Non-destructive determination of acid–brix ratio of tomato juice using near infrared spectroscopy

Consumer's acceptance of tomato juice depends on its sourness to sweetness ratio and measuring this is important for quality control and marketing. Traditional methods destroy the samples, are time consuming and cannot be used in continuous packing or bottling systems. A non‐destructive method of quality evaluation, using near infrared (NIR) techniques, was tested, by using a portable NIR measuring unit. Spectra of tomato juice of known acid and brix values were determined and, in the wavelength range 703–1124 nm (NIR), a calibration model for acid–brix ratio (ABR) was developed, by using unscrambler software. When used to predict ABR of tomato juice statistical analysis showed minimal standard error (0.009) and satisfactorily high correlation coefficients (0.92) over the wavelength range 1059.5–1124.8 nm, for both calibration and prediction. These values were hardly different from analytical results and the NIR model has potential for non‐destructive prediction of ABR of tomato juice.     

Effect of plasma surface modification on electrical conduction in polyethylene

High-density polyethylene films 50 μm thick were exposed to the downstream plasma flow of RF glow discharges in argon, hydrogen, or oxygen. It was found that many transvinylene and unreacted radicals remain after the argon or hydrogen plasma treatment, and that carbonyl groups are formed in the oxygen plasma treatment. The conduction current was smaller in the hydrogen-plasma treated samples and the samples exposed to oxygen or ozone after hydrogen-plasma treatment than in the untreated samples. Thermal pulse current measurements indicate that the treated surface layer traps electrons or holes and reduces the field strength at the electrode surface, thus suppressing further injection of electrons or holes.     

Crystallization of nylon 6–clay hybrid by annealing under elevated pressure

Nylon 6–clay hybrid (NCH) is a molecular composite of nylon 6 and uniformly dispersed silicate layers of montmorillonite. We found that the phase with the high melting temperature (HMT phase) in the NCH annealed under elevated pressure. The melting temperature of the HMT phase was 240°C. Nylon 6 annealed under elevated pressure did not have the HMT phase. Thus, the presence of the HMT phase was characteristic of the NCH. The relative heat of fusion of the HMT phase (heat of fusion of HMT phase/heat of fusion in the pressure annealed NCH) increased with increase in pressure. High-pressure differential thermal analysis (DTA) measurement revealed that the temperature, at which the relative heat of fusion showed a maximum value, was below about 20°C of the melting temperature of the original NCH under elevated presssure. It was considered that the nylon 6 crystallite near the melting temperature and the molecular mobility under elevated pressure were necessary to the appearance to the HMT phase. © 1994 John Wiley & Sons, Inc.     

Application of the Gyrotron FU II Submillimeter Wave Radiation Source to Plasma Scattering Measurements

Gyrotron FU II has been successfully applied as a submillimeter wave radiation source to plasma scattering measurements on the Compact Helical System (CHS) in National Institute for Fusion Science (NIFS) in Japan. The gyrotron operates in a long pulse mode (the pulse width is about 600 ms) at a frequency of about 350 GHz (the corresponding wavelength is 0.85 mm). The output power is about 110 W. The output power is transmitted along a circular waveguide system and converted to a Gaussian-like beam by a quasi-optical antenna. After that, the beam is directed onto the CHS plasma and the scattered signal is detected by a homodyne detection system. The frequency and the wave number of the scattered signal are analyzed. The results suggest that a broad band low frequency (several tens to several hundreds kHz) density fluctuation is excited in the CHS plasma only during neutral beam injection (NBI) or ion cyclotron resonance (ICR) heating.     

Measurement method of Stokes parameters using a quarter-wave plate with phase difference errors

The Stokes parameters (S0, S1, S2, and S3) of monochromatic light can be measured using the adjustable azimuth settings of a quarter-wave plate and a polarizer. When measuring the Stokes parameters of light of an arbitrary wavelength, the measurement of S3 is affected by the phase difference error Δq(λi), due to the mismatch with respect to wavelength with the quarter-wave plate. In this method, Δq(λi), due to such a mismatch of incident light of arbitrary wavelength, can be overcome by a judicious choice of azimuth settings of the quarter-wave plate and the use of a polarizer; however, the use of a precision quarter-wave plate is necessary. The present paper proposes a measurement method of Stokes parameters of incident light of arbitrary wavelength using a quarter-wave plate with phase difference errors.     

Nonmechanical transverse scanning laser Doppler velocimeter using wavelength change

A transverse scanning laser Doppler velocimeter (LDV) that does not require any moving mechanism in its sensor probe is proposed, and the scanning function is demonstrated theoretically and experimentally. In the proposed scanning LDV, the measurement position is transversely scanned on the basis of a wavelength change induced by a tunable laser and a combination of a grating and a Dove prism. To demonstrate the scanning function in the transverse direction, an experiment was carried out using a setup of the sensor probe consisting of bulk optical components. The experimental results indicate that a transverse scanning function was successfully obtained. The scanning range in the vertical direction is estimated to be 11.3 mm over wavelengths of 1520 to 1570 nm.     

Analysis of indoor PM2.5 exposure in Asian countries using time use survey

Most household fuels used in Asian countries are solid fuels such as coal and biomass (firewood, crop residue and animal dung). The particulate matter (PM), CO, NOx and SOx produced through the combustion of these fuels inside the residence for cooking and heating has an adverse impact on people's health. PM 2.5 in particular, consisting of particles with an aerodynamic diameter of 2.5 μm or less, penetrates deep into the lungs and causes respiratory system and circulatory system diseases and so on. As a result, the World Health Organization (WHO) established guideline values for this type of particulate matter in 2005. In this study, the authors focused on PM 2.5 and estimated indoor exposure concentrations for PM 2.5 in 15 Asian countries. For each environment used for cooking, eating, heating and illumination in which people are present temporarily (microenvironment), exposure concentrations were estimated for individual cohorts categorized according to sex, age and occupation status. To establish the residence time in each microenvironment for each of the cohorts, data from time use surveys conducted in individual countries were used. China had the highest estimate for average exposure concentration in microenvironment used for cooking at 427.5 μg/m³ , followed by Nepal, Laos and India at 285.2 μg/m³, 266.3 μg/m³ and 205.7 μg/m³ , respectively. The study found that, in each country, the PM2.5 exposure concentration was highest for children and unemployed women between the ages of 35 and 64. The study also found that the exposure concentration for individual cohorts in each country was greatly affected by people's use of time indoors. Because differences in individual daily life activities were reflected in the use of time and linked to an assessment of exposure to indoor air-polluting substances, the study enabled detailed assessment of the impact of exposure.