Iodine reaction of vinyl acetate/vinyl propionate copolymers. III. Iodine affinities of the radically polymerized copolymers and the copolymers derived from partially saponified polyvinyl acetate

The minimum sequence lengths (n_c) of vinyl acetate (VAc) units necessary to form a colored iodine complex were determined to be 4 and 17 for radically polymerized VAc/vinyl propionate (VPr) and VAc/isopropenyl acetate (IPAc) copolymers, respectively. The iodine affinities (I/VAc) of VAc/VPr copolymers (SP-series) obtained by propionylation of partially saponified polyvinyl acetate (PVAc) were remarkably affected by the saponification conditions. An increase of the water content in acetone/water mixture as saponification solvent brought about a decrease of the iodine affinities of the SP-series. The dependence of the iodine affinity on the saponification of monomer units in the SP-series was compared with that in the radically polymerized VAc/VPr copolymers by taking the sequence probability as the measure of monomer unit distribution. The results strongly supported an occurence of the slide fastener reaction at high degrees of saponification, which was well-known in the saponification of PVAc. Furthermore, it was found that the saponification mode of PVAc at low degrees of saponification was influenced uniquely by the water content in saponification solvents and the saponification temperature.     

Aging and availability of binocular disparity and pictorial depth cues in 3D graphics contents

Some stereoblind observers do not perceive depth of 3D stimuli that depends on binocular disparity. These individuals, who have no disabilities, comprise over 5% of the general population. In addition, 17–30% of nonstereoblind young and young–middle people do not use disparity information in certain 3D environments, a phenomenon known as pseudo‐stereoblindness. This study aimed to investigate the relationship between aging and the proportion of pseudo‐stereoblindness in the general population. In an experiment, 134 nonstereoblind participants, ranging in age from 17 to 83 years, judged subjective depth of 3D stimuli containing binocular disparity and pictorial depth cues. Results showed that the proportion of pseudo‐stereoblindness among young (17–24 years old) and young–middle aged observers (25–39 years old) was 29%, in both cases. However, the proportion of pseudo‐stereoblind observers increased in older populations: 65% and 82% in the middle (40–54 years old) and senior (55–83 years old) age groups, respectively. These results suggest that a number of people, especially in elderly populations, have trouble perceiving depth from binocular disparity in 3D graphic contents despite their essential ability to use disparity information.     

Additional kernel observer: privilege escalation attack prevention mechanism focusing on system call privilege changes

International Journal of Information Security - Cyberattacks, especially attacks that exploit operating system vulnerabilities, have been increasing in recent years. In particular, if administrator...     

Carbonization and graphitization of poly-p-phenylene sulphide (PPS) film

Oriented poly-p-phenylene sulphide (PPS) films (thickness 12 and 75 m) and PPS powder were carbonized/graphitized after stabilizing by oxidation, in order to examine the effect of sulphur on graphitizability of the resulting carbons. The films and the powder resulted in carbons with a high and a low graphitizability respectively. An in-plane oriented structure of the PPS film was the most predominant factor to lead to a high graphitizability, and sulphur in the precursor did not lower the graphitizability when it was subjected to solid-phase carbonization. These phenomena are discussed on the basis of analytical data.     

Magnetically coupled oscillators applicable to high-sensitivity mass detection

Microsystem Technologies - In this paper, a system of magnetically coupled oscillators consisting of a Π-shaped horizontal cantilever and a rectangular vertical cantilever with a frequency...     

