Formation of carbon nanotubes through ethylene decomposition over supported Pt catalysts and silica-coated Pt catalysts

Ethylene decomposition was performed over supported Pt catalysts to fabricate composites of Pt metal nanoparticles and carbon nanotubes (CNTs). All supported Pt catalysts (Pt/carbon black, Pt/CNT, Pt/MgO, Pt/Al₂O₃ and Pt/SiO₂) showed catalytic activity for ethylene decomposition at 973 K to form CNTs. Pt metal particles were found at tips of CNTs. These results indicate that Pt metal particles have catalytic activity for growth of CNTs through hydrocarbon decomposition. A broad range (5-50 nm) of CNT diameters were formed from the use of supported Pt metal catalysts although Pt metal particles in the catalysts before ethylene decomposition were relatively uniform in size (2-5 nm). These results imply that Pt metal particles in the catalysts aggregated during ethylene decomposition at 973 K. Aggregation of Pt metal particles in catalysts during ethylene decomposition could be suppressed by covering catalysts with silica layers that were a few nanometers thick. Silica-coated Pt catalysts showed high activity for ethylene decomposition to form CNTs with uniform diameters (8-10 nm) despite the uniform coverage of Pt metal particles with silica layers.     

Development of In Vitro and In Vivo Evaluation Systems for Vitamin D Derivatives and Their Application to Drug Discovery

We have developed an in vitro system to easily examine the affinity for vitamin D receptor (VDR) and CYP24A1-mediated metabolism as two methods of assessing vitamin D derivatives. Vitamin D derivatives with high VDR affinity and resistance to CYP24A1-mediated metabolism could be good therapeutic agents. This system can effectively select vitamin D derivatives with these useful properties. We have also developed an in vivo system including a Cyp27b1-gene-deficient rat (a type I rickets model), a Vdr-gene-deficient rat (a type II rickets model), and a rat with a mutant Vdr (R270L) (another type II rickets model) using a genome editing method. For Cyp27b1-gene-deficient and Vdr mutant (R270L) rats, amelioration of rickets symptoms can be used as an index of the efficacy of vitamin D derivatives. Vdr-gene-deficient rats can be used to assess the activities of vitamin D derivatives specialized for actions not mediated by VDR. One of our original vitamin D derivatives, which displays high affinity VDR binding and resistance to CYP24A1-dependent metabolism, has shown good therapeutic effects in Vdr (R270L) rats, although further analysis is needed.     

Mechanistic study of the reduction of copper oxides in alkaline solutions by electrochemical impedance spectroscopy

Electrochemical impedance spectroscopy was used to study the mechanism by which copper oxides are reduced in alkaline solutions. For the reductions of CuO and Cu₂O, a capacitive loop and also an inductive loop under certain conditions were observed in the complex plane. The electrochemical impedance for CuO reduction was not greatly dependent on the solution alkalinity and the kind of alkali hydroxide. However, the electrochemical impedance for Cu₂O reduction was considerably affected by the kind and concentration of alkali hydroxide. The diameter of the capacitive loop, i.e., the charge-transfer resistance (R_ct), was increased with increase in solution alkalinity. It should also be noted that R_ct was increased in the order of KOH < NaOH < LiOH. These dependences were consistent with the good separation between the reduction potentials of CuO and Cu₂O in chronopotentiometric and voltammetric measurements with strongly alkaline electrolytes containing Li⁺. The inductive loop observed for the Cu₂O reduction at higher concentrations of KOH (>6 M) and LiOH (>0.2 M) suggested the existence of an intermediate species (probably CuOH). The specific inhibitory effect of Li⁺ ions on the reduction of Cu₂O might be explained by a possible stabilization of CuOH by Li⁺ ions.     

A Two-dimensional Stress Analysis and Strength of Single-lap Adhesive Joints of Dissimilar Adherends Subjected to External Bending Moments

The stress distributions of single-lap adhesive joints of dissimilar adherends subjected to external bending moments are analyzed as a three-body contact problem by using a two-dimensional theory of elasticity (plane strain). In the analysis, dissimilar adherends and an adhesive are replaced by finite strips. In the numerical calculations, the effects of the ratio of Young's moduli of adherends, the adherend thickness ratio and the adherend length ratio between dissimilar adherends on the stress distributions at the interfaces are examined. The results show that the stress singularity occurs at the ends of the interfaces, and its intensity is greater at the interface of the adherend with smaller Young's modulus. It is also noted that the singular stress is greater at the interface of the thinner adherend. It is found that the effect of the adherend length ratio on the stress singularity at the interfaces is very small. Joint strength is predicted by using the interface stress and it was measured by experiments. From the analysis and the experiments, it is found that the joint strength increases as Young's modulus of adherends and the adherend thickness increase while the effect of the adherend lengths on the joint strength is small. For verification of the analysis, a finite element analysis (FEA) is carried out. A fairly good agreement of the interface stress distribution is seen between the analytical and the FEA results.     

Reductive decomposition of nitrate ion to nitrogen in water on a unique hollandite photocatalyst

Photocatalysis of a hollandite compound K_xGa_xSn_8−xO₁₆ (x = ca. 1.8) was examined for the reduction of nitrate ion with a reducing agent of methanol in water under UV irradiation. Hollandites have a characteristic one-dimensional tunnel structure. The hollandite powder, which was prepared by the sol–gel method and unloaded with any additives like metals, was used as the photocatalyst and its photocatalytic reaction was analyzed quantitatively by using ion chromatography and on-line mass spectrometry, and its reaction mechanism was analyzed by in-situ FT-IR. The hollandite photocatalyst showed a significant activity for the formation of N₂ from NO₃⁻. The nitrate was reduced to N₂ and NO₂⁻, while the reducing agent methanol was partly oxidized to change to formic acid. The conversion of NO₃⁻was proportional to the yields of N₂, NO₂⁻, and HCOO⁻. The present photocatalyzed decomposition of NO₃⁻ to N₂ would be a useful photocatalysis for the environmental protection of water.     

