Present status of the High Temperature Engineering Test Reactor (HTTR)

In Japan, the research and development on the High Temperature Gas-cooled Reactors (HTGRs) had been carried out for more than fifteen years since 1969 as the multi-purpose Very High Temperature gas-cooled Reactor (VHTR) program for direct utilization of nuclear process heat such as nuclear steel making. Recently, reflecting the change of the social and energy situation and with less incentives for industries to introduce such in the near future, the JAERI changed the program to a more basic ‘HTTR program’ to establish and upgrade the HTGR technology basis.The HTTR is a test reactor with a thermal output of 30 MW and reactor outlet coolant temperature of 950°C, employing a pin-in-block type fuel block, and has the capability to demonstrate nuclear process heat utilization using an intermediate heat exchanger. Since 1986 a detailed design has been made, in which major systems and components are determined in line with the HTTR concept, paying essential considerations into the design for achieving the reactor outlet coolant temperature of 950°C. The safety review of the Government started in February 1989. By request of the Science and Technology Agency the Reactor Safety Research Association reviewed the safety evaluation guideline, general design criteria, design code and design guide for the graphite and the high-temperature structure of the HTTR.The installation permit of the HTTR was issued by the Government in November 1990.     

Nanovesicles Based on Mixtures of a Biantennary Glycolipid with Ionic Co‐Surfactants

A biantennary surfactant based on a synthetic C₁₆‐maltoside was chosen to prepare vesicles for a potential vesicular drug delivery system. The synthesis comprised of three stages: Initial synthesis of β‐d ‐maltose octaacetate was followed by glycosidation of 2‐hexyl‐decanol and final glycolipid deacetylation. Both α‐ and β‐anomers were prepared and their anomeric purity was evaluated by ¹H NMR. Owing to the low water solubility of the glycolipid, addition of ionic co‐surfactants was believed to promote the surfactant distribution, thus leading to smaller and more uniform vesicles. The assembly behavior of the surfactant systems was studied by contact penetration under an optical polarizing microscope, while interfacial properties were determined by surface tension measurements. Vesicles were prepared by injection of an ethanolic solution into bulk water and investigated by dynamic light scattering and field emission scanning electron microscopy. Contact of the surfactant mixtures with water indicated a high tendency to exhibit the lamellar phase and confirmed the expected low molecular solubility. These findings suggest a potential of the surfactant to form stable vesicles. Injection of an ethanolic surfactant solution into bulk water gave sub‐micrometer sized vesicles with a narrow size distribution. Application of ionic co‐surfactants reduced the vesicle size. In particular ～20 % of anionic SDS proved highly effective, lowering the vesicle size by nearly one decade, thus accessing nano‐sized vesicles. Encapsulation of a water‐soluble drug was achieved in a 76 ± 10 % efficiency.     

锂离子单电池强制内部短路试验

本文阐述了JISC8714：2007标准中单电池强制内部短路试验条件和方法,说明了各个试验步骤的要求和意图,总结了内部短路试验的注意事项,介绍了试验设备,并对强制内部短路试验的有效性进行了探讨。     

Effects of hydroperoxide in breads on IgE antibody responses

The effect of hydroperoxide in breads on antigen-antibody reaction against IgE was examined. We compared the antigen-antibody reaction against IgE between dough including hydroperoxide and that not including hydroperoxide. Crude proteins extracted from the dough including hydroperoxide showed weak antigen-antibody reaction on allergic tests such as ring precipitin test with human-specific IgE, and the IgE binding activity on ELISA. In contrast, the dough without hydroperoxide showed antigen-antibody reaction. The crude proteins extracted from the dough with hydroperoxide or without hydroperoxide were applied by affinity chromatography of trypsin-immobilized chitin. Then proteins having affinity were recovered. The recovered proteins were separated by SDS-PAGE. Each protein was examined for the IgE binding activity on ELISA. The IgE binding activity of baked bread was studied as well. Crude proteins of baked bread made from dough including hydroperoxide showed weaker IgE binding activity on ELISA than proteins of baked bread made from dough without hydroperoxide. Those results suggested that addition of hydroperoxide into dough affects on antigen activation.     

Characterization of matched systems

A new principle of control system design called matching was recently introduced by Zakian. The principle requires the designer to choose a controller which makes a system match its environment. Characterization of matched controllers by means of Youla parameterization is discussed in this paper. Sufficient conditions for matching are given in the form of inequality constraints on the norm of the free parameters in the parametrizations based on nominal matched controllers.     

