Optimal Pricing Algorithm in the Electricity Market with Battery and Accumulator and Demand–Supply Balancing

This paper considers the day‐ahead market with batteries and accumulators to level power generation. First, we model consumers with batteries, generators with batteries, and accumulators, all of whom strive to maximize their own profit. An optimal pricing algorithm based on dual decomposition and the steepest descent method is derived and shown to be stable. Finally, the effectiveness of the algorithm is demonstrated by means of numerical simulations which indicate that it achieves demand–supply balance.     

Development of a 400 kJ Nb3Sn superconducting magnet for an SMES system

An Nb₃Sn superconducting magnet to store 400 kJ was developed as a unit magnet for a 2.4-MJ SMES system used for stabilization studies of electrical power systems. The superconducting magnet consists of a cryostat and an Nb₃Sn coil. The dimensions of the coil are: 340 mm inner diameter, 700 mm outer diameter and 177 mm axial length. The pool-cooled coil is a stack of 20 Nb₃Sn double pancakes, and the cooling channels are aligned between pancake coils. To reduce Joule loss in electrical power converters, the maximum operating current of the coil is designed to be 350 A, which is one order of magnitude less than the operating currents of similar scale coils for pulse use. The conductor is an Nb₃Sn monolithic conductor with cross section 1.50 × 2.38 mm. For good superconducting stability and high dielectric strength of the coil, the Nb₃Sn double pancakes were wound by the react-and-wind technique. Operation of dc current to 105% (367.5 A) of the design operating current was achieved without quench. After the whole of the coil was exposed out of liquid helium, the coil did not quench under 120 A current operation for more than 2 hours. It was verified that the coil was stable for the SMES system. © 1998 Scripta Technica, Inc. Electr Eng Jpn, 121(3): 44–52, 1997     

DyP-Type Peroxidases: Recent Advances and Perspectives

In this review, we chart the major milestones in the research progress on the DyP-type peroxidase family over the past decade. Though mainly distributed among bacteria and fungi, this family actually exhibits more widespread diversity. Advanced tertiary structural analyses have revealed common and different features among members of this family. Notably, the catalytic cycle for the peroxidase activity of DyP-type peroxidases appears to be different from that of other ubiquitous heme peroxidases. DyP-type peroxidases have also been reported to possess activities in addition to peroxidase function, including hydrolase or oxidase activity. They also show various cellular distributions, functioning not only inside cells but also outside of cells. Some are also cargo proteins of encapsulin. Unique, noteworthy functions include a key role in life-cycle switching in Streptomyces and the operation of an iron transport system in Staphylococcus aureus, Bacillus subtilis and Escherichia coli. We also present several probable physiological roles of DyP-type peroxidases that reflect the widespread distribution and function of these enzymes. Lignin degradation is the most common function attributed to DyP-type peroxidases, but their activity is not high compared with that of standard lignin-degrading enzymes. From an environmental standpoint, degradation of natural antifungal anthraquinone compounds is a specific focus of DyP-type peroxidase research. Considered in its totality, the DyP-type peroxidase family offers a rich source of diverse and attractive materials for research scientists.     

Characterization of Class V DyP-Type Peroxidase SaDyP1 from Streptomyces avermitilis and Evaluation of SaDyPs Expression in Mycelium

DyP-type peroxidases are a family of heme peroxidases named for their ability to degrade persistent anthraquinone dyes. DyP-type peroxidases are subclassified into three classes: classes P, I and V. Based on its genome sequence, Streptomyces avermitilis, eubacteria, has two genes presumed to encode class V DyP-type peroxidases and two class I genes. We have previously shown that ectopically expressed SaDyP2, a member of class V, indeed has the characteristics of a DyP-type peroxidase. In this study, we analyzed SaDyP1, a member of the same class V as SaDyP2. SaDyP1 showed high amino acid sequence identity to SaDyP2, retaining a conserved GXXDG motif and catalytic aspartate. SaDyP1 degraded anthraquinone dyes, which are specific substrates of DyP-type peroxidases but not azo dyes. In addition to such substrate specificity, SaDyP1 showed other features of DyP-type peroxidases, such as low optimal pH. Furthermore, immunoblotting using an anti-SaDyP2 polyclonal antibody revealed that SaDyP1 and/or SaDyP2 is expressed in mycelia of wild-type S. avermitilis.     

Oxidation mechanisms of SiC-fiber–reinforced Si eutectic alloy matrix composites at elevated temperatures

SiC-fiber–reinforced binary Si eutectic alloy composites have been developed for aerospace applications using the melt infiltration method. In this study, the oxidation mechanisms of various binary Si eutectic alloys were evaluated at elevated temperatures. We suggest that the oxidation resistance of eutectic alloys could be predicted using the Gibbs energy change for the oxidation reaction. Based on these calculations, eutectic alloys of Si-16at%Ti, Si-17at%Cr, Si-22at%Co, Si-38at%Co, and Si-27at%Fe were prepared. These alloys produced uniform SiO₂ layers and showed the same oxidation resistance as Si at 1000°C under humid conditions. Therefore, SiC composites using Si alloys with excellent oxidation resistance can be predicted using thermodynamic calculations.     

