Effect of nanosilica on the thermal,mechanical, and dielectric properties of polyarylene ether nitriles terminated with phthalonitrile

Nanosilica/polyarylene ether nitriles terminated with phthalonitrile (SiO₂/PEN‐t‐Ph) composites were prepared by hot‐press approach. To ensure the nano‐SiO₂ can disperse uniformly, the solution casting method combined with ultrasonic dispersion technology had been taken previously. The mass fraction of nano‐SiO₂ particles was varied to investigate their effect on the thermal, mechanical, and dielectric properties of the nanocomposites. From scanning electron microscope images, it was found that the nanoSiO₂ particles were dispersed uniformly in the PEN‐t‐Ph matrix when the addition of nano‐SiO₂ was less than 16.0 wt%. However, when the mass fraction of nano‐SiO₂ increased to 20.0 wt%, the nano‐SiO₂ particles tend to self‐aggregate and form microns sized particles. Thermal studies revealed that nano‐SiO₂ particles did not weaken the thermal stabilities of the PEN‐t‐Ph matrix. Mechanical investigation manifested that the SiO₂/PEN‐t‐Ph nanocomposites with 12.0 wt% nano‐SiO₂ loading showed the best mechanical performance with tensile strength of 108.2 MPa and tensile modulus of 2107.5 Mpa, increasing by 14% and 19%, respectively as compared with the pure PEN‐t‐Ph film. Dielectric measurement showed that the dielectric constant increased from 3.70 to 4.15 when the nano‐SiO₂ particles varied from 0.0 to 20.0 wt% at 1 kHz. Therefore, such composite was a good candidate for high performance materials at elevated temperature environment. POLYM. COMPOS., 35:344–350, 2014. © 2013 Society of Plastics Engineers     

Fabrication of functionally graded nano‐TiO2‐reinforced epoxy matrix composites

Functionally graded nano‐TiO₂ epoxy matrix composites were successfully fabricated using a centrifugal method. In the preparation of the composite, the aggregation of nano‐TiO₂ occurred during curing, which had a negative effect on the composite performance. To solve this problem, we introduced a silane coupling agent to modify the surface of the nano‐TiO₂, thereby improving the performance and mechanical properties simultaneously. The modified nano‐TiO₂ (s‐TiO₂) had better dispersion in the epoxy resin, making it possible to produce depth gradients of the mechanical properties of functionally graded materials (FGMs). The s‐TiO₂ was characterized with respect to functional groups, morphology, and chemical elements using transmission electron microscopy, X‐ray photoelectron spectroscopy, and Fourier‐transform infrared spectroscopy. The results show that a silane layer was successfully coated on the surface. Also, the gradients of the mechanical and permittivity properties of the FGM indicated that by modifying the surface of the nano‐filler, it is possible to fabricate nano‐filler‐reinforced epoxy matrix FGMs using a centrifugal method. POLYM. COMPOS., 35:557–563, 2014. © 2013 Society of Plastics Engineers     

Modification of sisal fiber by in situ coating steam explosion and electromagnetic interference shielding effectiveness of sisal fiber/PP composites

The technology of steam explosion was adopted to modify sisal fiber (SF) material and two different carbon particles, expanded graphite and conductive carbon black (CCB), were in situ coated on the surface of SF during steam explosion process. The DC conductivity and electromagnetic interference shielding effectiveness (SE) of the modified SF/polypropylene (PP) composites were studied and the measurement of electromagnetic interference (EMI) SE was conducted in two frequency ranges of 400–1,000 MHz and 1–18 GHz. The experimental results showed that this novel coating technology could improve the SE of the modified SF/PP composites significantly, which has a strong dependence on the loadings of the expanded graphite modified sisal fiber (SF‐EG) and conductive carbon black modified sisal fiber (SF‐CCB). When the loadings of SF‐EG and SF‐CCB reached 50 wt%, the maximum values of the SE were 33 dB and 51 dB, respectively. For the modified SF/PP composites, the experimental EMI SE values are in good correlation with the theoretical calculation values in far field of electromagnetic radiation. POLYM. COMPOS., 35:1038–1043, 2014. © 2013 Society of Plastics Engineers     

