Development of X-ray dark-field imaging towards clinical application

Review of X-ray dark-field imaging under development is presented. Its goal is its application to clini-cal diagnosis of organs that have been invisible by the ordinary techniques. In order to clinically visualize tissues in detail one needs high contrast and high spatial resolution say～50μm. This X-ray optics comprises a Bragg asymmet-ric monochro-collimator and a Bragg case or a Laue case filter with capability of analyzing angle in a parallel posi-tion. Their diffraction index is 4,4,0 and the X-ray energy 35 keV (λ=0.0354 nm). The filter has 0.6 mm thickness in the Bragg case or 1.075 mm or 2.15 mm thickness in the Laue case. Under this condition only the refracted X-rays from object can transmit through the filter while the beam that may receive absorption and/or phase change will not.Soft tissues at human joints thus taken show high contrast images so that the DFI is promising for clinical diagnosis.Preliminary X-ray absorption images of another clinical candidates of ear bones are also shown.     

Steep fronts at transient recovery voltages appearing with the interruption of inrush currents of transformers

High lightning overvoltages do not appear in underground substations connected to transmission cables. Consequently, it is very important to thoroughly investigate switching overvoltages and to achieve rational insulation coordination for apparatus installed in such underground substations. This paper discusses the occurrence of steep fronts at transient recovery voltages (TRV) appearing at circuit breakers when the inrush currents of transformers are interrupted. Caused by a steep front at the TRV, reignitions occur at circuit breakers, resulting in the generation of high overvoltages with high frequencies. The overvoltages are among the highest switching overvoltages appearing at the terminal of a transformer. The authors clarified the mechanism of the generation of steep fronts at TRV by means of EMTP analysis, as well as by carrying out tests in a high‐power laboratory. © 2001 Scripta Technica, Electr Eng Jpn, 135(1): 24–32, 2001     

Mechanical Properties of Human Concentrated Growth Factor (CGF) Membrane and the CGF Graft with Bone Morphogenetic Protein-2 (BMP-2) onto Periosteum of the Skull of Nude Mice

Concentrated growth factor (CGF) is 100% blood-derived, cross-linked fibrin glue with platelets and growth factors. Human CGF clot is transformed into membrane by a compression device, which has been widely used clinically. However, the mechanical properties of the CGF membranes have not been well characterized. The aims of this study were to measure the tensile strength of human CGF membrane and observe its behavior as a scaffold of BMP-2 in ectopic site over the skull. The tensile test of the full length was performed at the speed of 2mm/min. The CGF membrane (5 × 5 × 2 mm³) or the CGF/BMP-2 (1.0 μg) membrane was grafted onto the skull periosteum of nude mice (5-week-old, male), and harvested at 14 days after the graft. The appearance and size of the CGF membranes were almost same for 7 days by soaking at 4 °C in saline. The average values of the tensile strength at 0 day and 7 days were 0.24 MPa and 0.26 MPa, respectively. No significant differences of both the tensile strength and the elastic modulus were found among 0, 1, 3, and 7 days. Supra-periosteal bone induction was found at 14 days in the CGF/BMP-2, while the CGF alone did not induce bone. These results demonstrated that human CGF membrane could become a short-term, sticky fibrin scaffold for BMP-2, and might be preserved as auto-membranes for wound protection after the surgery.     

Synthesis of Reactive Sulfur Species in Cultured Vascular Endothelial Cells after Exposure to TGF-β1: Induction of Cystathionine γ-Lyase and Cystathionine β-Synthase Expression Mediated by the ALK5-Smad2/3/4 and ALK5-Smad2/3-ATF4 Pathways

Transforming growth factor-β₁ (TGF-β₁) occurs at high levels at damage sites of vascular endothelial cell layers and regulates the functions of vascular endothelial cells. Reactive sulfur species (RSS), such as cysteine persulfide, glutathione persulfide, and hydrogen persulfide, are cytoprotective factors against electrophiles such as reactive oxygen species and heavy metals. Previously, we reported that sodium trisulfide, a sulfane sulfur donor, promotes vascular endothelial cell proliferation. The objective of the present study was to clarify the regulation and significance of RSS synthesis in vascular endothelial cells after exposure to TGF-β₁. Bovine aortic endothelial cells in a culture system were treated with TGF-β₁ to assess the expression of intracellular RSS, the effect of RSS on cell proliferation in the presence of TGF-β₁, induction of RSS-producing enzymes by TGF-β₁, and intracellular signal pathways that mediate this induction. The results suggest that TGF-β₁ increased intracellular RSS levels to modulate its inhibitory effect on proliferation. The increased production of RSS, probably high-molecular-mass RSS, was due to the induction of cystathionine γ-lyase and cystathionine β-synthase, which are RSS-producing enzymes, and the induction was mediated by the ALK5-Smad2/3/4 and ALK5-Smad2/3-ATF4 pathways in vascular endothelial cells. TGF-β₁ regulates vascular endothelial cell functions such as proliferation and fibrinolytic activity; intracellular high-molecular-mass RSS, which are increased by TGF-β₁, may modulate the regulation activity in vascular endothelial cells.     

