Aggregation‐Prone Amyloid‐β⋅CuII Species Formed on the Millisecond Timescale under Mildly Acidic Conditions

Metal ions and their interaction with the amyloid beta (Aβ) peptide might be key elements in the development of Alzheimer's disease. In this work the effect of Cu^II on the aggregation of Aβ is explored on a timescale from milliseconds to days, both at physiological pH and under mildly acidic conditions, by using stopped‐flow kinetic measurements (fluorescence and light‐scattering), ¹H NMR relaxation and ThT fluorescence. A minimal reaction model that relates the initial Cu^II binding and Aβ folding with downstream aggregation is presented. We demonstrate that a highly aggregation prone Aβ ? Cu^II species is formed on the sub‐second timescale at mildly acidic pH. This observation might be central to the molecular origin of the known detrimental effect of acidosis in Alzheimer's disease.     

Kinetics of Pressure Cycling Extraction of Solute from Leaves of Mate (Ilex paraguariensis) Dispersed in Water

A set of seven extraction experiments was performed to investigate the influence of pressure cycles on the kinetics of solute removal from leaves of mate dispersed in water. The mass ratio of liquid to dry solid (40), the temperature (32°C), and time of extraction (3600?s) were not varied. Five extraction runs were under cyclic pressurization (1?cycle?=?300?s at 91.4?kPa?+?300?s at 182.8?kPa) and stirring speeds (S) of 0, 150, 500, 1500, and 2000?rpm, while the two other ones were at constant pressure (182.8?kPa) and S close to 1500 and 2000?rpm. Based on seven pairs of parameters of a reliable second-order kinetic model (R²?≥?0.967), cyclic pressurization had no effect on equilibrium and kinetics of extraction (p?>?0.05) when the role of convection on solute transfer was negligible (S?≥?500?rpm). In the stirring speed range from 500 to 2000?rpm, the operation was controlled by diffusion (Bi >?1.7?×?10³), so a transient two-dimensional diffusion model was able to describe correctly the changes of solute concentration with time. Below 500?rpm, solute transfer was governed by a combination of diffusion and convection with the external resistance to mass transfer as a function of S (16?≤?Bi?≤?28).     

Importance of a Conserved Lys/Arg Residue for Ligand/PDZ Domain Interactions as Examined by Protein Semisynthesis

PDZ domains are ubiquitous small protein domains that are mediators of numerous protein–protein interactions, and play a pivotal role in protein trafficking, synaptic transmission, and the assembly of signaling‐transduction complexes. In recent years, PDZ domains have emerged as novel and exciting drug targets for diseases (in the brain in particular), so understanding the molecular details of PDZ domain interactions is of fundamental importance. PDZ domains bind to a protein partner at either a C‐terminal peptide or internal peptide motifs. Here, we examined the importance of a conserved Lys/Arg residue in the ligand‐binding site of the second PDZ domain of PSD‐95, by employing a semisynthetic approach. We generated six semisynthetic PDZ domains comprising different proteogenic and nonproteogenic amino acids representing subtle changes of the conserved Lys/Arg residue. These were tested with four peptide interaction partners, representing the two different binding modes. The results highlight the role of a positively charged amino acid in the β1–β2 loop of PDZ domains, and show subtle differences for canonical and noncanonical interaction partners, thus providing additional insight into the mechanism of PDZ/ligand interaction.     

Inorganic precursor peroxides for antifouling coatings

Modern antifouling coatings are generally based on cuprous oxide (Cu₂O) and organic biocides as active ingredients. Cu₂O is prone to bioaccumulation, and should therefore be replaced by more environmentally benign compounds when technically possible. However, cuprous oxide does not only provide antifouling properties, it is also a vital ingredient for the antifouling coating to obtain its polishing and leaching mechanism. In this paper, peroxides of strontium, calcium, magnesium, and zinc are tested as pigments in antifouling coatings. The peroxides react with seawater to create hydrogen peroxide and highly seawater-soluble ions of the metal. The goals have been to establish the antifouling potency of an antifouling coating that releases hydrogen peroxide as biocide, and to investigate the potential use of peroxides as water-soluble polishing and leaching pigments. The investigations have shown that it is possible to identify particulates that, when applied as pigments in antifouling coatings, will provide polishing and leaching rates comparable to those of Cu₂O-based coatings. Furthermore, the combination of polishing and hydrogen peroxide leaching by a coating based on zinc peroxide in a suitable binder matrix provides antifouling properties exceeding those of a similar coating based entirely on zinc oxide.     

