Chemical and electrochemical preparation of poly(9,10-dihydrophenanthrene-2,7-diyl) using nickel complexes and electrochemical properties of the polymer

Summary Dehalogenation polycondensations of 2,7-dibromo-9,10-dihydrophenanthrene with isolated zero-valent nickel complex and electrochemically generated zero-valent nickel complex afford -conjugated poly(9,10-dihydrophenanthrene-2,7-diyl). The electrochemically synthesized polymer is obtained as a thin film on electrode, and shows a reversible electrochemically doping-undoping cycle in an oxidation region. The polymer has essentially the same -conjugation system as that of poly(p-phenylene).     

Seismic proof test of a reinforced concrete containment vessel (RCCV): Part 2: Results of shaking table tests

A 1/8-scale model was constructed of a reinforced concrete containment vessel (RCCV) used in the latest advanced boiling water reactors (ABWR). Shaking table tests were conducted on it with input motions corresponding to or exceeding a design earthquake assumed for a real Nuclear Power Plant.The objectives of the tests were to verify the structural integrity and the leak-proof functional soundness of the RCCV subjected to design earthquakes, and to determine the ultimate strength and seismic margin by an excitation that led to the model's collapse. The model, the test sequence and the pressure and leak test results were addressed in Part 1. The shaking table test method, the input motions and the test results, including the transition of the model's stiffness, natural frequencies and damping factors and the effects of vertical input motions and internal pressure on the model's characteristics and behavior, the load–deformation, the ultimate strength, the failure mode of the reinforced concrete portion and the liner plate are described here. The seismic safety margin that was evaluated by the energy input during the failure test to a design basis earthquake will be described in Part 3. The analytical results of simulation using the multi-lumped mass model will be described in Part 4.     

Modeling of quantitative relationships between physicochemical properties of active pharmaceutical ingredients and tensile strength of tablets using a boosted tree

Objectives: The aim of this study was to explore the potential of boosted tree (BT) to develop a correlation model between active pharmaceutical ingredient (API) characteristics and a tensile strength (TS) of tablets as critical quality attributes.

Methods: First, we evaluated 81 kinds of API characteristics, such as particle size distribution, bulk density, tapped density, Hausner ratio, moisture content, elastic recovery, molecular weight, and partition coefficient. Next, we prepared tablets containing 50% API, 49% microcrystalline cellulose, and 1% magnesium stearate using direct compression at 6, 8, and 10?kN, and measured TS. Then, we applied BT to our dataset to develop a correlation model. Finally, the constructed BT model was validated using k-fold cross-validation.

Results: Results showed that the BT model achieved high-performance statistics, whereas multiple regression analysis resulted in poor estimations. Sensitivity analysis of the BT model revealed that diameter of powder particles at the 10th percentile of the cumulative percentage size distribution was the most crucial factor for TS. In addition, the influences of moisture content, partition coefficients, and modal diameter were appreciably meaningful factors.

Conclusions: This study demonstrates that BT model could provide comprehensive understanding of the latent structure underlying APIs and TS of tablets.     

Short communication: Temporal changes in the skin morphology of dairy cows during the periparturient period

Management of dairy cow productivity requires monitoring of their nutritional status by visual observation. It has been suggested that changes in hair coat appearance are among the indicators of nutritional state in dairy cows. Temporal changes in the skin morphology in cows, however, have not been reported. In this study, we examined the changes in the skin of dairy cows that occur during the peripartum period. Seven pluriparous cows were used. Skin samples were collected at 28 d before the due date and 28 d and 56 d after calving for morphological examination. Hair follicle width was 108.8 ± 5.9 µm (±SD) in the dry period, 95.5 ± 5.5 µm at 28 d after calving, and 104.2 ± 5.3 µm at 56 d postpartum. The percentages of anagen hair follicles during these 3 periods were 41.4 ± 3.4, 18.5 ± 3.4, and 32.3 ± 3.3%, respectively. The corresponding sebaceous gland sizes were 8,362.0 ± 707.6, 7,800.0 ± 831.4, and 9,186.8 ± 962.6 µm², respectively. Hair follicle width was positively correlated with percentage of anagen hair follicles. The thickness of epidermal and proliferation rate of epidermal cell were also correlated. However, the hair follicle width, sebaceous gland size and cell proliferation rate, and thickness and proliferation rate of epidermal cells did not show any marked changes.     

