Investigation of correlation diagram between heat transfer coefficient and void fraction under sodium–water reaction

Sodium-water reaction (SWR) in a steam generator of sodium-cooled fast reactor (SFR) is a significant phenomenon for safety assessment of the system. One of the top concerns in the SWR is an overheating rupture phenomenon in which a neighbor heat transfer tube fails instantaneously because of a deterioration of structural integrity under a high temperature condition. Hence, the heat transfer coefficient on the tube surface is of importance. Since hydrogen gas is generated in the SWR and liquid water will evaporate quickly due to depressurization, the reaction region is covered with a multi-phase flow structure, and thus the value of the heat transfer coefficient will vary widely. In the present paper, a correlation diagram has been developed between the heat transfer coefficient and the void fraction based on one dimensional homogeneous flow simulation. Furthermore, the transient of void fraction in SWAT-1R experiment is investigated using the diagram.     

用于保水保肥的聚氨酯泡沫复合材料

用质量比为5∶3的聚醚和甲苯二异氰酸酯反应,制备出聚氨酯软质泡沫.并用此材料作为高分子粘结剂,在聚氨酯发泡过程中加入高性能吸水树脂和缓释化肥,得到一种保水保肥的功能复合材料.研究了聚氨酯软质泡沫材料的配方、吸水树脂和缓释化肥加入量及加入到聚氨酯泡沫的时间对复合材料的形貌、吸水率、保水率的影响.通过栽培实验证明该复合材料能够有效地保水保肥和缓释化肥,具有良好的应用前景.     

Higher‐order structural analysis of nylon‐66 nanofibers prepared by carbon dioxide laser supersonic drawing and exhibiting near‐equilibrium melting temperature

Extended chains and/or extended chain crystals (ECC) are important structures for improving the mechanical properties of polymer fibers. ECC have so far been produced using specially prepared materials or manufacturing methods. In our study on the production of nanofibers by carbon dioxide (CO₂) laser supersonic drawing, we succeeded in producing nylon‐66 nanofibers having a high melting point near the equilibrium melting point (T_m⁰). Two melting points (T_m) of 260 and 276°C were observed for the nanofibers, with the latter temperature being close to the T_m⁰ (280°C) of nylon‐66. A nanofiber that was heat treated at 279°C for 10 min displayed a large stacked lamellar structure with an average crystal thickness of 140 nm. That value was close to the average molecular chain length of 212 nm, which was calculated from the average molecular weight of the nanofibers. It was inferred from these results that ECC corresponding to the average molecular chain length were present in the nanofibers. The CO₂ laser supersonic drawing process is applicable to general purpose thermoplastic polymers and uses a simple drawing system. It is expected that this drawing method will help to improve the fundamental performance of general purpose polymers. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40361.     

Influence of high molecular weight polypeptides on the mouthfeel of commercial beer

Low malt beers have high sales volumes in Japan, but improving their mouthfeel, including softness, smoothness and decreasing astringency, is challenging because the compounds responsible remain unclear. In this study, beer was fractionated by preparative size‐exclusion chromatography, with the polypeptide and maltodextrin fractions purified using solid‐phase extraction and ion‐exchange resin. Sensory data from a spike test showed that the mouthfeel (softness, smoothness, and reduced astringency) of low malt beer was improved both by the degree of polymerisation (DP) of maltodextrins (DP of 2‐10; at increased concentration of 40 to 60%; P < 0.01) and by 10 ‐ 20 kilodalton (kDa) high molecular weight (HMW) polypeptide and 2‐3 kDa low molecular weight polypeptide fractions (at a 50% increase in concentration; P < 0.01). Furthermore, highly purified 10 to 20 kDa HMW polypeptides improved the softness and smoothness and decreased the astringency (at a 25% increase in concentration). This report is the first to provide experimental sensory data indicating that HMW polypeptides improve the mouthfeel of beer. Based on these findings, a new low malt beer was developed that showed significantly higher levels of the 10‐20 kDa HMW polypeptides with an overall improved mouthfeel. Mass spectrometric analysis of the 10 to 20 kDa proteins identified several unique foam positive proteins, including barley dimeric alpha‐amylase inhibitor‐1 and non‐specific lipid‐transfer protein 1. These 10‐20 kDa HMW proteins are likely to be responsible for the improved mouthfeel of beer. © 2020 Kirin Holdings Kabushik Kaisha Co. Ltd. Journal of the Institute of Brewing published by John Wiley & Sons Ltd on behalf of The Institute of Brewing & Distilling     

天然高分子柿单宁的研究与应用

柿单宁是一种资源丰富、价廉易得的天然高分子材料,是近年来发展迅速的一种环境友好型功能材料,受到愈来愈广泛的重视,并在许多领域得到了应用.叙述了天然高分子柿单宁的制备方法、结构、研究及其应用进展和最新的研究方向.     

Thermal stability of back side metallization multilayer for power device application

Metallization multilayers on the back side of a power device were focused in this study. Si wafers coated with high melting point metals were exposed at 300 °C for 300 h to investigate diffusion condition of the metallization layer. We developed and examined the thermal stability of die bonding material (Au paste) including sub–micrometer–sized Au particles. Auger electron spectroscopy was applied to observe the atomic composition of the multilayers in depth direction after the high temperature aging. Surface morphology was observed using optical microscope and scanning electron microscope. While atomic composition on Ti/Au changed drastically after the high temperature aging, other multilayers maintained their metallization composition. However, the surface morphology was slightly changed on Ti/Ru/Au, W/Au, and Ta/Au. Bond strength on the Ti/Pt/Au kept over 40 MPa with unified bonding layer after exposing at 300 °C for 1000 h.