Theoretical foundation of the 80/20 rule

A rigorous analysis of the 80/20 rule is made using an index for the observed values of the variables. Three important findings are identified. First, a sufficient condition is provided for Burrell's inverse relationship between minimum holdings and average circulation rate. Second, an indexed version of Lotka's law is used to derive a sufficient condition for Egghe's finding on the 80/20 rule. Third, through the computer simulations of the Simon-Yule model of Lotka's law, we identify the entry rate of new holdings as well as the number of circulations when the entry rate is a decreasing function to be crucial factors for the pattern of the 80/20-type curve.     

Mobility modeling, location tracking, and trajectory prediction inwireless ATM networks

Wireless ATM networks require efficient mobility management to cope with frequent mobile handoff and rerouting of connections. Although much attention has been given in the literature to network architecture design to support wide-area mobility in public ATM networks, little has been done to the important issue of user mobility estimation and prediction to improve the connection reliability and bandwidth efficiency of the underlying system architecture. This paper treats the problem by developing a hierarchical user mobility model that closely represents the movement behavior of a mobile user, and that, when used with appropriate pattern matching and Kalman filtering techniques, yields an accurate location prediction algorithm, HLP, or hierarchical location prediction, which provides necessary information for advance resource reservation and advance optimal route establishment in wireless ATM networks     

安居水电厂灯泡贯流式水轮发电机组的试运行

本文对安居水电厂2台灯泡贯流式水轮发电机组自投入试运行以来,出现的受油器壳体开裂、导叶接力器缸体和活塞拉伤、转轮桨叶传动拐臂连接销脱落、导叶外轴承座漏水、主轴工作密封漏水侵入水导轴承、锁锭装置固定螺钉剪断等故障的经过、原因分析及其处理办法进行了叙述。     

Analysis of adhesive bonded composite lap joints with transverse stitching

The effect of transverse stitching on the stresses in the adhesive is investigated using an adhesive sandwich model with nonlinear adhesive properties and a transverse stitching model for adhesive bonded composite single-lap and double-lap joints. Numerical results indicate that, among all stitching parameters, thread pretension and stitch density have significant effect on the peel stresses in the adhesive; increase in the thread pretension and the stitch density leads to a decrease in peel stress in the adhesive, while an increase in other parameters generally results in a negligible reduction in peel stress. The effect of stitching was found to be negligible on the shear stresses in the adhesive. Thus it is concluded that stitching is effective for the joints where peel stresses are critical and ineffective for those where shear stresses are critical.     

数字程控交换机与专网中的多媒体通信

本文以一个多媒体通信应用VISIT为实例,介绍了多媒体通信在数字程控交换机及专网中的应用情况。     

客户机／服务器计算环境

本文介绍了客户机／服务器计算环境的基本概念和产生背景，阐述了客户机／服务器计算中操作系统的选择原则及企业级客户机／服务器计算环境的特点。     

Angiotensin II regulates the expression of plasminogen activator inhibitor-1 in cultured endothelial cells. A potential link between the renin-angiotensin system and thrombosis

Plasminogen activator-inhibitor C-1 (PAI-1) plays a critical role in the regulation of fibrinolysis, serving as the primary inhibitor of tissue-type plasminogen activator. Elevated levels of PAI-1 are a risk factor for recurrent myocardial infarction, and locally increased PAI-1 expression has been described in atherosclerotic human arteries. Recent studies have shown that the administration of angiotensin converting enzyme inhibitors reduces the risk of recurrent myocardial infarction in selected patients. Since angiotensin II (Ang II) has been reported to induce PAI-1 production in cultured astrocytes, we have hypothesized that one mechanism that may contribute to the beneficial effect of angiotensin converting enzyme inhibitors is an effect on fibrinolytic balance. In the present study, we examined the interaction of Ang II with cultured bovine aortic endothelial cells (BAECs) and the effects of this peptide on the production of PAI-1. 125I-Ang II was found to bind to BAECs in a saturable and specific manner, with an apparent Kd of 1.4 nM and Bmax of 74 fmol per mg of protein. Exposure of BAECs to Ang II induced dose-dependent increases in PAI-1 antigen in the media and in PAI-1 mRNA levels. Induction of PAI-1 mRNA expression by Ang II was not inhibited by pretreating BAECs with either Dup 753 or [Sar1, Ile8]-Ang II, agents that are known to compete effectively for binding to the two major angiotensin receptor subtypes. These data indicate that Ang II regulates the expression of PAI-1 in cultured endothelial cells and that this response is mediated via a pharmacologically distinct form of the angiotensin receptor.     

