Stretchable,Antifreezing, Non-Drying,and Fast-Response Sensors Based on Cellulose Nanocomposite Hydrogels for Signal Detection

Conductive hydrogels have received widespread attention in the applications of biosensors, human–machine interface, and health recording electrodes. Herein, the conductive hydrogels integrated with antifreezing, water retention, reusable, and sensing performances are fabricated by introducing polyvinyl alcohol, cellulose nanofibril, MXene nanosheets, and glycerol. The as-prepared hydrogels present prominent electrical conductivity (2.58 mS cm⁻¹) and flexibility even at −18 °C. In addition, the hydrogels have favorable water retention performance and can reuse after heating and cooling. When used as sensors, the hydrogels illustrate high sensitivity (gauge factor of 2.30), fast response time (0.165 s), wide working strain range (559%), favorable linearity (R² = 0.999), and wide operating temperature range (−18 to 60 °C). The hydrogels can detect not only large strains of 10–200%, but also small strains of 1–5%, making them promising candidates for wearable sensors to monitor large and subtle movements.     

含储能型虚拟同步发电机的直驱风机并网系统自适应协调阻尼控制策略

储能型虚拟同步发电机(VSG)的灵活控制特性能够为风电并网系统提供有效的频率和电压支撑,然而系统振荡特性会受到一定程度的影响,同时风电时变出力特性导致的运行点变化也将使得定参数阻尼控制表现出适应性不足的问题.为此,提出了适应风电出力时变特性的自适应协调阻尼控制策略.首先,在风电并网系统状态空间模型的基础上推导线性变参数模型,以直驱风机的有功功率为调度变量,根据稳定域确定运行空间范围;然后,利用间隙度量对运行空间进行划分,确定各子运行空间的典型运行点并将其作为多胞形顶点,建立调度增益与系统运行工况以及控制器的映射关系;最后,针对不同频率振荡模式协调设计自适应控制器.测试系统的仿真结果表明,所设计的自适应协调阻尼控制器不仅能够同时阻尼含储能型VSG并网系统中的次同步振荡和低频振荡,也能在风电出力大范围时变工况下保持良好的阻尼水平.     

低熔点Cu-P基中间合金及其变质效果

利用差示扫描量热仪(DSC)、扫描电子显微镜(SEM)和金相显微镜等手段对Cu-P基中间合金进行了研究。结果表明，在二元共晶Cu-P中间合金中加入一定量的Sn可制成低熔点的Cu-16Sn-8P中间合金；在此基础上研制出一种熔点为630℃左右的低熔点的多元Cu-P基中间合金。与Cu-P中间合金相比，该低熔点多元Cu-P基中间合金对过共晶AI-24Si合金具有更好的变质效果。同时，该中间合金对ZL109合金也具有良好的变质效果。     

Ce对过共晶Al—Si合金熔体粘滞性和结构的影响

研究了Ce对Al—16％Si合金熔体粘滞性的影响。结果表明：Ce的加入增加了合金熔体的粘度，且随着Ce含量的增加粘度值也增加。结合加入Ce的Al—16％Si合金氢含量的变化、凝固组织和DSC曲线研究了熔体结构的变化，分析了粘度与液态结构变化之间的关系。     

应用BP神经网络的单机架可逆式冷轧机弯辊力预设定

针对单机架可逆式冷轧机生产过程中，由于不同热轧生产厂的热轧板形原料性能、板形差别较大、从而造成弯辊力预设定值和实际指标相差较大的问题，利用现场生产工艺数据丰富，采用人工智能BP神经网络的方法，通过大量数据输入进行训练，大大的提高了生产过程中弯辊力预设定值的准确性。     

Ni3Al合金中晶界与位错交互作用的研究

运用嵌入原子法势函数和静态驰豫最陡梯度的计算方法,原子模拟了Ni_3Al合金中晶界与位错的交互作用.主要研究了晶界与位错交互作用的能量特征、晶界结构单元的畸变行为和晶界附近位错的核心结构,并分析讨论了各种因素对它们的影响以及与Ni_3Al晶界韧脆行为之间的关系     

机床的静压系统及润滑

对机床的静压系统及其发展过程进行了综述 ,介绍了静压系统的基本结构、特点及其在机床中的各种运用。     

Effect of processing on sphingolipid content in soybean products

Soybeans are believed to be a rich source of sphingolipids, a class of polar lipids that has received attention for their possible cancer-inhibiting activities. The effect of processing on the sphingolipid content of various soybean products has not been determined. Glucosylceramide (GlcCer), the major sphingolipid type in soybeans, was measured in several processed soybean products to illustrate which product(s) GlcCer is partitioned into during processing and where it is lost. Whole soybeans were processed into full-fat flakes, from which crude oil was extracted. Crude oil was refined by conventional methods, and defatted soy flakes were further processed into alcohol-washed and acid-washed soy protein concentrates (SPC) and soy protein isolates (SPI) by laboratory-scale methods that simulated industrial practices. GlcCer was isolated from the samples by solvent extraction, solvent partition, and TLC and was quantified by HPLC. GlcCer remained mostly within the defatted soy flakes (91%) rather than in the oil (9%) after oil extraction. Only 52, 42, and 26% of GlcCer from defatted soy flakes was recovered in the acid-washed SPC, alcohol-washed SPC, and SPI products, respectively. All protein products had a similar GlcCer concentration of about 281 nmol/g (dry wt basis). The minor quantity of GlcCer in the crude oil was almost completely removed by water degumming.     

Study on Tribological Properties of Polytetrafluoroethylene Drawn Uniaxially at Different Temperature

Summary: Wear behavior correlations with morphology have been established from polytetrafluoroethylene (PTFE) drawn at 200, 327, and 375 °C with draw ratio about 4. The friction coefficient and wear rate for PTFE drawn at 327 °C are lower and the wear rate is lower than that of undrawn PTFE by about 30%. The structures of samples were characterized by scanning electron microscope (SEM), DSC, and wide angle X‐ray diffraction (WAXD). Results indicate that the debris morphologies of samples are different. The differences in the tribological behavior of undrawn and drawn samples were attributed to the improvement of the degree of the crystalline, fibrillation, and orderliness by drawing, especially, for PTFE drawn at 327 °C. The orderliness of molecular arrangement along the drawn direction is also higher for PTFE drawn at 327 °C than those of PTFE drawn at 200 and 375 °C, respectively. Therefore, the intensity of covalent bond along drawn direction is higher. The shear resistance and the deformability of the material are greatly improved and the size of the wear breakage unit decreases, which results in a good tribological property for PTFE drawn at 327 °C.

SEM morphology of fractured surface perpendicular to the draw direction for PTFE drawn at 327 °C.     

有机试剂结构与性质的研究：Ⅻ.有机试剂的pKa与改进的Hammett方程

有机试剂的ｐＫａ是其重要物化参数，是有机试剂酸碱性的度量，直接决定配合物的稳定性。应用改进的Ｈａｍｍｅｔｔ方程处理取代基常数与ｐＫａ的关系，得到满意的结果。