Trap Levels in Eu and other Rare‐Earth Ions Codoped CaAl2O4 Phosphors

Photoluminescence spectrum, trap depths, and densities of trapped carriers of CaAl₂O₄:Eu phosphor crystals doped with rare‐earth elements were studied using the thermally stimulated luminescence technique. Trap depths and densities of the specimens vary with rare‐earth elements doped as the auxiliary activators. Tm and Nd are found to be effective for the strong afterglow phosphorescence peaking at λ = 442 nm for several hours after the excitation. CaAl₂O₄:Eu phosphor crystals doped with Nd and Tm include high density of carriers trapped at E = 0.59 and 0.52 eV, respectively.     

Development of a new heterojunction structure (ACJ -HIT) and its application to polycrystalline silicon solar cells

A new solar cell structure named HIT (Heterojunction with Intrinsic Thin layer) has been developed based on new artificially constructed junction (ACJ) technology. In this structure a non-doped a-Si thin layer was inserted between the p(a-Si)/n(c-Si) heterojunction, improving the output characteristics and achieving a conversion efficiency of 18.1%. This structure was applied to cast polycrystalline silicon solar cells of a practical size. A high conversion efficeincy of 13.6% was obtained with a cell size of 10 cm × 10 cm using various technologies, including hydrogen plasma passivation.     

新一代超小型DIP-IPM

为了满足空调、洗衣机、冰箱等白色家电对高效、高性能的需要,三菱电机开发了新一代超小型第四代(Ver.4)双列直插封装的智能功率模块(Dual-In-linePackageIntelligentPowerModule,简称DIP-IPM)。本文首先分析了第四代超小型DIP-IPM内部电路的构成和功能,然后详细介绍了第四代DIP-IPM生产过程中的关键技术,包括无铅化、高热传导性绝缘片、chip-to-chip导线直接连接以及ASIC技术,最后与第三代(Ver.3)DIP-IPM进行了比较。     

Photoacoustic Spectroscopy of Some Energetic Materials

To find an effective laser source to ignite energetic materials, the absorption spectra of some energetic materials are obtained by means of a photoacoustic spectroscopy (PAS). In this experiment, PAS covers the wavelength region of 400 nm-1600 nm in which no other conventional method can take absorption spectra for powdered energetic materials. Photoacoustic spectra of 18 energetic materials are reported. In general, energetic materials tested showed peaks in 600 nm–800 nm and 1400 nm–1600 nm ranges. It is found that the energy required to initiate explosives in the case of ruby laser initiation were correlated with their photoacoustic signal intensities.     

Steam reforming on Ni-samaria-doped ceria cermet anode for practical size solid oxide fuel cell at intermediate temperatures

Direct internal and external reforming operations on Ni-samaria-doped ceria (SDC) anode with the practical size solid oxide fuel cell (SOFC) at intermediate temperatures from 600 to 750 °C are carried out to reveal the reforming activities and the electrochemical activities, being compared with the hydrogen-fueled power generation. The cell performance with direct internal and external steam reforming of methane and their limiting current densities were almost the same irrespective of the progress of reaction in the methane reformate at 700 and 750 °C. The durability test for 5.5 h at 750 °C with direct internal reforming operation confirmed that the cell performance did not deteriorate. The operation temperature of the cell controlled the reforming activities on the anode, and the large size electrode gave rise to high conversion due to the slow space velocity of the steam reforming. Direct internal steam reforming attained sufficient level of conversion for SOFC power generation with methane at 700 and 750 °C on the large Ni-SDC cermet anode.     

Preparation of sharp-melting hard palm midfraction and its use as hard butter in chocolate

Preparation of hard palm midfractions (PMF) and its use as a cocoa butter equivalent ingredient were studied. Hard PMF is obtained by multistep fractionation of palm oil involving dry fractionation (DF) and/or solvent fractionation (SF), usually using hexane or acetone. From our experience, in acetone, a polar solvent, symmetrical 1,3-disaturated triacylglycerols tend to selectively crystallize more than nonsymmetrical 1,2- or 2,3-disaturated triacylglycerols, making it suitable for obtaining the solid midfraction. Unfortunately, triacylglycerols are very soluble in hexane, and temperatures at least 15 degrees lower than those required for acetone must be used for equivalent crystal yields. On the other hand, DF is a less expensive and safer process. Thus, multistep fractionation combining DF and SF using acetone was developed to achieve sufficient removal of high-melting components, and further enrichment of 1,3-dipalmitoyl-2-oleoylglycerol and the hard PMF was obtained by triple-step fractionation of palm olein or double-step fractionation of soft PMF. Compared to conventional hard PMF, this hard PMF had a steeper melting curve and better snapping and sharp-melting qualities when used in chocolate. Heat resistance of the hard PMF chocolate was similar to the conventional hard PMF chocolate, and its bloom resistance could be improved by adding polyglycerol fatty acid esters.     

Bioconversion of 1-adamantanol to 1,3-adamantanediol using Streptomyces sp. SA8 oxidation system

To efficiently produce 1,3-adamantanediol (1,3-ad(OH)₂) from 1-adamantanol (1-adOH), our stocks of culture strains and soil microorganisms were surveyed for hydroxylation activity towards 1-adOH. Among them, the soil actinomycete SA8 showing the highest hydroxylation activity was identified as Streptomyces sp. based on 16S ribosomal DNA sequence analysis. The reaction products were purified by silica gel column chromatography, and from NMR and MS analyses, they were identified as 1,3-ad(OH)₂ and 1,4-ad(OH)₂. Streptomyces sp. SA8 produced 5.9 g l^? 1 1,3-ad(OH)₂from 6.2 g l^? 1 1-adOH in culture broth after 120 h at 25 °C. Using resting cells, 2.3 g l^? 1 1,3-ad(OH)₂ was produced after 96 h of incubation at a 69% conversion rate. In both cases, 1,4-ad(OH)₂ was formed as a byproduct at a rate of about 15%. Strain SA8 also hydroxylated 2-adamantanol and 2-methyl-2-adamantanol.     

Effect of packed structure on flow behaviour in a trickle bed biofilter

The effects of operation conditions on the flow behaviour in gas–liquid countercurrent trickle bed biofilter were experimentally examined. In order to prevent gas channelling in the biofilter, packings with a relatively large void fraction, which have a role to maintain a high void fraction in the bed, were added. The gas and liquid velocities of the packed structure and the packings were changed, and the residence time distributions (RTDs) of the gas and liquid were measured. It was found that the addition of void supporters was very effective in the suppression of gas channelling.