Prediction of fatigue screw loosening in anterior spinal fixation using dual energy x-ray absorptiometry

STUDY DESIGN: A biomechanical study was performed to investigate a relation between the bone mineral density of the vertebral body and the number of loading cycles to induce fatigue loosening of an anterior vertebral screw. OBJECTIVES: The objective of this study was to investigate the potential usefulness of dual energy x-ray absorptiometry of measuring bone mineral density of the vertebral body in predicting the fatigue loosening of th anterior vertebral screw. SUMMARY OF BACKGROUND DATA: Loosening of the vertebral body screw is a well know failure in spinal instrumentation, and more commonly observed than pullout failure. The relation between bone mineral density and pullout strength of the screw has been investigated previously, but no studies are available on the fatigue loosening in anterior spinal fixation. METHODS: Bone mineral density was measured using dual energy x-ray absorptiometry and the screw loosening was produce by a cyclic loading in the cephalad-caudal direction. Screw loosening was defined as 1 mm displacement of the screw relative to bone, and the number of loading cycles to induce the screw loosening was obtained and statistically correlated with bone mineral density. RESULTS: There was a positive correlation between the number of loading cycles to induce screw loosening and bone mineral density (R = 0.8, P < 0.01). The average number of loading cycles to induce screw loosening was significantly less for specimens with bone mineral density < 0.45 g/cm2 compared to those with bone mineral density > or = g/cm2. CONCLUSIONS: These findings suggest that bone mineral density may be a good predictor of anterior vertebral screw loosening. Bone mineral density < 0.45 g/cm2 may be critical value of loosening of the anterior vertebral body screw. However, further biomechanical and clinical studies are required before using threshold value clinically.     

Electrochemical Investigation on the Formation of Dy-Fe Alloy in Molten Chlorides

ＥｌｅｃｔｒｏｃｈｅｍｉｃａｌＩｎｖｅｓｔｉｇａｔｉｏｎｏｎｔｈｅＦｏｒｍａｔｉｏｎｏｆＤｙＦｅＡｌｏｙｉｎＭｏｌｔｅｎＣｈｌｏｒｉｄｅｓＬｉｕＧｕａｎｋｕｎ（刘冠昆），ＴｏｎｇＹｅｘｉａｎｇ（童叶翔），ＨｏｎｇＨｕｉｃｈａｎ（洪惠婵），Ｙａｎｇ...     

Characterization of dibromopolychlorodibenzo-p-dioxins and dibromopolychlorodibenzofurans in municipal waste incinerator fly ash using gas chromatography/mass spectrometry.

Several fly ash samples from different countries were analyzed for dibromopolychlorodibenzo-p-dioxins and -dibenzofurans (DBPCDD/Fs) using capillary column gas chromatography/high-resolution mass spectrometry. Concentrations of these compounds ranged from low to high parts-per-trillion (pptr) depending on the location where the samples were collected. The mass spectrometer, operated at greater than 10,000 mass resolution in combination with the high resolving power of capillary column GC, permitted characterization of DBPCDD/Fs in municipal waste incinerator fly ash for the first time. The isomer patterns of tetra- through octa-congener groups of DBPCDD/Fs are remarkably similar regardless of where the fly ash originated, indicating common mechanisms of formation of these compounds in the incinerators.