[Hmim][HSO4], a Green and Recyclable Acidic Ionic Liqiud Medium for the One‐Pot Nitration of TADB to HNIW

An efficient and mild procedure for the one‐pot preparation of CL‐20 from TADB in the presence of the Brønsted acidic ionic liquid 1‐methylimidazolium hydrogen sulfate [Hmim][HSO₄] as catalyst was developed. The ionic liquid was stable during the reaction process and could also be reused several times with steady activity. In order to optimize the process parameters to obtain higher yield and purity, a study was carried out with variation of the ionic liquids and some parameters like temperature, mole ratio of [Hmim][HSO₄] and nitric acid. This procedure may be a practical alternative to the existing procedures to meet the nees of academics as well as industry.     

Insight into the intraparticle diffusion of residue oil components in catalysts during hydrodesulfurization reaction

Well‐defined and uniform pore structure catalysts were used to study the intraparticle diffusion of fractionated Saudi vacuum residue under hydrodesulfurization (HDS) reaction conditions. HDS rates of residue oil cuts with different molecular weights are determined as functions of pore size, temperature, and pressure in a trickle‐bed reactor. Credible intrinsic and bulk diffusivities of organosulfur compounds in residue oil were obtained for the first time, from the apparent and intrinsic reaction kinetic constants. Intrinsic diffusivities ranged from 2 × 10^?7 to 8 × 10^?7 cm²/s for the residual oil molecules; diffusivity decreases with increasing molecular weight of the residual oil. The intrinsic diffusivity for molecular weights ～1000 Daltons increases with pore size for pores <70 nm, but is nearly independent of pore size for pores >70 nm. The diffusivity dependences on pore size and molecular weight suggest that the onset of restricted diffusion occurs for ratios of molecular diameter to pore diameter of ～0.04. © 2014 American Institute of Chemical Engineers AIChE J, 60: 3267–3275, 2014     

Ionic liquid recovery alternatives in ionic liquid‐based three‐phase partitioning (ILTPP)

Ionic liquid‐based three‐phase partitioning (ILTPP) is a promising technique to recover high‐added value proteins at the liquid–liquid interface. Its economic and environmental performance highly depends on the net ionic liquid consumption. Alternatives to maximize the fraction of ionic liquid that can be recycled are studied. It is demonstrated that the addition of extra salt, previously proposed in literature, has a very limited effect on ionic liquid recovery for relatively high protein concentrations in the feed stream, and that it may even lead to an increase of the ionic liquid losses under certain conditions. However, small additions of salt are shown to be effective and profitable from an economic point of view. Vacuum evaporation is shown to allow for the complete ionic liquid and salt recovery, reinforcing the sustainability and viability of ILTPP processes. © 2014 American Institute of Chemical Engineers AIChE J, 60: 3577–3586, 2014     

An approach to mechanistic event recognition applied on monitoring organic matter depletion in SBRs

A fundamental practice in process engineering is monitoring the state dynamics of a system. Unfortunately, observability of some states is related to high costs, time, and efforts. The mechanistic event recognition (MER) aims to detect an event (defined as a change of the system with specific significance to the operation of the process) that cannot be directly observed but has some predictable effect on the dynamics of the systems. MER attempts to apply fault diagnosis techniques using mechanistic “recognition” models to describe the process. A systematic method for building recognition models using optimal experimental design tools is presented. As proof of concept, the MER approach to detect organic matter depletion in sequencing batch reactors, measuring only ammonia, dissolved oxygen, and nitroxides is applied. The event, that is, consumption of organic matter to a level below 50 gCOD/m³, was successfully detected even though microbial activity is known to continue after organic matter depletion. © 2014 American Institute of Chemical Engineers AIChE J, 60: 3460–3472, 2014     

The solution behavior of hydrophobically associating zwitterionic polymer in salt water

