (diclazuril and nicarbazin) in chicken tissues by HPLC

A simple and rapid determination of anticoccidial drug residues, diclazuril (DCZ) and nicarbazin (NCZ), in chicken tissues has been developed. DCZ and NCZ were extracted with acetonitrile from chicken liver, muscle, and fat. The extract was rinsed with n-hexane saturated with acetonitrile and then evaporated. The residue was dissolved in 1.4 mL of acetonitrile-methanol (1:1), then 1.0 mL of n-hexane saturated with acetonitrile-methanol (1:1) was added, and the mixture was partitioned by the addition of 0.6 mL of water. DCZ and NCZ in the aqueous layers were determined by HPLC on an Xterra RP-18 column with acetonitrile-0.5% ammonium acetate containing 0.01 mol/L tetra-n-butylammonium hydrogen sulfate (43:57) as the mobile phase. The mean recoveries (n = 5) of DCZ and NCZ spiked in chicken tissues at the maximum residue levels were 92.0-95.6% (CV 2.4-3.0%) and 87.3-89.4% (CV 1.7-2.8%), respectively. The detection limits of DCZ and NCZ were 0.01 and 0.004 microgram/g, respectively.     

Analysis of protein adsorption and binding at biosensor polymer interfaces using X-ray photon spectroscopy and scanning electrochemical microscopy

We describe a method, based on X-ray photoelectron spectroscopy (XPS) measurements, to assess the extent of protein adsorption or binding on a variety of different muTAS and biosensor interfaces. Underpinning this method is the labeling of protein molecules with either iodine- or bromine-containing motifs by using protocols previously developed for radiotracer studies. Using this method, we have examined the adsorption and binding properties of a variety of modified electrodeposited polymer interfaces as well as other materials used in muTAS device fabrication. Using polymer interfaces modified with poly(propylene glycol) (PPG) chains, our results indicate that a chain of at least approximately 30 monomer units is required to inhibit nonspecific adsorption from concentrated protein solutions. The XPS methodology was also used to probe specific binding of avidins and enzyme conjugates thereof to biotinylated and mixed biotin/PPG-modified polymer interfaces. In one example, using competitive binding, it was established that the mode of binding of a peroxidase-streptavidin conjugate to a biotinylated modified polymer interface was primarily via the streptavidin moiety (as opposed to nonspecific binding via the enzyme conjugate). XPS evaluation of nonspecific and specific peroxidase-streptavidin immobilization on various functionalized polymers has guided the design and fabrication of functionalized interdigitated electrodes in a biosensing muTAS device. Subsequent characterization of this device using scanning electrochemical microscopy (SECM) corroborated the adsorption and binding previously inferred from XPS measurements on macroscale electrodes.