Deposition and structural analyses of molybdenum-disulfide (MoS2)–amorphous hydrogenated carbon (a-C:H) composite coatings

In this study we developed composite coatings consisting of amorphous hydrogenated carbon (a-C:H) and molybdenum-disulfide (MoS₂), and clarified their microstructure. In addition, we interpreted the tribological properties of the composite coatings in the viewpoint of a deposition-induced microstructural modification. The coatings were produced by the hybrid deposition technique of RF-generated methane and argon plasma and DC magnetron co-sputtering of MoS₂ target. The deposition parameter investigated in this study was methane flow rate. Structural analyses were performed using a transmission electron microscope (TEM) and an atomic force microscope (AFM). Friction tests were conducted using a ball-on-disk type tribometer. From an electron micrograph, it was confirmed that nano-clusters were embedded into an amorphous carbon host matrix. Surface roughness of the composite coating was ～ 0.25 nm in R_a compared to 5.0 nm in R_a of sputtered MoS₂. The concentration measurements were performed, and the results show that the sulfur and molybdenum concentration ratio, [S]/[Mo], is ～ 0.9, which indicates that the amount of sulfur was reduced due to the discharged plasma. In friction tests, composite coatings showed high friction in a vacuum condition. It was considered that lubricant MoS₂ lamellar structures showing super-low friction in a vacuum condition during friction could not be formed between ball and coating during friction because of the lack of sulfur in embedded clusters.     

Anisotropic in vitro vessel model using poly(vinyl alcohol) hydro gel and mesh material

In the present study, the authors fabricated straight multilayer hybrid tubular in vitro vessel models (inner diameter D_in = 10 mm; thickness T = 4 mm) composed of poly(vinyl alcohol) hydrogel (PVA‐H) and anisotropic mesh materials. The authors performed tensile, stress‐relaxation and cyclic‐tensile tests using axial and circumferential test pieces as well as pressure‐diameter (P‐D) tests using tubular test piece. In the tensile and stress‐relaxation tests, the anisotropic and nonlinear mechanical properties and hysteresis characteristic of the in vitro models were confirmed. The in vitro models also showed behavior qualitatively similar to that of native arteries in cycle‐tensile and P‐D tests. These results demonstrate that the mechanical properties of native vessels can be duplicated in an in vitro model by controlling the components of the mesh material, the orientation of elastic fibers in the mesh material, and the concentration and thickness of PVA‐H layers. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Effect of toughness distribution in the thickness direction on long brittle crack propagation/arrest behaviour of heavy gauge shipbuilding steel

ABSTRACT

Brittle crack arrestability of the heavy gauge steel plates for shipbuilding is now an important issue for the recent mega container ships. In the present work, the brittle crack arrestability of the steel plate with different toughness distributions in thickness is examined in ultra-wide duplex ESSO tests. It is examined whether a running long brittle crack arrests or not in flat temperature condition in ultra-wide duplex ESSO test that are harder mechanical conditions similar to an actual ship hull condition. Test temperatures are selected at which arrest toughness, Kca, evaluated by temperature gradient type standard ESSO test is the same for two test plates. The steel plate with higher toughness in mid-thickness (t/2) than that in quarter thickness (t/4) could arrest a running long brittle crack although the plate with lower toughness in mid-thickness than that in quarter thickness could not arrest it. The typical split-nail shape appeared at the arrested crack front in the plate with higher toughness in mid-thickness than that in quarter thickness. The numerical analyses also demonstrate that the local stress intensity factor at the arrested crack tip is changing sensitively to the crack front shape. It suggests that the higher brittle crack arrestability appears due to the split-nail shape of the arrested crack front enhanced by the inhomogeneous toughness in thickness.     

Crystallographic analysis for acicular ferrite formation in low carbon steel weld metals

Inclusions contributing to acicular ferrite nucleation were investigated from a crystallographic point of view in low carbon low alloy steelweld metals. The samples from electro slag welding (ESW) and submerged arc welding (SAW) deposits with various cooling rates were prepared in this study. In those samples, intragranular acicular ferrite formation was observed from inclusions. The inclusions contributing to acicular ferrite formation were of multi-phase type consisting of amorphous phase, spinel type and MnS. They were surrounded by a Ti-enriched layer. It was confirmed by selected area diffraction patterns and energy-dispersive X-ray spectrometer analyses that the Ti-enriched layer was TiO. The acicular ferrite had a Baker–Nutting orientation relationship with the TiO layer on the inclusion surface. The misfit was 3.0% at the interface between the acicular ferrite and TiO. Therefore, it is considered that TiO on the inclusion surface contributes to the heterogeneous nucleation of acicular ferrite by small lattice misfit. However, themorphologies of ferrite growth which nucleated from inclusions were different in both samples. Whereas the growth of ferrites nucleated from TiO was enough in ESW, the size of nucleated ferrite in SAW was a few hundred millimetres in size. In the early stage of nucleation from TiO, ferrite had small deviation from Kurdjumov–Sachs orientation relationship (K–S relationship) in both ESW and SAW. However, there was a difference in the growth stage of ferrite. The ferrite orientations were gradually changed to fit to the K–S relationship in ESW. On the other hand, the nucleated ferrite in SAW stopped growing and the newly nucleated ferrite which had K–S relationship prior to austenite was formed adjacently because of large super cooling due to small heat input.