Crystallographic Texture Development in Bismuth Sodium Titanate Prepared by Reactive-Templated Grain Growth Method

Bi_0.5Na_0.5TiO₃ (BNT) and 0.94Bi_0.5Na_0.5TiO₃·0.06BaTiO₃ (BNT–BT) bulk ceramics with extensive 〈100〉 texture were prepared by the reactive-templated grain growth method, using platelike Bi₄Ti₃O₁₂ (BIT) particles as templates for BNT. Calcined compacts were composed of matrix grains with random orientation and 〈100〉-oriented grains transformed from aligned BIT particles, and the texture developed by the growth of oriented grains during sintering. Ceramics with extensive texture were obtained by using the starting mixture containing the maximum concentration of platelike BIT to form the maximum volume fraction of oriented grains.     

New class of cellulose fiber spun from the novel solution of cellulose by wet spinning method

A novel cellulose solution, prepared by dissolving an alkali-soluble cellulose, which was obtained by the steam explosion treatment on almost pure natural cellulose (soft wood pulp), into the aqueous sodium hydroxide solution with specific concentration (9.1 wt %) was employed for the first time to prepare a new class of multifilament-type cellulose fiber. For this purpose a wet spinning system with acid coagulation bath was applied. The mechanical properties and structural characteristics of the resulting cellulose fibers were compared with those of regenerated cellulose fibers such as viscose rayon and cuprammonium rayon commercially available. X-ray analysis shows that the new cellulose fiber is crystallographically cellulose II, and its crystallinity is higher but its crystalline orientation is slightly lower than those of other commercial regenerated fibers. The degree of breakdown of intramolecular hydrogen bond at C₃[X_am(C₃)] of the cellulose fiber, as determined by solid-state cross-polarization magic-angle sample spinning (CP/MAS) ¹³C NMR, is much lower than other, and the NMR spectra of its dry and wet state were significantly different from each other, indicating that cellulose molecules in the new cellulose fiber are quite mobile when wet. This phenomenon has not been reported for so-called regenerated cellulose fibers.     

Continual conversion of free fatty acid in rice bran oil to triacylglycerol by immobilized lipase

Rice bran oil containing 30–50% free fatty acid was continually converted to an oil containing more than 75% of triacylglycerol (TG) by means of immobilized lipase. The reaction was carried out at 60°C for 24 h with dehydration and reactant mixing by dry nitrogen flow under a positive nitrogen atmosphere. Enzymatic TG synthesis with evaporation by heating was not suitable because of the increasing peroxide value of the oil. Part of this article was presented at the annual meeting of the Japan Oil Chemists' Society at Sendai, Japan, October, 16, 1990.     

Fabrication and Microstructure Characterization of Ti3SiC2 Synthesized from Ti/Si/2TiC Powders Using the Pulse Discharge Sintering (PDS) Technique

Ti/Si/2TiC powders were prepared using a mixture method (M) and a mechanical alloying (MA) method to fabricate Ti₃SiC₂ at 1200°–1400°C using a pulse discharge sintering (PDS) technique. The results showed that the Ti₃SiC₂ samples with <5 wt% TiC could be rapidly synthesized from the M powders; however, the TiC content was always >18 wt% in the MA samples. Further sintering of the M powder showed that the purity of Ti₃SiC₂ could be improved to >97 wt% at 1250°–1300°C, which is ∼200°–300°C lower than that of sintered Ti/Si/C and Ti/SiC/C powders using the hot isostatic pressing (HIPing) technique. The microstructure of Ti₃SiC₂ also could be controlled using three types of powders, i.e., fine, coarse, or duplex-grained, within the sintering temperature range. In comparison with Ti/Si/C and Ti/SiC/C mixture powders, it has been suggested that high-purity Ti₃SiC₂ could be rapidly synthesized by sintering the Ti/Si/TiC powder mixture at relatively lower temperature using the PDS technique.     

Soluble and colorless polyimides with polyalicyclic structures [1]

Two tetracarboxylic dianhydrides with polyalicyclic structure, bicyclo[2.2.2]octane-2-endo, 3-endo, 5-exo, 6-exo-2,3:5,6-dianhydride (5a) and the all-exo isomer (5b), were synthesized in six steps using phthalic acid as a starting material. The dianhydrides were polymerized at 85–105°C in well-purified DMAc with aromatic diamines which were purified by two recrystallizations and then sublimation. The polyimides formed flexible and tough films, and were soluble in aprotic polar solvents such as DMAc. The 5%-weight loss temperatures were over 450°C. The polyimides possessed glass-transition temperatures in the range from 211 to 385°C. The polyimides films had a tensile modulus range of 1.5–2.6 GPa, a tensile strength range of 52–96 MPa, and an elongation range at break of 3–11%. The polyimide films showed cutoffs at wavelengths shorter than 320 nm and were entirely colorless. The colorlessness of the polyimide films was maintained up to 200°C when heated in air and to 400°C in a N₂ atmosphere.     