Characterization of BAMO/NMMO Copolymers

The compositions and microstructures, thermolyses, and sensitivities of 3,3-bis(azidomethyl)oxetane (BAMO) copolymers with 3-nitratomethyl-3-methyloxetane (NMMO) were characterized. The molar ratios of monomers fed in the copolymerizations were: BAMO/NMMO = 8/2, 7/3, and 6/4. The observed compositions were 81/19, 68/32, and 60/40, respectively. The relative compositions of trade microstructures were also exactly the same as theoretical values. The copolymerization of BAMO with NMMO behaved like an ideal system in the sense that the copolymer has approximately the same composition as the monomer fed. The microstructures of copolymers were also randomly arranged. Poly BAMO showed side chain decomposition in the initial stage of the thermolysis, on the other hand, backbone decomposition controlled the thermolysis of poly NMMO. The BAMO units and the NMMO units appeared to decompose more or less independently of one another and retained their individual decomposition characteristics despite being copolymerized. However, the heat generated by the NMMO decomposition, which occurred at 40°C lower than that of BAMO. activated the reaction of BAMO. Poly B/N(7/3) showed very interesting characteristics in sensitivities, mechanical properties, and the heat of decomposition.     

TGF-β1 Potentiates the Cytotoxicity of Cadmium by Induction of a Metal Transporter,ZIP8, Mediated by the ALK5-Smad2/3 and ALK5-Smad3-p38 MAPK Signal Pathways in Cultured Vascular Endothelial Cells

Vascular endothelial cells cover the luminal surface of blood vessels in a monolayer and play a role in the regulation of vascular functions, such as the blood coagulation-fibrinolytic system. When the monolayer is severely or repeatedly injured, platelets aggregate at the damaged site and release transforming growth factor (TGF)-β₁ in large quantities from their α-granules. Cadmium is a heavy metal that is toxic to various organs, including the kidneys, bones, liver, and blood vessels. Our previous study showed that the expression level of Zrt/Irt-related protein 8 (ZIP8), a metal transporter that transports cadmium from the extracellular fluid into the cytosol, is a crucial factor in determining the sensitivity of vascular endothelial cells to cadmium cytotoxicity. In the present study, TGF-β₁ was discovered to potentiate cadmium-induced cytotoxicity by increasing the intracellular accumulation of cadmium in cells. Additionally, TGF-β₁ induced the expression of ZIP8 via the activin receptor-like kinase 5-Smad2/3 signaling pathways; Smad3-mediated induction of ZIP8 was associated with or without p38 mitogen-activated protein kinase (MAPK). These results suggest that the cytotoxicity of cadmium to vascular endothelial cells increases when damaged endothelial monolayers that are highly exposed to TGF-β₁ are repaired.     

Effects of Substitution on Cytotoxicity of Diphenyl Ditelluride in Cultured Vascular Endothelial Cells

Among organic–inorganic hybrid molecules consisting of organic structure(s) and metal(s), only few studies are available on the cytotoxicity of nucleophilic molecules. In the present study, we investigated the cytotoxicity of a nucleophilic organotellurium compound, diphenyl ditelluride (DPDTe), using a cell culture system. DPDTe exhibited strong cytotoxicity against vascular endothelial cells and fibroblasts along with high intracellular accumulation but showed no cytotoxicity and had less accumulation in vascular smooth muscle cells and renal epithelial cells. The cytotoxicity of DPDTe decreased when intramolecular tellurium atoms were replaced with selenium or sulfur atoms. Electronic state analysis revealed that the electron density between tellurium atoms in DPDTe was much lower than those between selenium atoms of diphenyl diselenide and sulfur atoms of diphenyl disulfide. Moreover, diphenyl telluride did not accumulate and exhibit cytotoxicity. The cytotoxicity of DPDTe was also affected by substitution. p-Dimethoxy-DPDTe showed higher cytotoxicity, but p-dichloro-DPDTe and p-methyl-DPDTe showed lower cytotoxicity than that of DPDTe. The subcellular distribution of the compounds revealed that the compounds with stronger cytotoxicity showed higher accumulation rates in the mitochondria. Our findings suggest that the electronic state of tellurium atoms in DPDTe play an important role in accumulation and distribution of DPDTe in cultured cells. The present study supports the hypothesis that nucleophilic organometallic compounds, as well as electrophilic organometallic compounds, exhibit cytotoxicity by particular mechanisms.     

Scavenging of Siliceous Grain-Boundary Phase of 8-mol%-Ytterbia-Stabilized Zirconia without Additive

The grain-boundary conductivity (ς_gb) of 8-mol%-ytterbia-stabilized zirconia increased markedly with heat treatment between 1000° and 1300°C with a slow heating rate (0.1°C/min) before sintering. The extent of the ς_gb improvement was the same or larger than that via Al₂O₃ addition. The heat treatment did not affect the grain-interior conduction when sintered at 1600°C, while Al₂O₃-derived scavenging significantly did, given the larger increment of total conductivity in the heat-treated sample. The formation of a silicon-containing phase in a discrete form was suggested as a possible route of scavenging the resistive phase from the correlation between average grain size and ς_gb.     

双向HFC网络特点与回传通路分析

1　概述现有ＣＡＴＶ电缆网基本上都是星树型结构 ,此结构适合于信号在网上做单向分配 ,具有造价低 ,施工方便等特点 ;而对于光缆网 ,则以星型结构较多。因此 ,光纤电缆混合网 (ＨＦＣ)多采用星型光缆干线传输 ,电缆部分采用树枝型把信号分配到用户。随着ＣＡＴＶ网络上多功能业务特别是数据业务的增加 ,对ＣＡＴＶ网络的要求大大提高了。因此 ,在网络改造中 ,为了提高网络的可靠性 ,提出了自愈环型网络结构 ,并逐步为大家所接受。这种网络中 ,每个分前端都从左、右两个方向接收来自总前端的电视信号 ,环路上任何一处光缆故障都不会导致信号…