High-temperature strength and thermal stability of a unidirectionally solidified Al2O3/YAG eutectic composite

A unidirectional solidification method was investigated to manufacture Al2O3/YAG eutectic composites with high-temperature resistance that would make them usable at very high temperatures. We were successful in manufacturing a single-crystal Al2O3/single-crystal YAG eutectic composite with a dimension of 40 mm in diameter and 70 mm in length containing no colonies or pores. This composite also displayed excellent high-temperature strength characteristics. The flexural strength was in the range 350400 MPa from room temperature up to 2073 K (just below its melting point of about 2100 K) with no apparent temperature dependence. During tensile tests above 1923 K, the eutectic composite showed evidence of plastic deformation occurring by dislocation motion, and a yield phenomenon similar to many metals was observed. In addition, the microstructure of the composite was extremely stable: after 1000 h of heat treatment at 1973 K in an air atmosphere there was no growth. The above superior high-temperature characteristics are caused by such factors as the eutectic composite having a single-crystal Al2O3/single-crystal YAG structure, the formation of a compatible interface with no amorphous phase and thermal stability, and the combined effect of a YAG phase with superior high-temperature characteristics. © 1998 Chapman & Hall     

Recommended NDT Practice and its Model-based Investigation for Eddy Current Inspection of Aerospace Structures

This paper describes a model-based investigation of inspection standards being developed as a recommended practice for eddy current (EC) NDT of aerospace structures for surface cracks. Compared to experimental investigations that can be laborious and expensive, model-based approach provides cost-effective and quantitative verifications of the recommended practice that covers wide ranges of materials, probes, instruments, frequencies, and test conditions. Probe signals for a number of specified standard notches are predicted and the expected amplitudes and phase-angle ranges are determined for various test conditions, in order to examine the influence of material electrical conductivity, frequency, and probe types. For a few selected situations, the model predictions are validated against experimental data. This study verifies the adequacies of the recommended specifications, especially of the reference notch selections and their response amplitudes for various test conditions, as well as confirming the suitability of using vertical amplitude alone for all the test situations. The influence of probe cable and the issue of three-point calibration are also discussed specifically in this investigation.     

Plan for first phase of safety demonstration tests of the High Temperature Engineering Test Reactor (HTTR)

Safety demonstration tests using the High Temperature Engineering Test Reactor (HTTR) will be conducted for the purpose of demonstrating inherent safety features of High Temperature Gas-cooled Reactors (HTGRs) as well as providing the core and plant transient data for validation of HTGR safety analysis codes. The first phase safety demonstration test items include the reactivity insertion test and the coolant flow reduction test. In the reactivity insertion test, which is the control rod withdrawal test, one pair out of 16 pairs of control rods is withdrawn, simulating a reactivity insertion event. The coolant flow reduction test consists of the partial loss of coolant flow test and the gas circulators trip test. In the partial loss of coolant flow test, primary coolant flow rate is slightly reduced by control system. In the gas circulators trip test one and two out of three gas circulators are run down, simulating coolant flow reduction events. The gas circulators trip tests, in which position of control rods are kept unchanged, are simulation tests of anticipated transients without scram (ATWS).     

Route guidance by a car navigation system based on augmented reality

Car navigation systems play a prominent role in road traffic safety and traffic regulation. However, it is necessary to improve the route guidance of car navigation systems so that they accurately and quickly recognize small differences in location. Thus, to increase the ease of understanding and safety of car navigation systems, navigation systems based on augmented reality have been proposed for providing guidance at road intersections. We are currently developing a car navigation system based on augmented reality, called AR‐Navi. We investigated designs for the display of road intersection guidance that can be easily understood even when limited information is available and proposed a “best shot” display method that does not use moving images. In addition, we implemented a prototype system that includes these methods and conducted driving experiments on public roads to evaluate the ease of understanding and safety of AR‐Navi. Using the evaluation results, we confirmed that the ease of understanding and safety is similar in the case of AR‐Navi and CG‐Navi. We also clarified the characteristics of AR‐Navi. © 2012 Wiley Periodicals, Inc. Electr Eng Jpn, 180(2): 43–54, 2012; Published online in Wiley Online Library (wileyonlinelibrary.com). DOI 10.1002/eej.22278     

