Identification of nanobacteria in human arthritic synovial fluid by method validated in human blood and urine using 200 nm model nanoparticles

Earlier we introduced a biosensor for the identification of nanobacteria in water drops. Here, we generalize its principle and apply it to identify nanobacteria in synovial fluid from a patient with osteoarthritis. Results indicate the prevalence of nanobacteria in the synovial fluid. The identification method is applicable to body fluids such as unfiltered human blood and urine, is independent of culturing procedures, and permits for a rapid detection of nanoparticles in liquid drops. In view of increasing clinical evidence on a contribution of nanobacteria in disease, their reported detection in HIV-infected people in South Africa, laboratory experiments indicating the excretion of viable (i.e., propagating) nanobacteria from humans via urine, the use of human excreta in agricultural irrigation, models predicting an injection of nanoaerosols contained in irrigation water enriched with human excreta into the atmosphere, and the identification of nanobacteria in the terrestrial atmosphere, promote the identification method described in this work to an important tool to monitor nanobacteria in body fluids and environmental samples.     

Phytoextraction by a high-Cd-accumulating rice: reduction of Cd content of soybean seeds

Soybeans (Glycine max (L) Merr.) are the major summer crop grown in Japanese upland fields (characterized by aerobic soil) that have been converted from paddies. To evaluate the effect of phytoextraction by rice on the seed cadmium (Cd) content of soybeans grown subsequently, we grew Milyang 23, a high-Cd-accumulating rice cultivar, and then grew soybeans in three paddy soils contaminated with moderate Cd concentrations (2.50-4.27 mg Cd kg(-1)). The rice accumulated 7-14% of the total soil Cd in its shoots. The soybean seed Cd contents were 24-46% less than those grown on control soils. Phytoextraction by Milyang 23 rice is thus a promising remediation method for reducing seed Cd contents of soybeans grown on paddy soils under aerobic soil conditions.     

A method for testing the interface toughness of ceramic environmental barrier coatings (EBCs) on ceramic matrix composites (CMCs)

A simple interface fracture test for ceramic environmental barrier coatings (EBCs) on ceramic matrix composites (CMCs) was developed. A variation on the asymmetric double cantilever beam (ADCB) test was proposed so that the interface toughness could be measured in a small specimen of simple shape without applying interlaminar loading to the CMC substrate. The proposed test was applied to an EBC consisting of a mullite layer and Si bond coat on a monolithic SiC substrate. A pre-crack was introduced by pop-in cracking, and then a notch overlapping the pre-crack was machined. The pre-crack was opened by inserting a wedge into the notch. From the critical notch opening displacement the crack starts to propagate, interface toughness is calculated. The measured interface toughness was 4.1?J/m2. Finally, the application range of the test was discussed and suggestions were made for introduction of the notch and pre-crack.     

Coordinate-Based Evaluation of Two Dimensional Artefact Calibration Value as the Reference Standards for Coordinate Measuring Machines

Two dimensional standards are important materials which are used in the calibration and the verification of coordinate measuring machines. In several countries, the national metrology institutes or accredit laboratories provide the calibration services of the two dimensional standards such as ball plates, hole plates and grid plates. The metrological equivalence of the measurement standards among the calibration providers is validated through the key comparison program. In the previous key comparison for a ball plate and a hole plate, the equivalences among the participants’ calibration results were verified on the distances between the No. 1 ball/hole (i.e., the origins of the workpiece coordinates) and other balls/holes on the plates respectively. The essential measurands of the two dimensional standards are the coordinates of the feature points, however, the measurement equivalences on them have not been verified. In this study, the authors propose the coordinates-based evaluation of the reference values and their uncertainty in two dimensional standard calibration comparison.     

Measurements of thermal-neutron capture cross-section of Cesium-135 by applying mass spectrometry

ABSTRACT

The thermal-neutron capture cross-section (σ₀) and resonance integral (I₀) were measured for the ¹³⁵Cs(n,γ)¹³⁶Cs reaction by an activation method and mass spectrometry. Because of difficulty in the preparation of pure ¹³⁵Cs samples, we used ¹³⁵Cs contained as an impurity in a normally available ¹³⁷Cs standard solution. An isotope ratio of ¹³⁵Cs and ¹³⁷Cs in a standard ¹³⁷Cs solution was measured by mass spectrometry to quantify ¹³⁵Cs. Cesium-135 impurity along with the ¹³⁷Cs standard solution was irradiated at the hydraulic conveyer of the research reactor in the Institute for Integral Radiation and Nuclear Science, Kyoto University. Wires of Co/Al and Au/Al alloys were used as neutron monitors to measure thermal-neutron fluxes and epi-thermal Westcott’s indices at an irradiation position. A gadolinium filter was used to measure the σ₀, and a value of 0.133 eV was taken as the cut-off energy. Gamma-ray spectroscopy was used to measure induced activities of ¹³⁷Cs, ¹³⁶Cs and monitor wires. On the basis of Westcott’s convention, the σ₀ and I₀ values were derived as 8.57 ± 0.25 barn, and 45.3 ± 3.2 barn, respectively. The value of σ₀ obtained in the present study agreed within the limits of uncertainties with the past-reported value of 8.3 ± 0.3 barn.     

Molecular structures of traction fluids in relation to traction properties

In order to develop excellent traction fluids, guidelines for molecular design were studied through analyzing correlation between molecular structures and traction properties of traction fluids quantitatively. Some results among various simple compounds as model compounds of traction fluids and among various traction fluids were described in this article. This revised version was published online in June 2006 with corrections to the Cover Date.     

Electron cyclotron resonance plasma production by using pulse mode microwaves and dependences of ion beam current and plasma parameters on the pulse condition

We measure the ion beam current and the plasma parameters by using the pulse mode microwave operation in the first stage of a tandem type ECRIS. The time averaged extracted ion beam current in the pulse mode operation is larger than that of the cw mode operation with the same averaged microwave power. The electron density n(e) in the pulse mode is higher and the electron temperature T(e) is lower than those of the cw mode operation. These plasma parameters are considered to cause in the increase of the ion beam current and are suitable to produce molecular or cluster ions.