ARCOR,a new photolithography technique with antireflective coating on resist

The multiple interference effect is one of the major causes of the fluctuation in critical dimension control (CD) and in mark detection for alignment. Suppressing this effect is critical for future photolithography. We propose a new photolithography technique called anti reflective coating on resist (ARCOR), which improves linewidth accuracy and overlay accuracy by suppressing multiple interference. ARCOR consists of relatively simple processes: A clear antireflective film is spun onto the resist prior to the mark detecting for alignment and exposure. The film is subsequently removed and the resist developed in the conventional way. ARCOR differs from ARC, which suppresses the reflection at the resist/substrate interface. ARCOR suppresses the reflection at the air/resist interface. ARCOR allows mark detection and exposure without light intensity-loss and multiple interference. The experiments mainly examine polysiloxane and perfluoroalkylpolyether as ARCOR materials. It is shown that linewidth accuracy can be improved from 0.3 to 0.03 μm. The signal-to-noise ratio of the alignment signal is drastically improved, and the overlay error is about half that of the conventional method. ARCOR is also effective for directly measuring the reflectivity at the resist/substrate interface, which is a key parameter of the multiple interference effect and the halation. Using ARCOR and a thin resist film, the measured ratio of reflected light to incident light indicates the reflectivity at the resist/substrate interface. Because, the probe light does not reflect off the resist surface and the intensity-loss at the resist surface is suppressed. With perfluoroalkylpolyether film, the measurement error is ～ 1.5%.     

Antioxidizing component,musizin, inrumex japonicus houtt

A substance with antioxidant properties was obtained from the hexane extract of roots ofRumex japonicus Houtt. The active component of the hexane extract was isolated and characterized as 2-acetyl-1,8-dihydroxy-3-methyl naphthalene, trivially named musizin (MUS). The antioxidant activities of MUS in six types of fats and oils were higher than that of butyl hydroxyanisole (BHA) and δ-tocopherol (δ-TOC). Together, TOC and MUS have a synergistic effect, because comparable amounts of either had lower antioxidant activity than various combinations of the two antioxidants. When we studied the antioxidant properties of a mixture of MUS and δ-TOC with methyl linoleate (MeLH), we found that the rates of destruction of the two antioxidants were comparable, but that their destruction occurred sequentially, with MUS first followed by δ-TOC, after which the oxidation of MeLH quickly occurred. Comparison of the antioxidant activity of MUS and its analogs suggests that only one of the two hydroxyl groups in MUS is involved in its antioxidant activit. Intermolecular hydrogen bonding may be involved.     

Excitations bound to a vortex line in layered superconductors

Using Bogoliubov-de Gennes equation, we study quasiparticle excitations in layered superconductors in the presence of a straight vortex line which is parallel to the layers. The lowest bound state is shown to have energy eigenvalue of the order of magnitude , the energy gap, in contrast to the corresponding value ²/E_F when the line is perpendicular to the layers.     

A combined approach for modeling particle behavior in granular impact damper using discrete element method and cellular automata

A particle impact damper is a vibration absorber type that consists of a container attached to a primary vibrating structure. It also contains many particles that are constrained to move inside the container, whereby the damping effect can be obtained by collision between particles and the container. The discrete element method (DEM) has been developed for modeling granular systems, where the kinematics of each particle are calculated numerically using the equations of motion. However, the computational time is significant since the algorithm checks for particle contacts for all possible particle combinations. The use of a cellular automata (CA) modeling technique may provide increased computational efficiency due to the local updating of variables, and the discrete treatment of time and space. In this study, we propose a new approach combining DEM with CA for modeling a granular damper under a forced excitation. We use DEM to describe the particle motion according to the equations of motion, while CA is introduced for the particle contact checks in discrete space. We also investigate the effect of simplification in the contact force model, which allows the unit time step of numerical integration to become larger than that used in the strict model. It is shown that the suggested particle contact scanning method and the force approximation model contribute to the reduction of the computational time, and neither degenerates the calculation accuracy nor causes the numerical instability.     

Inkjet‐Printed Lithium–Sulfur Microcathodes for All‐Printed,Integrated Nanomanufacturing

Improved thin‐film microbatteries are needed to provide appropriate energy‐storage options to power the multitude of devices that will bring the proposed “Internet of Things” network to fruition (e.g., active radio‐frequency identification tags and microcontrollers for wearable and implantable devices). Although impressive efforts have been made to improve the energy density of 3D microbatteries, they have all used low energy‐density lithium‐ion chemistries, which present a fundamental barrier to miniaturization. In addition, they require complicated microfabrication processes that hinder cost‐competitiveness. Here, inkjet‐printed lithium–sulfur (Li–S) cathodes for integrated nanomanufacturing are reported. Single‐wall carbon nanotubes infused with electronically conductive straight‐chain sulfur (S@SWNT) are adopted as an integrated current‐collector/active‐material composite, and inkjet printing as a top‐down approach to achieve thin‐film shape control over printed electrode dimensions is used. The novel Li–S cathodes may be directly printed on traditional microelectronic semicoductor substrates (e.g., SiO₂) or on flexible aluminum foil. Profilometry indicates that these microelectrodes are less than 10 µm thick, while cyclic voltammetry analyses show that the S@SWNT possesses pseudocapacitive characteristics and corroborates a previous study suggesting the S@SWNT discharge via a purely solid‐state mechanism. The printed electrodes produce ≈800 mAh g^?1 S initially and ≈700 mAh g^?1 after 100 charge/discharge cycles at C/2 rate.