Health benefits of CLA – lessons from pig models in biomedical research

The objective of this review is to highlight the use of pig models for investigating safety, efficacy and the mechanisms of action of conjugated linoleic acid (CLA). Although CLA elicits positive effects in animal models and in vitro systems, a consistent concern in terms of translational research is that the health benefits observed by using these model systems cannot be extrapolated directly into humans. Conversely, the similarities between pigs and humans make the pig an ideal model for examining the health benefits of dietary supplements, functional foods and nutraceuticals. We have developed pig models of viral and bacterial infection to examine the preventive role of dietary CLA supplementation on virally induced immunosuppression and gut health, respectively. Results from these studies indicate that CLA significantly enhances the immune function while limiting the catabolic effects of uncontrolled immune and inflammatory responses. The scientific findings in pig models and human clinical trials demonstrate that CLA modulates immune responses in pigs and humans. Pig models of immunomodulation represent significant improvements over other animal models and in vitro systems because they mimic more closely the compartmentalization of the human immune system and the clinical presentation of human infectious, immune and inflammatory diseases.     

Morphology and characterization of conductive films based on polyaniline‐coated polystyrene latexes

The polyaniline (PANI)‐coated polystyrene (PS) latexes were synthesized, and the electrically conductive films were prepared thereafter. The weight ratio of PANI was 5%. Thermal analysis of the latices was performed using DSC and TGA. In this study, the electrically conductive films were prepared above the PS glass transition temperature (T_g). During the film formation, the effects of the annealing temperature and atmosphere (air or N₂) on the film resistance were investigated. In addition, the film morphology was observed utilizing scanning electron microscopy. The film resistance decreased in the initial heating stage due to the increasing temperature and the compaction of film. Then the film resistance increased with further annealing due to the aging of PANI. Typically, the film resistance was about 6000 Ω/sq, and the conductivity was 0.3 S/cm. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5406–5413, 2006     

Liquid-phase adsorption of dyes and phenols using pinewood-based activated carbons

Physical properties of activated carbons prepared from pinewood at different activation times (0.5, 1.5, 2.7, and 4.0 h) in steam at 900 °C were studied. The adsorption equilibria and kinetics of three dyes and three phenols (phenol, 3-chlorophenol, and o-cresol) from aqueous solutions on such carbons were then examined at 30 °C. The adsorption isotherms of phenols could be well fitted by the Freundlich equation, and those of dyes were adequately described by the Langmuir-Freundlich equation. The effect of microporosity of the carbons on adsorption capacity was explored. Four simplified kinetic models including pseudo-first-order equation, pseudo-second-order equation, intraparticle diffusion model, and the Elovich equation were selected to follow the adsorption processes. The adsorption of all six adsorbates could be best described by the Elovich equation. The kinetic parameters of this best-fit model were calculated and discussed.     

Identification of the combustion behaviour of lignite char between 350 and 900 °C

The combustion behaviour of four different lignite samples pyrolysed at 800 and 1000 °C has been studied. The reaction order and the activation energy of the char combustion reaction can be easily determined from the time to reach 50% conversion. Under 550 °C the reaction order of lignite samples are 0.7 and the activation energies are 27.4–27.9 kcal gmole^?1. Above 550 °C the measurement of the intrinsic reaction rate is limited by the film diffusion resistance. The pyrolysis temperature affects the reactivity significantly. The reactivity of char pyrolysed at 800 °C is 3.5 times that of char pyrolysed at 1000 °C.     

Moisture absorption behavior of rubber‐modified epoxy resins

The moisture absorption behavior of diglycidyl ether of bisphenol A/ethylene diamine resins incorporating a carboxy‐terminated butadiene–acrylonitrile rubber was investigated and associated with their morphology of phase separation. Although the diffusion coefficient of moisture was increased with the rubber content, its activation energy and free volume for moisture diffusion were barely changed until phase inversion occurred. After phase inversion, the free volume was significantly increased, and the activation energy decreased. In addition, the moisture absorption also reduced the β‐transition temperature of the resins and slightly increased the glass‐transition temperature before phase inversion. However, the reverse was found after phase inversion. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3718–3724, 2002     

Influence of polymer molecular weight on selected thermodynamic properties of polymer/solvent systems and the application of the UNIFAC theory

