Feasibility study of minor actinide transmutation in light water reactors with various Am/Cm separation efficiencies

A study was conducted to evaluate the feasibility of minor actinide (MA) transmutation in light water reactors (LWR). The purpose of this work was to provide a guide for future investigations into MA transmutation in LWR. This work considered the effects of various Am/Cm separation efficiencies as well as homogeneous and heterogeneous MA bearing fuel assemblies. The MA content was introduced into the reactor as mixed oxide plus minor actinide (MOX + MA) fuel. Three Am/Cm separation efficiencies were independently considered: 99.9%, 99.0%, and 90.0%. In order to evaluate the feasibility of MA transmutation, the fuel performance of the various assemblies and core designs, as well as their respective safety related parameters, were calculated. The reduction of the burden of high level waste (HLW) motivated the investigation of MA transmutation. It was found that the MA bearing fuel assemblies and their subsequent core designs were able to perform within the safety limits required as well as achieving similar burnups to a UO₂ core. The Am transmutation rates were ∼40% for the homogeneous assemblies and up to 68% for the MA targets in the heterogeneous assemblies after the described burnup, however, there was a significant amount of Cm produced during burnup. This Cm production was due to the more favorable neutron capture reaction over fission for Am in the thermal spectrum. Future work should examine the benefits of Am transmutation at the expense of large Cm production rates.     

Preload assessment in patients with an open abdomen

Health care providers and purchasers of health services have an opportunity to improve patient care and potentially save costs through the wise purchase of interactive health communication applications for patients and employees. Purchasing decisions based on evaluation and evidence should drive the design and development of new systems. The cycle of evaluation includes a needs assessment before system development, usability testing during development, and studies of use and outcomes in natural settings. This type of evidence is critical to our understanding of how best to provide health information and decision assistance to patients, employees, and others.     

THREE-DIMENSIONAL NUMERICAL MODELING OF HEAT AND MASS TRANSFER IN A CERAMIC OXYGEN GENERATOR (COG)

A three-dimensional numerical model has been developed to simulate the conjugate heat transfer and the separation of oxygen from air in a single-cell ceramic oxygen generator (COG). Attention is focussed on the temperature distribution in the brittle ceramic electrolyte as a result of heat generated from electrochemical reactions and the resistance to current flow. Investigations conducted to determine the influence on the thermal behaviour of the electrolyte with the presence of metallic current collectors and gas distributors in the model will also be summarised.     

The use of inhaled nitric oxide in a wide variety of clinical problems

Inhaled nitric oxide (NO) clearly decreased pulmonary vascular resistance in pediatric patients with pulmonary hypertension, regardless of the underlying origin of the pulmonary hypertension. In persistent pulmonary hypertension of the neonate (PPHN) and CHD, the use of inhaled NO appears to improve the outcome of these patients. In acute respiratory distress syndrome (ARDS) and surfactant deficiency the role of inhaled NO therapy remains unclear. The use of inhaled NO is safe in a carefully monitored setting with a delivery system designed to minimize the generation of NO2.     

In vivo radiofrequency thermal balloon angioplasty of porcine coronary arteries: histologic effects and safety

The purpose of this study was to assess the safety and histologic effects of radiofrequency thermal balloon angioplasty in the coronary vasculature of normal pigs. Radiofrequency thermal balloon angioplasty was performed in 30 coronary arteries of 16 nonatherosclerotic pigs. Heated inflations were performed at either 50 degrees, 60 degrees, or 70 degrees C for 30 or 60 seconds, and were compared with five nonheated inflations in five additional arteries. All balloon inflations were performed at 2 atm pressure with a balloon/vessel diameter ratio of 1.2 to 1. Heart rate, arterial pressure, and left ventricular pressure were monitored continuously for each animal. A 12-lead ECG, coronary angiography, and two-dimensional transthoracic echocardiography were performed before and 1 hour after each balloon inflation. Each animal was subsequently put to death for postmortem cardiac examination. Heated inflations were well tolerated in 28 of the 30 arteries without significant adverse effects. During one inflation, ventricular fibrillation occurred because of prolonged ischemia from an occlusive guiding catheter. In another artery, a heated inflation resulted in a dissection with a transient decrease in distal coronary flow. Histologic examination revealed a significant increase in wall thinning and elastic fiber straightening with heating at 70 degrees C for both 30 and 60 seconds, and a significant increase in intracoronary thrombus with heating at 70 degrees C for 60 seconds. Depth of periarterial myocardial heat necrosis paralleled the increase in temperature, with an average depth of 166 microns at 50 degrees C, 312 microns at 60 degrees C, and 1031 microns at 70 degrees C. In vivo, radiofrequency coronary angioplasty can be performed relatively safely without significant electrical, hemodynamic, or ischemic changes beyond those seen with conventional nonthermal angioplasty. The extent of heat-induced vessel wall thinning, elastic tissue straightening, intracoronary thrombus formation, and periarterial myocardial necrosis are all related to balloon temperature or duration of heating.     

1H NMR structural analysis of novel potassium blocking toxins using a nano-NMR probe

Fas/APO-1 (CD95), a cell surface cytokine receptor, triggers apoptotic cell death by specific agonist antibody, suggesting that Fas/APO-1 may be a promising target for treatment of tumors. In this study, we show that treatment with anti-Fas antibody effectively induced apoptosis in malignant glioma cell lines with high expression of Fas/APO-1 (n = 3). Malignant glioma cells with low or undetectable expression of Fas/APO-1 (n = 6), however, were resistant to Fas/APO-1-dependent cytotoxicity. The purpose of this study, therefore, was to determine whether resistant tumors could be made susceptible to apoptosis. FADD/MORT1 constitutes a novel protein that associates specifically with the cytoplasmic death domain of Fas/APO-1 and induces apoptosis. We investigated whether overexpression of FADD would induce apoptosis in malignant glioma cells without activating Fas/APO-1. Results indicated that about 85% of malignant glioma cells, regardless of Fas/APO-1 expression levels, underwent apoptosis after transient transfection with FADD expression vector. To further improve gene transfer of FADD into malignant glioma cells, we constructed a retroviral vector containing the FADD gene. The retroviral transfer of FADD gene significantly enhanced the transduction efficiency and effectively inhibited both in vitro and in vivo survival of malignant glioma cells through induction of apoptosis. These findings suggest that the FADD gene is a novel and useful tool for the treatment of malignant gliomas.     

The effect of adrenergic agonists on the systemic response to hemorrhage

An in vivo antitumor screening of extracts of Gomphrena martiana indicated positive activity in the petroleum ether extract, and its further bioactivity-directed fractionation resulted in a lipophilic flavonoid fraction. Upon inoculation of various doses of 5,6,7-trisubstituted flavones on two murine tumor lines, Sarcoma 180 and Ehrlich's carcinoma, a decrease of tumor growth was observed. An in vitro KB cultured cell screen indicated cytotoxicity.