Lithiophilic MXene-Guided Lithium Metal Nucleation and Growth Behavior

The positive effects of a lithiophilic substrate on the electrochemical performance of lithium metal anodes are confirmed in several reports, while the understanding of lithiophilic substrate-guided lithium metal nucleation and growth behavior is still insufficient. In this study, the effect of a lithiophilic surface on lithium metal nucleation and growth behaviors is investigated using a large-area Ti₃C₂T_x MXene substrate with a large number of oxygen and fluorine dual heteroatoms. The use of the MXene substrate results in a high lithium-ion concentration as well as the formation of uniform solid–electrolyte-interface (SEI) layers on the lithiophilic surface. The solid–solid interface (MXene-SEI layer) significantly affects the surface tension of the deposited lithium metal nuclei as well as the nucleation overpotential, resulting in the formation of uniformly dispersed lithium nanoparticles ( ≈ 10–20 nm in diameter) over the entire MXene surface. The primary lithium nanoparticles preferentially coalesce and agglomerate into larger secondary particles while retaining their primary particle shapes. Subsequently, they form close-packed structures, resulting in a dense metal layer composed of particle-by-particle microstructures. This distinctive lithium metal deposition behavior leads to highly reversible cycling performance with high Columbic efficiencies >  99.0% and long cycle lives of over 1000 cycles.     

超疏水涂层的制备及其在金属防腐领域的应用研究进展

由于超疏水材料表面的特殊结构和高疏水性，当其应用在金属表面时，能有效阻止金属基材与腐蚀介质的接触，从而大幅度地提高金属材料的耐腐蚀性能及使用寿命。首先对固体表面浸润理论以及超疏水材料的基础理论进行阐述；然后，介绍了在金属材料表面制备超疏水涂层的常用工艺技术；最后，总结并讨论了超疏水表面涂层在钢、铝和镁等金属材料上的近期发展与应用状况。     

Subdivision based isogeometric analysis for geometric flows

We present a new isogeometric analysis (IGA) approach based on extended Loop subdivision scheme for solving various geometric flows defined on subdivision surfaces. The studied flows include the second-order, fourth-order, and sixth-order geometric flows, such as averaged mean curvature flow, constant mean curvature flow, and minimal mean-curvature-variation flow, which are generally derived by minimizing the associate energy functionals with $L^2$-gradient flow respectively. The geometric flows are discretized by means of subdivision based IGA, where the finite element space is formulated by the limit form of the extended Loop subdivision for different initial control meshes. The basis functions, consisting of quartic box-splines corresponding to each subdivided control mesh, are utilized to represent the geometry exactly. For the cases of the evolution of open surfaces with any shape boundary, high-order continuous boundary conditions derived from the mixed variational forms of the geometric flows should be implemented to be consistent with the isogeometric concept. For time discretization, we adopt an adaptive semi-implicit Euler scheme. By several numerical experiments, we study the convergence behaviors of the proposed approach for solving the geometric flows with high-order boundary conditions. Moreover, the numerical results also show the accuracy and efficiency of the proposed method.     

Reducing resistance and curing temperature of silver pastes containing nanowires

Low temperature silver pastes can be widely applied on thin-film switch, flexible printing line and touch screen. In this article, we investigated printability and conductivity of silver pastes with silver wires of different diameters and content, and the conductivity of the silver pastes cured at different temperatures filled with different types silver powders and silver wires. The sheet resistance of silver pastes cured at 100 °C with Ag1 powders and Ag2 powders filled with 10 wt% silver wires of 100 nm diameters is 21.93?±?1.63 and 23.16?±?1.44 Ω/□, which is lower than the same samples cured at 135 °C without silver wire fillers. Tap density of Ag1 and Ag2 powders mixed with silver nanowires is higher than that of Ag3 powders mixed with nanowires, due to a higher filling ratio of Ag1 and Ag2 powders with silver nanowires. SEM results show silver pastes filled with Ag1 and Ag2 powders formed network when silver nanowires were added.     

Toward High-Performance Dihydrophenazine-Based Conjugated Microporous Polymer Cathodes for Dual-Ion Batteries through Donor–Acceptor Structural Design

Recent studies have demonstrated that dihydrophenazine (Pz) with high redox-reversibility and high theoretical capacity is an attractive building block to construct p-type polymer cathodes for dual-ion batteries. However, most reported Pz-based polymer cathodes to date still suffer from low redox activity, slow kinetics, and short cycling life. Herein, a donor–acceptor (D–A) Pz-based conjugated microporous polymer (TzPz) cathode is constructed by integrating the electron-donating Pz unit and the electron-withdrawing 2,4,6-triphenyl-1,3,5-triazine (Tz) unit into a polymer chain. The D–A type structure enhances the polymer conjugation degree and decreases the band gap of TzPz, facilitating electron transportation along the polymer skeletons. Therefore the TzPz cathode for dual-ion battery shows a high reversible capacity of 192 mAh g⁻¹ at 0.2 A g⁻¹ with excellent rate performance (108 mAh g⁻¹ at 30 A g⁻¹), which is much higher than that of its counterpart polymer BzPz produced from 1,3,5-triphenylbenzene (Bz) and Pz (148 and 44 mAh g⁻¹ at 0.2 and 10 A g⁻¹, respectively). More importantly, the TzPz cathode also shows a long and stable cyclability of more than 10 000 cycles. These results demonstrate that the D–A structural design is an efficient strategy for developing high-performance polymer cathodes for dual-ion batteries.     

Nitrate Additives Coordinated with Crown Ether Stabilize Lithium Metal Anodes in Carbonate Electrolyte

Lithium metal anodes (LMAs) are promising for next-generation batteries but have poor compatibility with the widely used carbonate-based electrolytes, which is a major reason for their severe dendrite growth and low Coulombic efficiency (CE). A nitrate additive to the electrolyte is an effective solution, but its low solubility in carbonates is a problem that can be solved using a crown ether, as reported. A rubidium nitrate additive coordinated with 18-crown-6 crown ether stabilizes the LMA in a carbonate electrolyte. The coordination promotes the dissolution of NO₃⁻ ions and helps form a dense solid electrolyte interface that is Li₃N-rich which guides uniform Li deposition. In addition, the Rb (18-crown-6)⁺ complexes are adsorbed on the dendrite tips, shielding them from Li deposition on the dendrite tips. A high CE of 97.1% is achieved with a capacity of 1 mAh cm⁻² in a half cell, much higher than when using the additive-free electrolyte (92.2%). Such an additive is very compatible with a nickel-rich ternary cathode at a high voltage, and the assembled full battery with a cathode material loading up to 10 mg cm⁻² shows an average CE of 99.8% over 200 cycles, indicating a potential for practical use.     

一种图像校正的偏振光罗盘系统的研究

导航传感器在探险、应急、精确制导武器、船舶、航空器导航和定位系统中起着关键作用。针对偏振光罗盘在倾斜状态下误差较大的问题,提出了一种利用加速度计和陀螺仪对偏振光罗盘进行图像校正的方法,设计了一种基于陀螺仪校正的偏振光罗盘系统。首先利用加速度计和陀螺仪计算得到载体姿态角,对偏振光图像数据进行图像校正,采用Stokes矢量法解算大气偏振模式分布,进而提取导航特征点,最后对特征点进行拟合解算出航向角信息。并且进行了静态和动态测试实验,实验结果表明,该算法能够有效的对偏振光罗盘姿态变化引起的误差进行补偿,可以将偏振光罗盘的航向角测量误差控制在1.86°之内,平均误差为0.09°。