Lipase-catalyzed esterification of lactic acid with straight-chain alcohols

Enzymatic synthesis of esters of lactic acid and straight-chain alcohols with different chain lengths (C₆–C₁₈) were investigated in batch reactions with hexadecanol (C₁₆) as the model alcohol. Cyclohexane was the best solvent for higher ester yields, and the best biocatalyst was the immobilized Candida antarctica lipase B (Novozym 435) as well as the textile-immobilized Candida sp. lipase. A method was established to obtain ester yields in the range of 71 to 82% for the different alcohols, and the most favorable conditions for the esterification reaction using Novozym 435 were an equimolar ratio of lactic acid to alcohol, each at a concentration of 120 mM each; a 50°C reaction temperature; 190 rpm shaking speed; and the addition of 100 mg molecular sieves (4 Å) for drying. The ester yield increased with increasing lipase load, and a yield of 79.2% could be obtained after 24 h of reaction at 20 wt% of Novozym 435. The immobilized Candida sp. lipase prepared in the laboratory also could be used to produce esters of lactic acid and straight-chain alcohols, but it had a much lower activity than Novozym 435 with a temperature optimum of 40°C.     

Triglyceride selectivity of immobilized <Emphasis Type="Italic">Thermomyces lanuginosa</Emphasis> lipase in interesterification

The triglyceride (fatty acid) selectivity of an immobilized lipase from Thermomyces lanuginosa (Lipozyme TL IM) was investigated in lipase-catalyzed interesterification reactions between two nono-acid TG in n-hexane. Tristearin (tri-C18∶0) was used as a reference in a series of TG with saturated FA from tri-C4∶0 to tri-C20∶0, except for tri-C6∶0, and in a series of unsaturated FA from tri-C18∶1 to tri-C18∶3. The quantification was performed by HPLC, and different methods of selectivity evaluation were used. None of the methods used showed any significant differences between the performances of the lipase on the different TG, indicating that Lipozyme TL IM is nonselective toward FA or TG in the system used. A response surface design was used to investigate the influence of water activities (a _w ) and reaction temperatures on the reactivity of Lipozyme TL IM with a system of tripalmitin (tri-C16∶0) and trilaurin (tri-C12∶0) in n-hexane. An increase in temperature (40 to 60°C) was found to affect the reactivity of the lipase significantly. The reactivity of Lipozyme TL IM was unaffected by the change in a _w from 0.1130 to 0.5289. An increase in a _w only led to an increase in FFA formation.     

冶炼烟气净化：所有步骤在一台设备内完成

介绍Kimre公司的SXF^TM半错流洗涤器的结构、优点和应用。该洗涤器采用卧式并流气液接触方式,可根据需要分隔成不同操作段,在由交织单丝构成的纤维介质上完成气体的冷却、净化和除沫。与传统立式逆流填料塔相比,该洗涤器的优点为：高度低,泵、阀门、控制器等可在地面安装,容易操作和维修;液气比范围宽;可进行多级操作,包括在一台设备内完成多个化学过程。如用于冶炼烟气净化,所有步骤可在一台设备内完成。列举了化肥厂造粒塔气体净化、磷酸厂气体除氟和硫酸厂干燥塔除沫等应用实例。     

Forces Measured between Zirconia Surfaces in Poly(acrylic acid) Solutions

We have studied the forces between a sphere and a plane surface of yttria-partially-stabilized tetragonal-zirconia immersed in aqueous solutions of low-molecular-weight ( M _w= 10 000) poly(acrylic acid) (PAA) using atomic force microscopy. The measurements are performed at high pH where the adsorbed, highly charged anionic polyelectrolyte extends far into the solution, resulting in a combination of polymeric (steric) and electrostatic interactions. Analysis of the experimental data using scaling theory shows that the polymeric contribution dominates and that the electrostatic contribution is small at relatively high ionic strength (0.01 M NaCl). We find that the measured forces are highly dependent on time and interaction history of the absorbed PAA layer; consecutive compression-decompression cycles result in an increase of the surface coverage and the range of the repulsive polymeric interaction. This buildup of PAA at the interface is strongly related to attractive bridging interactions manifested as strong adhesion during decompression at less than full surface coverage. The force results are compared to rheological observations of zirconia suspensions stabilized by the same dispersant; the poor colloidal stability and high viscosity at low surface coverage of PAA are related to the attractive bridging interactions.     

Ligand Binding to Dynamically Populated G-Quadruplex DNA

Several small-molecule ligands specifically bind and stabilize G-quadruplex (G4) nucleic acid structures, which are considered to be promising therapeutic targets. G4s are polymorphic structures of varying stability, and their formation is dynamic. Here, we investigate the mechanisms of ligand binding to dynamically populated human telomere G4 DNA by using the bisquinolinium based ligand Phen-DC3 and a combination of single-molecule FRET microscopy, ensemble FRET and CD spectroscopies. Different cations are used to tune G4 polymorphism and folding dynamics. We find that ligand binding occurs to pre-folded G4 structures and that Phen-DC3 also induces G4 formation in unfolded single strands. Following ligand binding to dynamically populated G4s, the DNA undergoes pronounced conformational redistributions that do not involve direct ligand-induced G4 conformational interconversion. On the contrary, the redistribution is driven by ligand-induced G4 folding and trapping of dynamically populated short-lived conformation states. Thus, ligand-induced stabilization does not necessarily require the initial presence of stably folded G4s.