Mechanical Properties of Borosilicate Glass Coated with Two-layered Ceramics by Sputtering

The durability of coated glass materials should be improved in their applications, and the possibility of a two-layer coating was examined as a processing for the improvement. In the present work, the borosilicate glass was coated with two-layered ceramics by the radio-frequency (RF) magnetron sputtering method, and mechanical properties of coated glass materials were investigated. The measured surface roughness and porosity of coating film suggested that relatively smooth and dense coating films were formed under the sputtering condition adopted in this work. Thicker film was found to be harder because of the avoidance of effect due to softer glass substrate. Higher RF output power resulted in harder film. The bending strength was reduced by longer time of sputtering as well as porosity of coating film. By comparison with glass materials coated with single ceramics and the glass substrate, it was clarified that the strength and hardness of coated glass materials were improved by two-layer coating.     

Pt-Al2O3 Cryogel with High Thermal Stability for Catalytic Combustion

The cryogel catalyst of platinum on alumina was prepared from aluminum sec-butoxide and H₂PtCl₆ through the sol-gel technique and subsequent freeze drying. The cryogel catalyst showed higher thermal stability of platinum than the corresponding xerogel or impregnation catalysts, which was ascribed to the more intimately developed platinum-alumina interaction accompanied by the encapsulation of the metal into the alumina cryogel. It was also shown that platinum accessibility was higher on the cryogel than on the xerogel despite the higher thermal stability of the metal on the formed than on the latter. For the VOC combustion, the cryogel exhibited higher activity than the xerogel and impregnation catalysts. Also for the methane combustion the cryogel showed higher activity, although it showed lower activity than the impregnation catalysts above 600 °C. By the addition of ceria as an additive to the cryogel catalyst, the CH₄ combustion activity was improved especially in the temperature region above 600 °C.     

Oxidation products of cyanidin 3-O-β-d-glucoside with a free radical initiator

Recently, we have reported that anthocyanins show strong antioxidative activity, but no attention has been paid to anthocyanins from the viewpoint of the reaction mechanism of alkylperoxyl radicals; therefore, we investigated the reaction products of antioxidative anthocyanins (cyanidin 3-O-β-d-glucoside). Cyanidin 3-O-β-d-glucoside was reacted with 2,2′-azobis(2,4-dimet hylvaleronitrile) to generate the alkylperoxyl radicals, and the reaction products were isolated by high-performance liquid chromatography. The products were identified as 4,6-dihydroxy-2-O-β-d-glucosyl-3-oxo-2,3-dihydrobenzofuran and protocatechuic acid. Based on reaction products, the antioxidative mechanism of cyanidin 3-O-β-d-glucoside may be different from that of α-tocopherol; cyanidin 3-O-β-d-glucoside would produce another radical scavenger, as it would break down the structure and scavenge the radicals.     

Pulsed laser irradiation impact on two marine diatoms Skeletonema costatum and Chaetoceros gracilis

The ability of pulsed laser irradiations to cause damage on the biofouling organisms is recently being investigated. If this technique is employed in industries such as power generation wherein a large quantity of water is being used for the cooling purpose, many organisms other than the targeted would get affected. In this study, we have investigated the damage caused by the pulsed laser irradiations from an Nd:YAG laser (fluence 0.1J/cm(2)) for varying durations such as 2, 5, 10, 30, 60 and 300 s on two marine diatom species namely Skeletonema costatum and Chaetoceros gracilis. Upon exposure to low power laser irradiations, these diatom species showed mortalities between 52.6+/-9.3% to 97.7+/-3.1% in the case of S. costatum and 57.8+/-2.5% to 98.9+/-0.6% in the case of C. gracilis for 2 and 300 s of irradiations, respectively. The mortality increased with the increase in the duration of laser irradiation. The estimation of the chlorophyll a concentration in the irradiated samples showed a considerable reduction varying between 9.8% and 57% in C. gracilis and 3% and 70.3% in S. costatum for 2 and 300 s of irradiations, respectively. The laser-survived cells grew as the non-irradiated (control) samples. C. gracilis frustules were broken by the laser whilst, the cell materials were drained out of the frustules in the case of S. costatum. The study therefore showed that the low power pulsed laser irradiations could cause significant damage on the two species of planktonic diatoms.     

