Statistical estimation of average power dissipation usingnonparametric techniques

In this paper, we present a new statistical technique for estimation of average power dissipation in digital circuits. The present parametric statistical technique estimates the average power based on the assumption that the power distribution can be characterized by a preassumed function. Large error can incur when the assumption is not met. On the other hand, the existing nonparametric technique, although accurate, is too conservative and requires a large sample size in order to achieve convergence. For a good tradeoff between simulation accuracy and computational efficiency, we propose a new nonparametric technique using the properties of the order statistics. It is generally applicable to any type of circuit irrespective of its power distribution function. Compared to the existing nonparametric technique, it is much more computationally efficient since it requires a much smaller sample size to achieve the same accuracy specification. This new technique is implemented in the distribution-independent power estimation tool (DIPE). DIPE is empirically demonstrated to be more robust and accurate than the parametric technique     

AFA 3G燃料棒下端塞电子束焊产生气胀的分析

宜宾核燃料元件厂在AFA 3G燃料棒首次产品合格性鉴定中发现，大批下端环缝焊产生了气胀的焊接缺陷。本文分析了产生气胀缺陷的原因，并介绍了针对其原因进行的各种试验。结果表明，改变焊接参数，即提高焊接速度和适当控制电子束流强度，是解决燃料棒焊接气胀缺陷的最好途径。     

吸附制冷循环的热力计算及热力学评价方法探讨

在化工吸附，吸附热力学及Polanyi吸附位势理论的基础上，介绍吸附制冷基本型循环，推演其参数坐标图，进而分析，给出其主要性能指标的热力计算，然后以热力学的逆卡诺循环和内可逆三热源循环模型为指针，对此制冷循环进行考察。并结合热力计算对其热力学完善性做出评价，从而给出了吸附制冷基本型循环合适的热力学评价方法。     

Interdiffusion behavior of Hg in HgTe/CdTe superlattices grown on Cd0.96Zn0.04 Te (211)B substrates by molecular beam epitaxy

Double-crystal x-ray rocking curve (DCRC) and secondary-ion mass-spectroscopy (SIMS) measurements have been performed to investigate the effect of rapid thermal annealing on the interdiffusion behavior of Hg in HgTe/CdTe superlattices grown on Cd_0.96Zn_0.04Te (211)B substrates by molecular beam epitaxy. The sharp satellite peaks of the DCRC measurements on a 100-period HgTe/CdTe (100Å/100Å) superlattice show a periodic arrangement of the superlattice with high-quality interfaces. The negative direction of the entropy change obtained from the diffusion coefficients as a function of the reciprocal of the temperature after RTA indicates that the Hg diffusion for the annealed HgTe/CdTe superlattice is caused by an interstitial mechanism. The Cd and the Hg concentration profiles near the annealed HgTe/CdTe superlattice interfaces, as measured by SIMS, show a nonlinear behavior for Hg, originating from the interstitial diffusion mechanism of the Hg composition. These results indicate that a nonlinear interdiffusion behavior is dominant for HgTe/CdTe superlattices annealed at 190°C and that the rectangular shape of HgTe/CdTe superlattices may change to a parabolic shape because of the intermixing of Hg and Cd due to the thermal treatment.     

聚乙烯包装薄膜形变性能与微观结构的研究

采用拉伸实验，研究形变速率对聚乙烯包装薄膜力学性能的影响。采用Ｘ射线衍射方法，分析聚乙烯薄膜形变后微观结构的变化，得到了形变后材料内部的微晶尺寸和点阵畸变值。     

β－C_2S固溶体稳定的热力学研究

从热力学理论出发，利用Ｘ射线衍射定性和定量的方法，对β－Ｃ＿２Ｓ固溶体的稳定性进行了分析和研究。经热力学理论推导得出β－Ｃ＿２Ｓ稳定的热力学条件，即掺入的微量元素的化学位μ＿ｉ须小于β－Ｃ＿２Ｓ的反应自由焓△Ｇ＿β，μ＿ｉ＜△Ｇ＿β．并定量地计算出一种微量元素稳定β－Ｃ＿２Ｓ的临界掺加量为；多种微量元素对β－Ｃ＿２Ｓ的稳定性判断条件为：     

高岭土生产硫酸铝及沉淀法除铁的研究

对工业品硫酸铝的制备及沉淀法除铁的工艺进行了研究。实验结果表明，硫酸原料的质量分数可提高至６３％，用高锰酸钾作为除铁剂可除去产品中４５％～５０％的铁。     

Reliability and performance analysis of time – space – time switching networks with multiple separated space switches

Since electronic switching systems usually require very strict reliability requirements as well as good performance objectives, we need to jointly analyse the performance and reliability of switching systems. In this paper, we compare conventional time–space–time switches with single space switches with those with multiple separated space switches, from the viewpoints of reliability and performance. We consider time–space–time switching networks which consist of N incoming time switches, i.e. one NxN space switch, two (N/2)x(N/2) space switches, and four (N/4)x(N/4) space switches. We introduce a Markov reliability model to study the effect of failures and analyse the reliability and performance of three different types of switching networks in terms of average blocking probability and the mean time to unreliable operation, as we vary the offered traffic. As a result, T–S–T switching networks with multiple separated space switches exhibit better performance and reliability than those with single space switches.     

离子注入对Cr12MoV钢表面组织结构和力学性能的影响

研究了Ｃｒ１２ＭｏＶ钢离子注入层的显微组织特征及其对表面性能的影响。结果表明，离子注入使Ｃｒ１２ＭｏＶ钢的表面硬度和耐磨性能得到显著改善，且存在着一个最佳的注入剂量，约为３×１０＾１＾７Ｎ＾＋／ｃｍ＾２左右。离了注入在Ｃｒ１２ＭｏＶ钢表面层中形成了大量细小弥散的第二相粒子，并使α－Ｆｅ晶格发生严重畸变，从而引起材料表面强化。