Modified Bagolini striated glass test: clinical applications of starlight test in binocular visual field screening

AIM: To introduce the "starlight" test which was devised to check binocular vision in normal conditions of seeing in a rapid, easy, and cost effective manner and to estimate the possibility of its clinical use in screening the binocular visual field of patients. METHOD: The Bagolini striated glass test consists of optically plano lenses with imperceptible parallel scratches that barely blur the environment but produce two perpendicular luminous stripes (right eye stripe of 45 degrees and left eye stripe of 135 degrees) when subjects with normal binocular vision view one light source. Unlike the original Bagolini test, the starlight test uses three light sources in horizontal or vertical lines according to the testing purposes and the subject is asked to fixate upon the centre light. Through Bagolini glasses, the subject observes the resulting grid-like pattern and the state of binocular visual field of the subject can be roughly estimated. RESULTS: Normal subjects and patients with strabismus, visual field loss from intracranial diseases, glaucoma, retinitis pigmentosa, and functional visual loss were examined using the starlight test and findings from each case were discussed. CONCLUSIONS: The starlight test, which was made by hand at a low cost, is a simple test that can be used clinically. It provides information about the state of binocular vision of patients in normal conditions of seeing. It is also useful because it enables the examiner to share similar experiences with the examinee. The results suggest it can be effective in visual field screening.     

Superconductivity and spin correlation study by Fe3+ - ESR in (La1−xSrx)2Cu1−yFeyO4−z

Fe³⁺-ESR measurements are carried out for the samples of (La_1–xSr_x)₂Cu_1–yFe_yO_4–z. Peak-peak width H_pp of the signals decreases with falling temperature until minimum value and rises sharply with further decreasing temperature, which is approximated by H_pp = C₀ +C₁/T + BT. The H_pp behavior at high temperature and at low temperature can be analyzed by Korringa mechanism and slowing down of Fe₃₊ spin fluctuation, respectively. From the analysis of coefficient B's of Korringa terms, C₀ and g-shift, it is revealed that the magnetic interaction of Fe³⁺ with hole carriers and Ce²⁺ spins depends strongly on hole density.     

Slow eye movement as a possible predictor of reaction delays to auditory warning alarms in a drowsy state

In recently developed intelligent vehicles, warning alarms are often used to prompt avoidance behaviours from drivers facing imminent hazardous situations. However, when critical reaction delays to auditory stimulation are anticipated, the alarm should be activated earlier to compensate for such delays. It was found that reaction times to an auditory stimulus significantly increased in the presence of slow eye movement (SEM), which is known to occur frequently during the wake-sleep transition. The reaction delay could not be attributed to temporal effects such as fatigue and was invariant regardless of response effectors (finger or foot). Moreover, it was found that applied pedal force decreased immediately after an auditory stimulus interrupted SEM. Consequently, it was concluded that SEM can be a good predictor of reaction delays to auditory warning alarms when drivers are in a drowsy state. STATEMENT OF RELEVANCE: The present study demonstrated that simple auditory reaction time significantly increased when SEM emerged. In the design of vehicle safety systems using warning alarms to prompt avoidance behaviours from drivers, such reaction delays during SEM must be taken into account.     

A novel method for measuring direct compressive properties of carbon fibres using a micro-mechanical compression tester

A novel method has been developed for measuring direct compressive properties such as strength and elasticity of a series of mesophase-pitch-based and PAN-based carbon fibres about 10 m in diameter by uniaxial and transverse compression tests using a micromechanical tester. The fibres were shaped into cylindrical specimens, with their size ratio of length to diameter kept at about 2 to 3, by separating them from a thin film made by polishing the cut faces of a strand of carbon fibres with epoxy resin as a matrix. Individual cylindrical specimens were stood up or laid down on a glass plate without any fixer for the measurements of axial and transverse compression properties of fibres, respectively. The fibres exhibited non-linear elasticity, with the compressive modulus decreasing with compressive deformation. The direct axial compressive strengths of pitch-based carbon fibres were found to be marginally lower than the indirect ones, whereas there was no significant difference between the two strength values for PAN-based fibres. The pitch-based fibres exhibited smaller average values of axial compressive strength than the PAN-based fibres. The transverse compressive strength, which decreases with an increase in elasticity of carbon fibres, exhibited a considerably lower average value than that of the axial compressive strength. Further, the axial compressive strength was found to be smaller than the direct tensile strength for the fibres.