Development of a hybrid ECT sensor for JSFR SG double-wall tubes

A new design has been adopted for the steam generator (SG) tubes of the Japan Sodium-cooled Fast Reactor (JSFR) using double-wall tubes. This paper estimates and assesses the effectiveness of detecting defects in SG double-wall tubes of the JSFR by using combined high-frequency eddy current testing (ECT) and low-frequency remote field eddy current sensors. We confirm that the proposed hybrid ECT sensor is highly sensitive to small defects, fatigue cracks, and other defects even when located under support plates of tubes. The parameters of the hybrid ECT sensor are designed and optimized to detect small defects using accurate numerical simulations based on the finite element method, using an in-house developed code. The sensitivity and high performance of the hybrid ECT sensor was validated with experimental measurements.     

Determination of emotional content of video clips by low-level audiovisual features

Affective analysis of video content has greatly increased the possibilities of the way we perceive and deal with media. Different kinds of strategies have been tried, but results are still opened to improvements. Most of the problems come from the lack of standardized test set and real affective models. In order to cope with these issues, in this paper we describe the results of our work on the determination of affective models for evaluation of video clips using audiovisual low-level features. The affective models were developed following two classes of psychological theories of affect: categorial and dimensional. The affective models were created from real data, acquired through a series of user experiments. They reflect the affective state of a viewer after watching a certain scene from a movie. We evaluate the detection of Pleasure, Arousal and Dominance coefficients as well as the detection rate of six affective categories. For this end, two Bayesian network topologies are used, a Hidden Markov Model and an Autoregressive Hidden Markov Model. The measurements were done using audio-only models, video-only models and fused models. Fusion is done using two different methods, a Decision Level Fusion and Feature Level Fusion. All tests were conducted using localized affective models, both categorial and dimensional. Results are presented in terms of detection rate and accuracy for affective families, affective dimensions and probabilistic networks. Arousal was the best detected dimension, followed by dominance and pleasure.     

Organic–inorganic nanomatrix structure and properties of related naturally occurring rubbery macromolecules

The outstanding mechanical properties of soft materials i.e. natural rubber are partly due to the organic–inorganic nanomatrix structure because numerous organic microparticles are dispersed in a small amount of an inorganic nanomatrix composed of inorganic nanoparticles and organic macromolecules. Here we form an organic–inorganic nanomatrix using graft-copolymerization of a vinyl monomer with an inorganic oxide precursor onto natural rubber particles with an average diameter of 1 μm dispersed in water. The inorganic oxide precursor is converted into inorganic oxide nanoparticles through hydrolysis and condensation, forming chemical linkages between natural rubber microparticles and inorganic oxide nanoparticles. Transmission electron microscopy indicates that the organic–inorganic nanomatrix is densely filled with inorganic oxide nanoparticles and the natural rubber microparticles are dispersed in the nanomatrix. This nanomatrix composite realizes both energetic elasticity and entropic elasticity of a soft material, opening a novel field of building block chemistry with respect to a pair of organic microparticles and inorganic nanoparticles.     

Quantitative analysis of energy-efficiency strategy on CO2 emissions in the residential sector in Japan – Case study of Iwate prefecture

This study examines the economics of energy-efficiency strategies for reducing CO₂ emissions in the residential sector in Japan from the perspective of regional characteristics. For this study, the residential sector in Iwate prefecture was selected as representative of rural areas in Japan. In order to promote purchases of energy-efficient consumer appliances, the prefectural government is presumed to reimburse purchasers a part of the cost difference between energy efficient and conventional appliances. This paper begins with a discussion of the prefecture’s financial support for purchasers of energy efficient appliances and assumes that the payments come from prefectural government funds. This paper then looks at the effect of a carbon-tax refund on the reduction of CO₂ emissions. The results show that, if half of the households use energy-efficient appliances, then CO₂ emissions in the residential sector in the year 2020 will decreases from the BAU scenario, 0.726 Mt-C to 0.674 Mt-C. However, the Iwate prefectural government expends $105 million annually, which is 1.5% of the total tax revenue in the year 2003. The carbon-tax refund effectively encourages further reductions in CO₂ emissions. Under the $20/tC carbon tax, proposed by the Ministry of the Environment, the carbon-tax refund leads to a reduction in residential CO₂ emissions from 0.726 Mt-C to 0.712 Mt-C.     

Development of a novel image intensifier of an amplifiedmetal-oxide semiconductor imager overlaid with electron-bombardedamorphous silicon

We developed a novel image intensifier (II) of an amplified metal-oxide-semiconductor (MOS) imager (AMI) overlaid with electron-bombarded (EB) amorphous silicon (a-Si). The electron bombardment gain (EB gain) was 1500 at an accelerating voltage of 10 kV. Since the multiplication process was free from a phosphorescent screen and a coupling fiber plate as in the conventional II, the resolution was high and the picture quality was good and free from granularity noises, white spots, lag and sticking. As for fatigue of X-ray irradiation, the contrasts of a vertical stripe (Smear) are not detectable and damaged areas in AMI are weak whereas both of those in charge-coupled devices (CCDs) are strong