Near-infrared combination and overtone bands of the CH2 sequence in CH2X2, CH2XCHX2, and CH3(CH2)5CH3 and their characteristic frequency zones

We characterized near-infrared spectra of the CH2 sequence in CH2X2 (X=halogen), CH2ClCHCl2, and CH3(CH2)5CH3. Each near-infrared absorption in the region from 3500 to 10,000 cm-1 is consistently assigned to one of the five different combination or overtone groups, in the order of increasing frequency, of the {[v(CH)]+[delta(CH)]} (A), {[v(CH)]+[2delta(CH)]} (B), [2v(CH)] (C), {[2v(CH)]+[delta(CH)]} (D), and [3v(CH)] (E) types, where v(CH) and delta(CH) denote the CH stretching and CH deformation normal modes, respectively. Each group has its own characteristic frequency zone. The bands of B, D, and E, which are second-order combinations or overtones, are weaker by 1/10-1/50 than those of A and C, which are first-order combinations or overtones. The near-infrared spectra of the CH2 sequence show "window zones" of very weak or no absorptions. This suggests that we can perceive the characteristic near-infrared bands of a functional group through the window zones, and we give an example to demonstrate this. The first-order combination bands of type A only of CH2X2 are reasonably assigned to a pair of the normal modes of v(CH) and delta(CH). From this we predict that the first-order combination bands should give structural information on the CH2 chain, similar to the infrared fundamental bands.     

Japanese contribution to the DEMO-R&D program under the Broader Approach activities

Several technical R&D activities mainly related to the blanket materials are newly launched as a part of the Broader Approach (BA) activities, which was initiated by the EU and Japan. According to the common interests for these parties in DEMO, R&Ds on reduced activation ferritic/martensitic (RAFM) steels as structural material, SiC_f/SiC composites as a flow channel insert material and/or alternative structural material, advanced tritium breeders and neutron multipliers, and tritium technology are carried out through the BA DEMO R&D program, in order to establish the technical bases on the blanket materials and the tritium technology required for DEMO design. This paper describes overall schedule of those R&D activities and recent progress in Japan carried out by JAEA as the domestic implementing agency on BA, collaborating with Japanese universities and other research institutes.     

Internal stress behavior of the short ceramic fiber reinforced aluminum alloy under tensile deformation

The in situ measurement of phase stress under tensile deformation on an A6061 alloy reinforced with SiC whiskers (Al/SiCw MMC: Metal Matrix Composite) was performed using the X-ray diffraction technique. In order to raise a preciseness of measurements, we applied a profile fitting technique to separate the nearby located diffraction peak. Tensile deformation on elastic to plastic range was applied by four points bending device and discussed internal stress behavior in the short ceramic fiber reinforced MMC. Phase stress in Al matrix was increased linearly up to 2800×10⁻⁶ in strain and then saturated immediately. On the other hand phase stress in SiC whiskers shows an unstable stress behavior. It was decreased at first because of the Poisson's effect from Al matrix but reversed over 500×10⁻⁶ applied strain. The measured phase stress behavior in elastic region agreed with the calculations using micromechanics based on Eshelby/Mori–Tanaka model except for this unstable internal stress region. The macro stress behavior in plastic region was extremely small than that of the tensile test results. It supposed that the mechanism of strength is not so much the fiber reinforcing as the dispersion strengthening like the Orowan mechanism. Regarding the fatigue property, ΔK_th of the Al/SiC MMC, this was lower than that of the A6061 alloy. On the Al/SiCw MMC specimen, many micro void formations were observed around the fatigue crack tip even under the ΔK_th of A6061. It was considered that these were caused by the high gradient of residual stress on composite process and the unstable stress behavior in low ΔK region.     

Determination of emotional content of video clips by low-level audiovisual features

Affective analysis of video content has greatly increased the possibilities of the way we perceive and deal with media. Different kinds of strategies have been tried, but results are still opened to improvements. Most of the problems come from the lack of standardized test set and real affective models. In order to cope with these issues, in this paper we describe the results of our work on the determination of affective models for evaluation of video clips using audiovisual low-level features. The affective models were developed following two classes of psychological theories of affect: categorial and dimensional. The affective models were created from real data, acquired through a series of user experiments. They reflect the affective state of a viewer after watching a certain scene from a movie. We evaluate the detection of Pleasure, Arousal and Dominance coefficients as well as the detection rate of six affective categories. For this end, two Bayesian network topologies are used, a Hidden Markov Model and an Autoregressive Hidden Markov Model. The measurements were done using audio-only models, video-only models and fused models. Fusion is done using two different methods, a Decision Level Fusion and Feature Level Fusion. All tests were conducted using localized affective models, both categorial and dimensional. Results are presented in terms of detection rate and accuracy for affective families, affective dimensions and probabilistic networks. Arousal was the best detected dimension, followed by dominance and pleasure.