A counterexample to the multifractal rigidity conjecture of piecewise linear Markov maps of the interval

A multifractal rigidity is the phenomena that the coincidence with the two multifractal spectra implies more strong relation between the given two dynamical systems. For the dimension spectrum of a Bernoulli measure defined on a repeller of a piecewise linear Markov map, Barreira, Pesin and Schmeling proved that a rigidity holds if the repeller is modelled by the full shift of two symbols. It was an open problem whether this rigidity holds in the case of three or more symbols. We give a negative answer to this problem by constructing a counter-example and we show that our counter-example is the unique one in the case of three symbols.     

Moisture profiles of wheat noodles containing hydroxypropylated tapioca starch

Wheat noodles were prepared using flour to which hydroxypropylated tapioca starch was added, and the effect of this addition on the moisture distribution within the noodles during cooking was examined using a digital image processing technique. The addition of the modified starch slightly increased the moisture content and narrowed the flat distribution near the noodle surface. The distribution features reflected the changes in the water absorption behaviour caused by the properties of the modified starch and the reduction in the gluten content. Addition of the modified starch lowered Young's modulus and the energy for 99% strain of the noodles in the texture analysis to, at maximum 35% and 65%, and decreased the breakability of the noodles. These changes in the moisture distribution and textural properties have been ascribed to changes in both the state of the starch granules near the surface and the structure of the gluten network.     

Euphorbia tirucalli β-Amyrin Synthase: Critical Roles of Steric Sizes at Val483 and Met729 and the CH–π Interaction between Val483 and Trp534 for Catalytic Action

The functions of Val483, Trp534, and Met729 in Euphorbia tirucalli β-amyrin synthase were revealed by comparing the enzyme activities of site-directed mutants against that of the wild type. The Gly and Ala variants with a smaller bulk size at position 483 predominantly afforded monocyclic camelliol C, which suggested that the orientation of the (3S)-2,3-oxidosqualene substrate was not appropriately arranged in the reaction cavity as a result of the decreased bulk size, leading to failure of its normal folding into the chair–chair–chair–boat–boat conformation. The Ile variant, with a somewhat larger bulk, afforded β-amyrin as the dominant product. Intriguingly, various variants of Trp534 exhibited significantly decreased enzymatic activities and provided no aberrantly cyclized products, although the aromatic Phe and Tyr residues were incorporated and the steric sizes of the aliphatic residues were altered. Therefore, the Trp534 residue does not stabilize the transient cation through a cation–π interaction. Furthermore, the Trp residue, with the largest steric bulk among all natural amino acids, is essential for high enzymatic activity. Robust CH–π complexation between the Val483 and Trp534 residues is proposed herein. Altering the steric bulk at the Met729 position afforded the pentacyclic skeletons. Thus, Met729 is positioned at the E-ring formation site. More detailed insights into the functions of the Val483, Trp534, and Met729 residues are provided by homology modeling.     

Multiple uses of Essential Oil and By-Products from Various Parts of the Yakushima Native Cedar (Cryptomeria Japonica)

This article presents multiple potential uses of the Yakushima native cedar (Cryptomeria japonica), known in Japan as the Yaku-sugi tree. The Yaku-sugi was divided into four parts: leaves, branches with leaves, branches, and stems. We obtained the essential oil, hydrosol, distillation residue, and distillation wastewater from the trees. Essential oil and hydrosol were determined to be volatile organic compounds. All samples were screened for the following bioactivities: antioxidative, antibacterial, and anti-melanogenesis activities. Freeze-dried distillation residue was tested to assess whether it had a deodorizing effect. The main component of the leaf essential oil was found to be monoterpenes. In contrast, the stem essential oil mainly contained sesquiterpenes. In terms of bioactivities, the leaf essential oil showed antibacterial activity and the stem essential oil showed anti-melanogenesis activity. Distillation residue and wastewater showed many activities, including antioxidant, antibacterial, and anti-melanogenesis activities. Moreover, the residue had a deodorizing effect against ammonia.