Protective effects of galacturonic acid-rich vinegar brewed from Japanese pear in a dextran sodium sulfate-induced acute colitis model

The effects of pear vinegar (PV), which was specially brewed for enhanced galacturonic acid content, on the DSS-induced ulcerative colitis (UC) mouse model were evaluated. PV improved clinical symptoms, colon inflammation, and histological tissue injury in the DSS-induced acute UC mouse model. Moreover, PV suppressed inflammation due to acute UC by suppressing the myeloperoxidase (MPO)-mediated activation of inflammatory cells such as leukocytes and decreasing the serum concentration of IL-6. Our results demonstrated the protective action of PV in the DSS-induced acute UC mouse model. On the other hand, commercial apple vinegar did not show a protective effect in the DSS-induced acute UC mouse model. Our findings indicate that PV may act as a new functional food for inflammatory bowel disease patients.     

Steric hindrance by 2 amino acid residues determines the substrate specificity of isomaltase from Saccharomyces cerevisiae

The structures of the E277A isomaltase mutant from Saccharomyces cerevisiae in complex with isomaltose or maltose were determined at resolutions of 1.80 and 1.40 Å, respectively. The root mean square deviations between the corresponding main-chain atoms of free isomaltase and the E277Α-isomaltose complex structures and those of free isomaltase and the E277A-maltose complex structures were found to be 0.131 Å and 0.083 Å, respectively. Thus, the amino acid substitution and ligand binding do not affect the overall structure of isomaltase. In the E277A-isomaltose structure, the bound isomaltose was readily identified by electron densities in the active site pocket; however, the reducing end of maltose was not observed in the E277A-maltose structure. The superposition of maltose onto the E277A-maltose structure revealed that the reducing end of maltose cannot bind to the subsite + 1 due to the steric hindrance from Val216 and Gln279. The amino acid sequence comparisons with α-glucosidases showed that a bulky hydrophobic amino acid residue is conserved at the position of Val216 in α-1,6-glucosidic linkage hydrolyzing enzymes. Similarly, a bulky amino acid residue is conserved at the position of Gln279 in α-1,6-glucosidic linkage-only hydrolyzing α-glucosidases. Ala, Gly, or Asn residues were located at the position of α-1,4-glucosidic linkage hydrolyzing α-glucosidases. Two isomaltase mutant enzymes – V216T and Q279A – hydrolyzed maltose. Thus, the amino acid residues at these positions may be largely responsible for determining the substrate specificity of α-glucosidases.     

Reliability growth models for hardware and software systems based on nonhomogeneous Poisson processes: A survey

We summarize the reliability growth models for hardware and software systems described by a stochastic process, where the underlying stochastic process is assumed to be a nonhomogeneous Poisson process (NHPP). The background of reliability growth modelling based on an NHPP is surveyed. The Duane model, which was first postulated as a reliability growth model and is commonly used, is first explained. Secondly, the Weibull growth and modified Weibull growth models for hardware systems and the exponential type growth and gamma type growth models for error detection for software systems are discussed. The parameter estimates can be obtained by maximum likelihood estimation. Finally, the goodness-of-fit tests based on chi-square, Cramér-von Mises and Kolmogorov-Smirnov statistics are presented for the reliability growth models based on an NHPP.     

Modelling–based approach for digital control design for nonlinear WECS in the power system

The case has been established that the wind power plant must be treated as an integral part of the electric system, thereby constituting the wind energy conversion system. Recent advancement in size and technology of wind turbines requires sophisticated control systems to effectively optimize energy conversion and enhance grid integration. As a first step toward controller design, modelling has become a prerequisite. This paper explores controller design based on modelling the wind speed as a stochastic process, and the wind turbine as a multi‐mass system with a soft shaft linking the turbine with the doubly fed induction generator. A control strategy incorporating a linear quadratic Gaussian (LQG) that relies on state estimation for full‐state feedback is proposed to augment a linear controller for generator torque control. The control objectives are to reduce stresses on the drivetrain and to ensure operation geared toward optimal power conversion. This study focuses on above‐rated wind speeds, and the LQG's main purpose is to add damping to the drivetrain, thereby minimizing cyclic fatigue, while a pitch control mechanism prevents rotor overspeed, thereby maintaining rated power. Simulations show the efficacy of the proposed paradigm in meeting the control objectives. Copyright © 2009 John Wiley & Sons, Ltd.     