Robust scene recognition using a GA and real-world raw-image

This paper presents a new concept of scene recognition by a genetic algorithm (GA), using the 2-D gray-scale image of a working space, termed here as raw-image, and a model shaping the 2-D top-surface of a target object. In fact here, the problem of object recognition in the raw-image is changed into an optimization problem of a model-based evaluation function. We make use in this research of a GA, as a search and optimization method. This GA employs a model-based fitness function as its objective function to perform the search of a target in the raw-image. In this research, three object models, namely a frame model, a surface model, and a surface-strips model are investigated in order to determine which one is the best for scene recognition in a noisy environment. Also, in order to appraise the recognition performance of each model, a comparative study is performed by analyzing the answers to the following criteria questions: sensitivity, reliability, and speed. The effectiveness of the method has been verified through experiments using real-world raw-images, and the method has shown its robustness of object recognition with the surface-strips model, in spite of the noises in the scene.     

Proposal of limit moment equation applicable to planar/non-planar flaw in wall thinned pipes under bending

In this paper, a limit bending moment equation applicable to all types of planar and non-planar flaws in wall-thinned straight pipes under bending was proposed. A system to rationally classify the planar/non-planar flaws in wall-thinned pipes was suggested based on experimental observations focused on the fracture mode. The results demonstrate the importance of distinguishing between axial and circumferential long flaws in wall-thinned pipes.     

Crystallographic analysis for acicular ferrite formation in low carbon steel weld metals

Inclusions contributing to acicular ferrite nucleation were investigated from a crystallographic point of view in low carbon low alloy steelweld metals. The samples from electro slag welding (ESW) and submerged arc welding (SAW) deposits with various cooling rates were prepared in this study. In those samples, intragranular acicular ferrite formation was observed from inclusions. The inclusions contributing to acicular ferrite formation were of multi-phase type consisting of amorphous phase, spinel type and MnS. They were surrounded by a Ti-enriched layer. It was confirmed by selected area diffraction patterns and energy-dispersive X-ray spectrometer analyses that the Ti-enriched layer was TiO. The acicular ferrite had a Baker–Nutting orientation relationship with the TiO layer on the inclusion surface. The misfit was 3.0% at the interface between the acicular ferrite and TiO. Therefore, it is considered that TiO on the inclusion surface contributes to the heterogeneous nucleation of acicular ferrite by small lattice misfit. However, themorphologies of ferrite growth which nucleated from inclusions were different in both samples. Whereas the growth of ferrites nucleated from TiO was enough in ESW, the size of nucleated ferrite in SAW was a few hundred millimetres in size. In the early stage of nucleation from TiO, ferrite had small deviation from Kurdjumov–Sachs orientation relationship (K–S relationship) in both ESW and SAW. However, there was a difference in the growth stage of ferrite. The ferrite orientations were gradually changed to fit to the K–S relationship in ESW. On the other hand, the nucleated ferrite in SAW stopped growing and the newly nucleated ferrite which had K–S relationship prior to austenite was formed adjacently because of large super cooling due to small heat input.     

Microstructure and Thermoelectric Properties of Dense YB<Subscript>22</Subscript>C<Subscript>2</Subscript>N Samples Fabricated Through Spark Plasma Sintering

Dense samples of the higher boride YB₂₂C₂N have been fabricated through the spark plasma sintering (SPS) method with different sintering aids. YB₂₂C₂N is a representative of a series of newly discovered rare-earth borocarbonitrides, which may be the long-awaited n-type counterpart of boron carbide, “B₄C.” The effect of Si, SiC, Al, and TiC additions on the sintering process of YB₂₂C₂N has been studied. The best sintered bodies with densities higher than 90% of theoretical density were obtained by means of SPS at 1700°C. We show that the additive choice and pressure have an effect on grain size and density. An investigation of the effect of atmosphere on the sintering behavior has also been carried out. It was found that sinterability is enhanced under nitrogen atmosphere. Thermoelectric properties of the materials sintered with additives have been evaluated, and we discuss their dependences on the fabrication process route.     

ALP住宅

精选理由日本住宅在设计上讲究"小、巧、精致、舒适"的实用主义,特别是在集合住宅中,更会将精致与实用相结合。本案例中,建筑师以折叠的立面挑战传统建筑中方盒子形状的体量,用对角线替代绝对水平及绝对垂直线条,操弄开放与闭合之间的关系,营造实用生活空间的同时不忘精致效果。