Enhancement by ganglioside GT1b of annexin I phosphorylation in bovine mammary gland in the presence of phosphatidylserine and Ca2+

Ganglioside GT1b and, to a lesser extent, GD3, enhanced phosphorylation of a 36 kDa protein (the substrate of protein kinase C) in the particulate fraction from bovine mammary gland. Sialic acids, asialogangliosides, and GM3 were without effect, and GD1a conversely inhibited phosphorylation of the 36 kDa protein. The enhanced phosphorylation by GT1b required the simultaneous presence of phosphatidylserine (PS) and Ca²⁺. The 36 kDa protein reacted with anti-annexin I in Western blot analysis. Addition of purified annexin I to the reaction mixture containing the particulate fraction increased the extent of phosphorylated 36 kDa protein, and the phosphorylation was further enhanced by GT1b. The enhanced phosphorylation of annexin I by GT1b was also dependent on PS and Ca²⁺. When annexin I was phosphorylated by purified protein kinase C, GT1b inhibited the annexin I phosphorylation. Addition of epidermal growth factor or insulin to the particulate fraction had little effect on the enhancement. These results suggest that an enzyme or enzymes other than protein kinase C, epidermal growth factor receptor kinase, or insulin receptor kinase is responsible for the GT1b- and GD3-enhanced phosphorylation of annexin I in the presence of PS and Ca²⁺.     

A High-Frequency Resonant Inverter Using Current-Vector Control Scheme and Its Performance Evaluations

The authors introduce a new configuration of resonant-type high-frequency inverter having inherent fast control response of the output power and variable-voltage variable-frequency (VVVF) capability. The circuit is composed of a parallel combination of two series-resonant inverters with common input and output terminals. Both inverter units are operated at synchronous frequency and with an adjustable phase difference from 0° to 180°, allowing control of the output power from full to null power, respectively. Operation of this inverter is explained and computer-simulated operating waveforms and characteristic curves are shown in terms of normalized control variables and circuit parameters. A prototype inverter using Power MOSFET modules has been originally tested with a high-frequency induction heating and melting load to demonstrate experimentally the proposed control principle and the steady-state inverter performances under parallel tuned load conditions.     

Robust disturbance-rejection problems for linear ω-periodicdiscrete-time systems

Two robust disturbance-rejection problems with state feedback and with incomplete-state feedback for linear ω-periodic discrete-time systems are studied in the framework of the so-called geometric approach. Also, some necessary conditions and/or sufficient conditions for the problems to be solvable are presented     

Polonium evaporation and adhesion experiments for the development of polonium filter in lead–bismuth cooled reactors

Fundamental experiments were performed to determine the adhesion characteristics of polonium to different metals and to develop a filter for polonium evaporated from neutron-irradiated LBE. The results of the first experiments suggested that adhesion characteristics are almost the same for stainless steel and nickel metal. The results of the preliminary experiments for a polonium filter suggested that stainless steel mesh with thin wires could effectively collect polonium evaporated from neutron-irradiated LBE. In the experiments, stainless steel wire mesh was used, but from the results of adhesion experiment, it is expected that the same effect can be obtained with wire mesh made of other kinds of metal.     

Processing of ethanol fermentation broths by Candida krusei to separate bioethanol by pervaporation using silicone rubber‐coated silicalite membranes

BACKGROUND: Pervaporation employing ethanol‐permselective silicalite membranes as an alternative to distillation is a promising approach for refining low‐concentration bioethanol solutions. However, to make the separation process practicable, it is extremely important to avoid the problems caused by the adsorption of succinate on the membrane during the separation process. In this work, the pervaporation of an ethanol fermentation broth without succinate was investigated, as well as the influence of several fermentation broth nutrient components. RESULTS: Candida krusei IA‐1 produces an extremely low level of succinate. The decrease in permeate ethanol concentration through a silicone rubber‐coated silicalite membrane during the separation of low‐succinate C. krusei IA‐1 fermentation broth was significantly improved when compared with that obtained using Saccharomyces cerevisiae broth. By treating the fermentation broth with activated carbon, bioethanol was concentrated as efficiently as with binary mixtures of ethanol/water. The total flux was improved upto 56% of that obtained from the separation of binary mixtures, compared with 43% before the addition of activated carbon. Nutrients such as peptone, yeast extract and corn steep liquor had a negative effect on pervaporation, but this response was distinct from that caused by succinate. CONCLUSION: For consistent separation of bioethanol from C. krusei IA‐1 fermentation broth by pervaporation, it is useful to treat the low nutrient broth with activated carbon. To further improve pervaporation performance, it will be necessary to suppress the accumulation of glycerol. Copyright © 2009 Society of Chemical Industry