The acrylamide‐based hydrophobically associating zwitterionic polymer was prepared, which was composed of dimethyl‐dodecyl‐allyl ammonium chloride as hydrophobic group and carboxyl betaine 2‐(4‐acrylamido‐propyl‐dimethyl ammonic)‐sodium acetate as functional group. Hydrophobically associating polyacrylamide (HAPAM) was also prepared for comparative study. The behaviors of polymers in pure water and salt solutions were investigated by the means of apparent viscosity test, laser light scattering, atomic force microscope, and fluorescence experiments. The viscosities of polymer solution increased with the increasing of salt concentration, which indicated that the addition of salt resulted in significant antipolyelectrolyte effect in the zwitterionic polymer solution. The results of dynamic laser light scattering experiment also showed that the average hydrodynamic diameters of the zwitterionic polymer molecules increased with the increasing of salt concentration. The network structures had been observed by atomic force microscope and the addition of salt strengthened the formation of network structures. The results of fluorescence experiment showed that the addition of salt could enhance the association of hyrophobically zwitterionic polymer. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39707.     

Preparation of chitosan‐g‐poly(acrylamide)/montmorillonite superabsorbent polymer composites: Studies on swelling,thermal, and antibacterial properties

Superabsorbent composites based on chitosan‐g‐poly(acrylamide) and montorillonite (CTS‐g‐PAAm/MMT) were synthesized through in situ radical polymerization by grafting of crosslinked acrylamide onto chitosan backbone in presence of MMT at different contents. The formation of the grafted network was confirmed by attenuated total reflectance Fourier transform infrared spectroscopy (ATR‐FTIR), thermogravimetric analysis (TGA), and differential scanning calorimetery (DSC). The obtained porous structure was observed by scanning electron microscope (SEM). The presence of clay and its interaction with chitosan‐g‐poly(acrylamide) (CTS‐g‐PAAm) matrix was evidenced by ATR‐FTIR analysis. The morphology was investigated by both X‐ray diffraction (XRD) and SEM analyses. It was suggested the formation of mostly exfoliated structures with more porous structures. Besides, the thermal stability of these composites, observed by TGA analysis, was slightly affected by the clay loading as compared to the matrix. These hydrogel composites were also hydrolyzed to achieve anionic hydrogels with ampholytic properties. Swelling behaviors were examined in doubly distilled water, 0.9 wt % NaCl solution and buffer solutions. The water absorbency of all superabsorbent composites was enhanced by adding clay, where the maximum was reached at 5 wt % of MMT. Their hydrolysis has not only greatly optimized their absorption capacity but also improved their swelling rate and salt‐resistant ability. The hydrolyzed superabsorbent showed better pH‐sensitivity than the unhydrolyzed counterparts. The results of the antibacterial activity of these superabsorbents composites against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli), assayed by the inhibitory zone tests, have showed moderate inhibition of the bacteria growth. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39747.     

Electrical properties and the role of inhomogeneities at the polyvinyl alcohol/n‐inp schottky barrier interface

In this work, we have investigated the electrical properties of Au/n‐InP contacts with a thin layer of polyvinyl alcohol (PVA) as an interlayer. The current–voltage (I–V) and capacitance–voltage (C–V) measurements are carried out in the temperature range of 175–425 K. The Au/PVA/n‐InP Schottky structure show nonideal behaviors and indicates the presence of a nonuniform distribution of interface states. The temperature dependent interface states densities (N_SS), ideality factor and barrier height are obtained. An abnormal decrease in zero‐bias barrier height (BH) and increase in the ideality factor ( ) with decreasing temperature have been explained on the basis of the thermionic emission theory with Gaussian distribution (GD) of the BHs due to the BH inhomogeneities. The experimental I–V characteristics of Au/PVA/n‐InP Schottky diode has revealed the existence of a double GD with mean BH values of ( ) of 1.246 and 0.899 eV and standard deviation ( ) of 0.176 and 0.137 V, respectively. Consequently, the modified conventional activation energy versus plot gives and Richardson constants ( ) and the values are 1.17 and 0.71 eV and 9.9 and 6.9 A/cm² K², respectively, without using the temperature coefficient of the BH. The effective Richardson constant value of 9.9 A/cm² K² is very close to the theoretical value of 9.4 A/cm² K² for n‐InP. The discrepancy between Schottky barrier heights estimated from I–V and C–V measurements is also discussed. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39773.