Moiré interferometry measurements of neartip deformation in inhomogeneous elasticplastic fracture specimens

Moiré interferometry was used for direct measurements of the crack tip behavior in the homogeneous compact tension (CT) specimens of A533B and HT80 steels, and in electron-beam welded inhomogeneous CT specimens of the two materials. These two materials have considerably different yield stresses, although their elastic properties are the same. Five types of homogeneous and inhomogeneous specimens were used in the experiment. Moiré fringe patterns of the five specimen types were directly compared for elastic, elastic-plastic and unloaded stages. Although the global deformations in terms of the load versus COD relations exhibit little inhomogeneity effects, large inhomogeneity effects were observed in the moiré fringe patterns in the elastic-plastic and unloaded stages. The near-tip deformations were also compared with the corresponding HRR singular fields. In a horizontal weld specimen, due to strong hardening in the weld region, the slope of the displacement field does not shift the characteristic HRR field for the A533B or the HT80 steel for increasing load.     

An investigation of water-gas transport processes in the gas-diffusion-layer of a PEM fuel cell by a multiphase multiple-relaxation-time lattice Boltzmann model

In order to study water-gas transport processes in the gas-diffusion-layer (GDL) of a proton exchange membrane (PEM) fuel cell system, a multiphase, multiple-relaxation-time lattice Boltzmann model is presented in this work. The model is based on the mean-field diffuse interface theory and can handle the multiphase flows with large density ratios and various viscosities. By using the standard bounce back boundary condition and an approximate average scheme for the non-slip and wetting boundary walls, respectively, detailed liquid-gas transportation in the GDL, in which exact boundary condition is difficult to be implemented, can be simulated. Unlike most of lattice Boltzmann methods based on the Bhatnagar–Gross–Krook collision operator, the present model shows a viscosity-independent velocity field, which is very important in simulating multiphase flows where various viscosities coexist. We validate our model by simulating a static droplet on a wetting wall and compare with theoretical predictions. Then, we simulate a water-gas flow in the GDL of a PEM fuel cell and investigate the saturation-dependent transport properties under different conditions. The results are shown to be qualitatively consistent with the previous numerical and theoretical works.     

Control strategy for a distributed DC power system with renewable energy

This paper deals with a DC-micro-grid with renewable energy. The proposed method is composed of a gearless wind power generation system, a battery, and DC loads in a DC distribution system. The battery helps to avoid the DC over-voltages by absorbing the power of the permanent magnet synchronous generator (PMSG) during line-fault. In addition, the control schemes presented in this paper including the maximum power point tracking (MPPT) control and a pitch angle control for the gearless wind turbine generator. By means of the proposed method, high-reliable power can be supplied to the DC distribution system during the line-fault and stable power supply from the PMSG can be achieved after line-fault clearing. The effectiveness of the proposed method is examined in a MATLAB/Simulink^® environment.     

Investigation of shielding method of ELF magnetic field generated from conductors

We have studied experimentally the shielding method of ELF magnetic field applied to the source of line conductors. For the single‐phase line current, it appears to be difficult to achieve effective shielding. On the other hand, for the balanced three‐phase conductors, including triangle and twisted configuration, a certain reduction of generated magnetic field was achieved by adjusting the configuration of conductors or by surrounding the conductors with cylindrical shielding materials made of ferromagnetic materials or nonferromagnetic metals. Normalized characteristics between phase current, distance between source current and observation point, distance between phase conductors, and the pitch of twisted cable were derived. In addition, the effect of unbalanced current was also investigated. © 2000 Scripta Technica, Electr Eng Jpn, 131(2): 12–19, 2000     

A neck‐in model in extrusion lamination process

In this study, the experiment of the extrusion lamination process using high‐pressure process low‐density polyethylene (LDPE) was performed. The nonisothermal viscoelastic simulation of the extrusion lamination experiment was also carried out. The simulation results were in good agreement with the experimental data within wide range of take up velocity and air gap length. We developed the theoretical model based on force balance and deformation type of a film to predict the neck‐in behavior in the extrusion lamination or cast film process. It was suggested from the neck‐in model that the neck‐in correlates with the ratio of planar to uniaxial elongational viscosity. It was confirmed that the neck‐in model could predict the film edge shape and neck‐in properly for conventional LDPE. POLYM. ENG. SCI., 2010. © 2009 Society of Plastics Engineers     

Pt-Al2O3 Cryogel with High Thermal Stability for Catalytic Combustion

The cryogel catalyst of platinum on alumina was prepared from aluminum sec-butoxide and H₂PtCl₆ through the sol-gel technique and subsequent freeze drying. The cryogel catalyst showed higher thermal stability of platinum than the corresponding xerogel or impregnation catalysts, which was ascribed to the more intimately developed platinum-alumina interaction accompanied by the encapsulation of the metal into the alumina cryogel. It was also shown that platinum accessibility was higher on the cryogel than on the xerogel despite the higher thermal stability of the metal on the formed than on the latter. For the VOC combustion, the cryogel exhibited higher activity than the xerogel and impregnation catalysts. Also for the methane combustion the cryogel showed higher activity, although it showed lower activity than the impregnation catalysts above 600 °C. By the addition of ceria as an additive to the cryogel catalyst, the CH₄ combustion activity was improved especially in the temperature region above 600 °C.