The intrinsic viscosities of eleven narrow molecular weight distribution polystyrene samples ranging from number-average molecular weight 1820 to 1 292 000 have been determined in pure solvents of tetrahydrofuran and chloroform with a Ubbelohde No. 1 viscometer at 25°C. By combining the original and modified Fox-Flory viscosity treatments, respectively, with the Flory-Huggins Lattice theory, the interaction parameters were calculated. With the aid of original and modified UNIFAC methods the solvent activity, clustering function of the solvent, and the interaction parameter were computed and compared with the experimental data. It was established that the influence imposed by the polymer molecular weight on the activity of the solvent, the clustering function of solvent, and interaction parameter is insignificant. The modified UNIFAC method satisfactorily predicted the solvent activity as illustrated by previous investigators. However, both UNIFAC methods failed to predict the interaction parameter.     

Nanoscratch testing to assess the fiber adhesion of short‐carbon‐fiber composites

In a composite material, the degree of adhesion between the fiber and the matrix plays an important role in the overall performance of the material. Because the load between the fiber and the matrix is realized throughout the interphase region material, a lot of effort has gone into characterizing the strength of the interphase. In this study, nanoscratch tests on the composite samples were used to provide a relative measure of adhesion in different composite materials. Carbon‐filled nylon 6,6 and polycarbonate resins were evaluated with this method. The carbon fillers we used were polyacrylonitrile‐based carbon fibers sized and surface‐treated for the respective matrix and pitch‐based carbon fibers without any sizing or surface treatment. Tensile and X‐ray photoelectron spectroscopy data for the composites we considered are also presented to compare to the nanoscratch results. It is shown that nanoscratch testing on the composites, with the proposed data analysis, can be an effective tool for determining the relative degree of adhesion between different composites. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 328–335, 2007     

Nanosized silica‐supported metallocene/MAO catalyst for propylene polymerization

A nanosized silica particle was used as the support to prepare an Et[Ind]₂ZrCl₂/MAO catalyst for propylene polymerization of polypropylene. The catalyst and the polymer produced were characterized with nitrogen adsorption, ICP, DSC, SEM, TEM, XRD, solution viscometer, ¹³C NMR and optical microscopy. The effects of polymerization temperature and [Al]/[Zr] ratio on catalyst activity and polymer melting point were investigated. Under identical reaction conditions, nanosized catalyst exhibited better polymerization activity than the microsized catalyst (e.g., the former had 64% higher activity than the latter at the optimum polymerization temperature (50°C) and [Al]/[Zr] = 570). DSC results indicated that polymer melting point increased with the increase of [Al]/[Zr] ratio and with the decrease of polymerization temperature. XRD results showed that the percentage of γ crystals increased with decreasing [Al]/[Zr] ratio. Electron microscopic results showed that the polymer particle size increased with increasing polymerization temperature. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2573–2580, 2006     

Study of SO2 adsorption and thermal regeneration over activated carbon-supported copper oxide catalysts

The mechanisms of SO₂ adsorption and regeneration over activated carbon-supported copper oxide sorbent/catalysts were analyzed. Studies were carried out in a fixed-bed reactor equipped with a non-dispersive infrared gas analyzer to detect the reaction products and by using X-ray powder diffraction (XRPD) and temperature-programmed desorption (TPD) experiments to characterize the nature of the sulfate species and surface oxygen complexes. The results indicate that SO₂ was catalytically oxidized to SO₃ over a copper phase in the presence of gaseous oxygen, and then reacted with a copper site to form a sulfate linked to copper without desorption into the gas phase. The activated carbon support did not participate in this sulfation reaction. After the adsorption of SO₂, the exhausted sorbent/catalysts could be regenerated by direct heat treatment in inert gas at temperatures between 260 and 480 °C, while the neighboring surface oxygen complexes on the carbon surface were acting as the reducing agents to reduce CuSO₄ to Cu. During the subsequent adsorption process, the copper is rapidly oxidized by oxygen in the flue gas.     

Maceral and rank influences on the morphology of coal char

Concentrates of vitrinite and inertinite macerals have been pyrolysed in a flame under conditions representative of the initial stages of pulverized coal combustion. Char was distinguished from soot by size analysis and the char yield correlated with the proximate analysis. The char morphology was studied by optical microscopy and quantitative measurements of porosity and pore size were made using image analysis. Vitrinite and inertinite produce chars of characteristic morphology. The softening behaviour of inertinite varies with coal rank and can be related to the optical reflectance. The porosity of vitrinite chars approaches that of inertinite chars at high rank.